Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://d911api.datadial.net/images/schemaLogo.png https://d911api.datadial.net/images/schemaLogo.png +443456003478 https://d911api.datadial.net Facebook Instagram

Kits

About Kits

Kits for Porsche

Design911 offers an extensive selection of package deals for Porsche parts, providing an ideal solution for Porsche enthusiasts looking to upgrade, maintain, or personalise their vehicles. These packages are thoughtfully curated to include complementary components, helping with compatibility and overall cost-effectiveness.

A Quick Look at Kits

Kits information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.

Choosing the Right Fit for Your Porsche

Where Kits are listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, axle or side, and any option codes or connector types where relevant.

  • Typical reasons people choose kits include wanting all the right Porsche parts in one order, reducing the risk of missing seals, clips, or one-time-use fixings, and saving workshop time.
  • Kits help ensure matched components (for example, brake refresh kits, service kits, or suspension refresh kits) so parts work together as intended.
  • Common real-world triggers include repeated failures because a small supporting part was not replaced, mixed part revisions, or mismatched specification between components.
  • If problems occur, they are often traced to incorrect vehicle selection, old core components not addressed, or installation shortcuts rather than the kit itself.
  • Before you start work, compare the kit contents with the Porsche PET diagram and your job list so you know exactly what is included and what may still be needed.
  • Always confirm whether kits are vehicle-specific, and check if bolts, clips, fluids, and other one-time-use hardware are included or need to be added separately.

Browse by Category

If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.

Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, increased stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.

  • Check whether new fitting kits and wear sensors are included or should be added separately.
  • Confirm if parts are OE-equivalent replacements or higher-friction performance upgrades before ordering.

Brake Pads Packages — Brake pad packages group matched front and rear sets, making it easier to renew all pads at once for consistent feel and balance across the axle. Worn pads can cause squealing, low pedal feel, longer stopping distances and may score discs if run down to the backing plates.

  • Verify whether the package covers front, rear, or both axles and whether it is a standard or performance compound.
  • Check the contents list for anti-squeal shims, hardware and any wear sensors you may want to replace at the same time.

Gearbox / Transmission — You change gearbox and transmission parts when you have shifting issues, noise, leaks, or you are refreshing a high-mileage drivetrain. It is also common during clutch upgrades or ratio changes. Typical symptoms include whining in a specific gear, crunching on shifts, or difficulty selecting gears, as well as leaks at seals or casing joints.

  • Not all noise or poor shifting means the gearbox itself is failing—mounts, linkage, clutch, and oil condition can produce similar symptoms.
  • Using the correct-spec gearbox oil and refreshing it is often a sensible first step before major work.

Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected. Doing this on schedule reduces wear, helps prevent breakdowns, and maintains performance—especially on older Porsche models where neglected servicing can quickly lead to costly repairs. Symptoms prompting attention include hard starting, rough idle, reduced fuel economy and poor throttle response.

  • Both OEM and reputable aftermarket parts can be suitable—always match the correct specification for your Porsche.
  • Keeping a clear service log helps diagnostics later and can support the car’s resale value.

Service Kits — Service kits bundle the correct parts for a routine Porsche service into one package, reducing ordering mistakes and ensuring you can reset the car to a known maintenance baseline. They are ideal when catching up on overdue work or planning regular servicing to a consistent standard. Symptoms leading to a full kit are often general, such as sluggish running, inconsistent idle, poor economy, or increased engine noise from old oil and filters.

  • Service kits typically include filters and key consumables, but contents vary—check the list carefully and add any extra items you want to replace while access is good.
  • Kits are usually specific to model, year and engine, so confirm these details before ordering.

Explore Kits at Design911

View the current Kits range for Porsche at Design911, then filter by model and category to narrow down to the right parts and packages for your project.

DISPLAYING 449 to 464 (of 2532 products)
93010432150/2KIT
Product Information
Product Information
SET OF 12 valve guides - 1st Oversize -  Inlet x6 and exhaust x6.

This set of 12 consists of twelve valve guides 93010432150 (first oversize) allowing you to replace the guides in all cylinders of your Porsche engine in one comprehensive package. Ideal for a full cylinder head rebuild, this matched set ensures uniform fitment across all cylinders and simplifies parts procurement.

Fits:
Porsche 911 1965 - 1989

Outer diameter: 13,26 mm,
Bore Ø: 9,00 mm,
Length: 51,20 mm,
Fitting Position: Intake Side

Diagram Ref No 2.

  Position on Vehicle: All valve positions across the engine’s cylinder heads where intake/exhaust guides are located.

 Applications: Recommended when undertaking a full head rebuild, especially after seat machining, guide bore wear or when aiming for consistent component age across all cylinders.

Replacing all valve guides together ensures even wear characteristics, consistent valve movement and avoids mixing new guides with old worn ones which may compromise engine balance or longevity.

When to replace full set:
  Full cylinder head rebuild including seat work, milling or guide bore enlargement.
  Engine showing symptoms of widespread valve guide wear (smoke, oil consumption, play) across multiple cylinders.
  When aiming for maximum long-term reliability and standardised new parts across the engine.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010432150
93010432150

The product you are viewing cross references to these numbers
CONTROLARM970.RR
Product Information
Product Information
Complete Rear Lower and Upper Control Arm set, includes:
2x 97033104700 (upper control arms)
4x 97033104300 (upper outer track control arms)
1x 97033104104 (left lower wishbone)
1x 97033104204 (right lower wishbone)
 A genuine OE Porsche fitting kit (bolts, washers, nuts, alignment shims as required)

Each arm is engineered to replicate the original Porsche equipment, including correct geometry, premium bushings, and exact mounting points. The fitting kit ensures all factory-specified fasteners and alignment shims are included for a seamless install. This unified kit restores both the upper and lower rear axle linkages, giving you full axle symmetry, correct handling behaviour and reinstated ride quality.

Fits:

Porsche 970 Panamera 2010 - 2016

Diagram ref no:  8, 9, 15, 18, 19, 20 (upper)
Diagram ref no: 10, 13, 14, 15, 16, 17 (lower)

Position on Vehicle: 
Rear suspension lower track control arms (left & right) - connecting rear sub-frame to wheel carrier.
Rear suspension upper centre and upper outer track arms - linking sub-frame and wheel carrier at upper level.

 Applications: 
Ideal for vehicles where the rear suspension arms and bushings are worn, exhibiting play, knocking, or uneven tyre wear - or when performing a full rear axle suspension upgrade for maximum performance and durability.

The rear upper and lower control arms are fundamental to wheel location, suspension articulation, alignment retention and handling precision. Worn arms or degraded bushings can cause rear-end instability, excessive play, uneven tyre wear, clunks and compromised ride quality. This full-axle kit ensures matched new components on both sides of the rear axle, restores correct rear suspension geometry, supports tyre life and preserves your vehicle’s dynamic performance.

When and why to replace:
Observable play or clunking in the rear suspension when accelerating, braking or cornering.
Uneven or abnormal rear tyre wear, or alignment out of specification.
During major rear suspension service (bushings, links, shocks, sub-frame work) when access is given.
High-mileage Panamera where the original rear arms are likely fatigued and near end-of-service life.
 You want matched axle performance and avoid uneven behaviour by replacing only one side.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

CONTROLARM970.RR
97033104300
97033104700
99733121702
99633121702
WHT007492
97033121900
99907285101
99908444501
97033104104
97033104103
97033104102
97033104204
97033104203
97033104202
99907285701
99907285401
99633121900
PAF007648
97034121700
WHT008736

The product you are viewing cross references to these numbers
97033104X04/1KIT
Product Information
Product Information
Complete Rear Lower track control arm set, includes:
1x 97033104104  (left lower wishbone)
1x 97033104204  (right lower wishbone)
 A genuine OE Porsche fitting kit (bolts, washers, nuts, alignment shims as required)

Together, these components offer a complete rear lower suspension refresh. Each control arm is manufactured to match original Porsche equipment in terms of geometry, material, bushings and mounting points - ensuring restored capability for alignment, ride comfort and handling precision.

Fits:

Porsche 970 Panamera 2010 - 2016

Diagram ref no 10, 13, 14, 15, 16, 17

Position on Vehicle: Rear suspension, lower track control arm positions - one each side of the rear axle, connecting wheel carrier to sub-frame and controlling lateral movement under load.

 Applications: Ideal when one or both of the rear lower track arms are worn, bushings are degraded, or when performing a full rear suspension refresh to restore alignment, ride quality and handling balance.

The rear lower track control arms are crucial to maintaining accurate wheel positioning, alignment and rear-end stability under acceleration, braking and cornering. When the arms or bushings are worn, you may experience rear instability, uneven tyre wear, clunks when cornering or general degradation of handling. Replacing them restores full factory geometry, improves ride comfort and reduces wear on related suspension components.

When and why to replace:
Noticeable play or clunking in the rear suspension under load or when driving over uneven surfaces.
Uneven rear tyre wear or rear alignment constantly drifting out of spec.
After replacement of other suspension components (rear bushes, track arms, shock absorbers) where access is granted.
High-mileage Panamera where original track arms/bushings are likely fatigued.
 If you’re looking for a matched-axle solution to ensure both sides of the rear suspension perform identically, rather than replacing just one side.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97033104X04
97033104104
97033104103
97033104102
97033104204
97033104203
97033104202
99907285701
99907285401
99908444501
99633121900
PAF007648
97034121700
WHT008736

The product you are viewing cross references to these numbers
ENGINEKIT15
Product Information
Product Information

Comprehensive Engine Timing Chain Kit for PORSCHE 996 3.6L M96.03 / 997 3.6L M96.05 / 997 3.8L M97.01 / Boxster / Cayman

Restore the integrity of your M96.03 / M96.05 / M97.01 engine’s timing system with this complete timing chain kit. 

Fits: 

  •       Porsche Boxster 986 2.7L 2003-04

  •       Porsche Boxster S 986 3.2L 2003-04
  •       Porsche Boxster 987 2.7L 2005 -08/08
  •       Porsche Boxster 987 S 3.2/3.4L 2005-08/08
  •       Porsche 996 C2 3.6L 09/01-2005
  •       Porsche 996 C4 3.6L 09/01-2005
  •       Porsche 996 C4S 3.6L 09/01-2005
  •       Porsche 997 MK1 Carrera 2 3.6L 2005-08
  •       Porsche 997 MK1 Carrera 2S 3.8L 2005-08
  •       Porsche 997 MK1 Carrera 4 3.6L 2005-08
  •       Porsche 997 MK1 Carrera 4S 3.8L 2005-08
  •       Porsche Cayman 2.7L 987C 2006-08
  •       Porsche Cayman S 3.4L 987C 2005-08


What is an Engine Timing Chain?

The timing chain is a vital component in an internal combustion engine, responsible for synchronizing the rotation of the crankshaft and camshafts. This precise coordination ensures that engine valves open and close at the correct times during each cylinder’s intake and exhaust strokes, allowing for smooth performance and efficiency.

While designed to last the lifetime of the engine, timing chains can wear, stretch, or become damaged. A worn chain can alter engine timing, strain the tensioners, and, if left unaddressed, lead to catastrophic engine damage and costly repairs. 

Signs of Timing Chain Kit Failure

Noise: A failing timing chain often produces a rattling or slapping noise, particularly noticeable at startup, idle, or during acceleration.

Reduced Performance: Stretched or worn chains can disrupt engine timing, resulting in sluggish acceleration, reduced power, or poor overall performance.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

ENGINEKIT15
99610515201
99610517158
99610516651
90007548601
99610518058
99610516555
99610518602
99610518802
9A700836500
99610515600
99610515801
99610505401
99610516804
99610516400

The product you are viewing cross references to these numbers
ENGINEKIT997
Product Information
Product Information

Comprehensive Engine Timing Chain Kit for M97.01 and M96.05 Engines

Restore the integrity of your engine’s timing system with this complete timing chain kit. First generation 997 engines are equipped with 3  chains. This kit replaces all chains along with the associated guides, tensioners, and hardware for a full system refresh.

Fits: 

  • Porsche 997 Carrera 3.6L 2005-2008
  • Porsche 997 Carrera S 3.8L 2005-2008

What is an Engine Timing Chain?

The timing chain is a vital component in an internal combustion engine, responsible for synchronizing the rotation of the crankshaft and camshafts. This precise coordination ensures that engine valves open and close at the correct times during each cylinder’s intake and exhaust strokes, allowing for smooth performance and efficiency.

While designed to last the lifetime of the engine, timing chains can wear, stretch, or become damaged. A worn chain can alter engine timing, strain the tensioners, and, if left unaddressed, lead to catastrophic engine damage and costly repairs. 

Why Replacement Matters:
The timing chain system is crucial for synchronising crankshaft and camshaft timing. Mis-timed engine can lead to loss of power, increased emissions or catastrophic internal damage. Over time chains stretch, guides wear and tensioners degrade, compromising timing accuracy. A full timing chain replacement restores correct timing, enhances engine reliability and protects against future costly repairs.

When and why to replace:
• Audible chain rattle on start-up or at idle.
• Engine mis-timing faults, camshaft sensor codes or rough running.
• Visible chain guide wear or damaged tensioners during disassembly.
• High-mileage engine (> 80,000–100,000 km) where original timing system is aging.
• During an engine rebuild or major service when access to timing system is available.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

ENGINEKIT997
99610515201
99610517158
99610516651
99610516555
99610515600
99610515801
99610505401
99610516400
99610518602
99610518802
99610518058

The product you are viewing cross references to these numbers
97033104X00/1KIT
Product Information
Product Information
Complete Rear Upper Control Arm set, includes:
2x 97033104700 (upper control arms)
4x 97033104300 (upper outer track control arms)
 A genuine OE Porsche fitting kit (bolts, washers, nuts, alignment shims as required)

Together, these components offer a complete rear upper suspension refresh. Each control arm is manufactured to match original Porsche equipment in terms of geometry, material, bushings and mounting points - ensuring restored capability for alignment, ride comfort and handling precision.

Fits:

Porsche 970 Panamera 2010 - 2016

Diagram ref no 8, 9, 15, 18, 19, 20.

Position on Vehicle: Rear suspension, upper level - two centre arms and four outer track arms, connecting the sub-frame to wheel hubs/carrier assemblies.

 Applications: Ideal when the original suspension arms or bushings show wear, excessive play or mis-alignment; or when you are performing a full rear axle suspension overhaul to bring handling back to factory standard.

The rear upper control arms and outer track links play a vital role in locating the wheels, maintaining alignment, and ensuring stable vehicle dynamics. If these components wear or the bushings fatigue, you’ll likely see rear-end instability, uneven tyre wear, clunks under load or degraded handling. Replacing them restores correct rear geometry, improves ride and handling consistency and helps protect other suspension parts.

When and why to replace:
Rear suspension creaking, knocking or excessive play when cornering or accelerating.
Rear tyres showing uneven wear or alignment falling out of spec.
During major rear suspension service (bushings, link arms, subframe removal) - when access allows a full kit change.
High-mileage Panamera where original suspension arms may have reached the end of their service life.
 For full-axle symmetry: when one side is worn, replacing both sides with matched parts eliminates mismatch in performance and handling.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97033104X00
97033104300
97033104700
99733121702
99633121702
WHT007492
97033121900
99907285101
99908444501

The product you are viewing cross references to these numbers
97033104700/1KIT
Product Information
Product Information
Rear upper centre track control arm set, Ref No. 97033104700. 
This Set of 2 includes two 97033104700 control arms — enough for both sides of the rear axle for the Porsche Panamera (970 series). Each arm is manufactured to the same exacting standards, so that left and right sides operate in harmony with equal performance characteristics. This paired set is perfect for a full rear-axle refresh, ensuring matched components and consistent handling.
SET OF 2,  for both sides (left and right).

Fits:
Porsche 970.1 Panamera 2010 - 2013 all models
Porsche 970.2 Panamera 2014 - 2016 all models

Diagram ref no 9

Position on Vehicle: Rear suspension, both upper outer or upper inner arms (as appropriate) for full-axle replacement.
 Applications: Ideal when replacing suspension components on both sides to maintain symmetry, avoid mismatched parts, ensure uniform ride and handling behaviour across the rear axle.

Replacing only one side can lead to mismatched suspension behaviour where one arm is new and the other is old, resulting in uneven wear, asymmetric handling or poor alignment outcomes. A full-set ensures both sides work identically, delivering harmonised performance and maximising the service life of the rear suspension system.

When to replace both:
Both arms show wear or have original bushings and you want uniform performance.
Undergoing major rear suspension service where access is granted to both sides.
Addressing rear-end instability, asymmetric tyre wear or suspension misalignment.
High-mileage vehicle where the rear suspension components across both sides are approaching end-of-life together.
Preventative replacement to avoid repeated labour and downtime.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97033104700
97033104700

The product you are viewing cross references to these numbers
97033104300/1KIT
Product Information
Product Information
Rear upper outer track control arm set. 
This set (4 × 97033104300) provides a comprehensive replacement for the rear upper outer track control arms of both left and right sides of the rear axle - ideal when performing a full rear suspension refresh on the Porsche Panamera (970 series). Each arm is made to the OE specification.
SET OF 4, Set is for both sides (left and right)

Fits:
Porsche 970 Panamera 2011 - 2016

Diagram ref no 8

Position on Vehicle: Rear suspension, upper outer track arms on both left & right sides.
 Cross-Reference / Alternative Numbers: 4 × OEM ref no 970 331 043 00.
  Applications: Recommended when tackling either side wear, when both ends are accessible, or for proactive suspension maintenance to maintain optimal handling symmetry.

Replacing only one side can lead to uneven suspension response, mismatched bushing dynamics or alignment drift. A full-set replacement ensures both sides share the same new-condition components, preserving symmetry, tyre wear and handling balance.

When to replace all four:
Both rear outer track arms show wear or are original units.
After major rear suspension work (bushings, shock absorbers, links) when labour allows access.
When you notice rear-end instability, divergent tyre wear or inconsistent handling.
Higher-mileage Panamera where the original rear suspension components are nearing end-of-life.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97033104300
97033104300

The product you are viewing cross references to these numbers
STEERINGSET987997RHD.R
Product Information
Product Information
Steering rack and power steering pump set for RHD (Right Hand drive) cars,
This set includes:
 1 × Reconditioned Steering Rack (OE reference  997 347 012 09) **
 1 × OE Match Power Steering Pump (OE reference 996 314 050 03)

Fits:
* M657 - for cars with power assisted steering
Porsche 987.1 Boxster 2005 - 2008
Porsche 987C.1 Cayman 2006 - 2008
Porsche 997.1 Carrera 2005 - 2008
Porsche 997.1 Turbo 2007 - 2009
Right Hand Drive (RHD) Cars (like UK)

*** We strongly recommend replacing the power steering pump at the same time as the steering rack. Swarf (metal particles) in the power steering system can circulate and cause damage to both components.

When ordered together, the steering rack and pump can be purchased as a discounted bundle, providing better long-term reliability and value.

If you choose to replace only the steering rack and, upon return of your exchange unit, we discover that the rack bar is scored or contaminated with swarf, this indicates that debris is present in the system. In such cases, we will advise replacing the pump as well — however, it will then be charged at the full retail price plus postage.

Please note: if we have advised that there is swarf in the system and you choose not to replace both components, any future warranty claims related to this issue will not be valid.

** PLEASE NOTE:
 
  • The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
  • Please note, surcharge refunds often take an average of 1 to 2 weeks to be approved by the manufacturer.
  • Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
  • All surcharges and exchanges are subject to our terms and conditions.  


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

STEERINGSET987997RHD.R
411091500322
99631405002
99631405003
99631402004
99631402005
99731402000
99734701209
99734701208
99734701207
99734701205
99734701204
99734701206

The product you are viewing cross references to these numbers
STEERINGSET987997RHD.OE
Product Information
Product Information
Steering rack and power steering pump set for RHD (Right Hand drive) cars,
This set includes:
 1 × Reconditioned Genuine Porsche Steering Rack (OE reference  997 347 012 FX)
 1 × OE Match Power Steering Pump (OE reference 996 314 050 03)

Fits:
* M657 - for cars with power assisted steering
Porsche 987.1 Boxster 2005 - 2008
Porsche 987C.1 Cayman 2006 - 2008
Porsche 997.1 Carrera 2005 - 2008
Porsche 997.1 Turbo 2007 - 2009
Right Hand Drive (RHD) Cars (like UK)

*** We strongly recommend replacing the power steering pump at the same time as the steering rack. Swarf (metal particles) in the power steering system can circulate and cause damage to both components.

When ordered together, the steering rack and pump can be purchased as a discounted bundle, providing better long-term reliability and value.

If you choose to replace only the steering rack and, upon return of your exchange unit, we discover that the rack bar is scored or contaminated with swarf, this indicates that debris is present in the system. In such cases, we will advise replacing the pump as well — however, it will then be charged at the full retail price plus postage.

Please note: if we have advised that there is swarf in the system and you choose not to replace both components, any future warranty claims related to this issue will not be valid.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

STEERINGSET987997RHD.OE
411091500322
99631405002
99631405003
99631402004
99631402005
99731402000
99734701209
99734701208
99734701207
99734701205
99734701204
99734701206
997347012HX
997347012FX

The product you are viewing cross references to these numbers
STEERINGSET986996LHD.OE
Product Information
Product Information
Steering rack and power steering pump set for LHD (Left Hand drive) cars,
This set includes:
 1 × New Genuine Porsche Steering Rack (OE reference 996 347 011 11)
 1 × Power Steering Pump (OE reference 996 314 050 03)

Fits:
* M657 - for cars with power assisted steering
Porsche 986 Boxster 1997 - 2004
Porsche 996 Carrera 1997 - 2004
Left Hand Drive (LHD) Cars (like Europe)

*** We strongly recommend replacing the power steering pump at the same time as the steering rack. Swarf (metal particles) in the power steering system can circulate and cause damage to both components.

When ordered together, the steering rack and pump can be purchased as a discounted bundle, providing better long-term reliability and value.

If you choose to replace only the steering rack and, upon return of your exchange unit, we discover that the rack bar is scored or contaminated with swarf, this indicates that debris is present in the system. In such cases, we will advise replacing the pump as well — however, it will then be charged at the full retail price plus postage.

Please note: if we have advised that there is swarf in the system and you choose not to replace both components, any future warranty claims related to this issue will not be valid.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

STEERINGSET986996LHD.OE
411091500322
99631405002
99631405003
99631402004
99631402005
99731402000
99634701111
99634701110
99634701107
99634701104
99634701105
99634701106

The product you are viewing cross references to these numbers
STEERINGSET986996RHD.OE
Product Information
Product Information
Steering rack and power steering pump set for RHD (Right Hand drive) cars,
This set includes:
 1 × NEW Genuine Porsche Steering Rack (OE reference 996 347 012 11)
 1 × OE Match Power Steering Pump (OE reference 996 314 050 03)

Fits:
* M657 - for cars with power assisted steering
Porsche 986 Boxster 1997 - 2004
Porsche 996 Carrera 1997 - 2004
Right Hand Drive (RHD) Cars (like UK)

*** We strongly recommend replacing the power steering pump at the same time as the steering rack. Swarf (metal particles) in the power steering system can circulate and cause damage to both components.

When ordered together, the steering rack and pump can be purchased as a discounted bundle, providing better long-term reliability and value.

If you choose to replace only the steering rack and, upon return of your exchange unit, we discover that the rack bar is scored or contaminated with swarf, this indicates that debris is present in the system. In such cases, we will advise replacing the pump as well — however, it will then be charged at the full retail price plus postage.

Please note: if we have advised that there is swarf in the system and you choose not to replace both components, any future warranty claims related to this issue will not be valid.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

STEERINGSET986996RHD.OE
411091500322
99631405002
99631405003
99631402004
99631402005
99731402000
99634701210
99634701208
99634701205
96347012087
99634701204
99634701207
99634701206

The product you are viewing cross references to these numbers
STEERINGSET986996LHD.R
Product Information
Product Information
Steering rack and power steering pump set for LHD (Left Hand drive) cars,
This set includes:
 1 × Reconditioned Steering Rack (OE reference 996 347 011 11) **
 1 × Power Steering Pump (OE reference 996 314 050 03)

Fits:
* M657 - for cars with power assisted steering
Porsche 986 Boxster 1997 - 2004
Porsche 996 Carrera 1997 - 2004
Left Hand Drive (LHD) Cars (like Europe)

*** We strongly recommend replacing the power steering pump at the same time as the steering rack. Swarf (metal particles) in the power steering system can circulate and cause damage to both components.

When ordered together, the steering rack and pump can be purchased as a discounted bundle, providing better long-term reliability and value.

If you choose to replace only the steering rack and, upon return of your exchange unit, we discover that the rack bar is scored or contaminated with swarf, this indicates that debris is present in the system. In such cases, we will advise replacing the pump as well — however, it will then be charged at the full retail price plus postage.

Please note: if we have advised that there is swarf in the system and you choose not to replace both components, any future warranty claims related to this issue will not be valid.

** PLEASE NOTE: 
  • The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
  • Please note, surcharge refunds often take an average of 1 to 2 weeks to be approved by the manufacturer.
  • Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
  • All surcharges and exchanges are subject to our terms and conditions.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

STEERINGSET986996LHD.R
411091500322
99631405002
99631405003
99631402004
99631402005
99731402000
99634701111
99634701110
99634701107
99634701104
99634701105
99634701106

The product you are viewing cross references to these numbers
STEERINGSET986996RHD.R
Product Information
Product Information
Steering rack and power steering pump set for RHD (Right Hand drive) cars,
This set includes:
 1 × Reconditioned Steering Rack (OE reference  996 347 012 11) **
 1 × Power Steering Pump (OE reference 996 314 050 03)

Fits:
* M657 - for cars with power assisted steering
Porsche 986 Boxster 1997 - 2004
Porsche 996 Carrera 1997 - 2004
Right Hand Drive (RHD) Cars (like UK)

*** We strongly recommend replacing the power steering pump at the same time as the steering rack. Swarf (metal particles) in the power steering system can circulate and cause damage to both components.

When ordered together, the steering rack and pump can be purchased as a discounted bundle, providing better long-term reliability and value.

If you choose to replace only the steering rack and, upon return of your exchange unit, we discover that the rack bar is scored or contaminated with swarf, this indicates that debris is present in the system. In such cases, we will advise replacing the pump as well — however, it will then be charged at the full retail price plus postage.

Please note: if we have advised that there is swarf in the system and you choose not to replace both components, any future warranty claims related to this issue will not be valid.

** PLEASE NOTE: 
  • The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
  • Please note, surcharge refunds often take an average of 1 to 2 weeks to be approved by the manufacturer.
  • Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
  • All surcharges and exchanges are subject to our terms and conditions.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

STEERINGSET986996RHD.R
411091500322
99631405002
99631405003
99631402004
99631402005
99731402000
99634701210
99634701208
99634701205
96347012087
99634701204
99634701207
99634701206

The product you are viewing cross references to these numbers
EXHFITTING.997.2.5
Product Information
Product Information
Exhaust fitting kit for rear silencers and centre silencer  (18 Parts kit) 

Fits:
Porsche 997 MKII Carrera 3.6L 2009 - 2012
Porsche 997 MKII Carrera S 3.8L 2009 - 2012

Kit Includes:
2 x Cat to silencer gaskets (Diagram Ref 8)
6 x Cat to silencer gasket bolts (Diagram Ref 34)
6 x Cat to silencer gasket nuts  (Diagram Ref 11)
2 x Centre silencer to side silencer clamps (Diagram Ref 16)
2 x Tailpipe clamps (Diagram Ref 22)

* Click on the image to see a large parts diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHFITTING.997.2.5
99711111330
90091000303
99711122030
99711124030
90007536502
N01024426
N 01024426

The product you are viewing cross references to these numbers
STEERINGSET986996LHD
Product Information
Product Information
Steering rack and power steering pump set for LHD (Left Hand drive) cars,
This set includes:
 1 × New Steering Rack (OE reference 996 347 011 11)
 1 × Power Steering Pump (OE reference 996 314 050 03)

Fits:
* M657 - for cars with power assisted steering
Porsche 986 Boxster 1997 - 2004
Porsche 996 Carrera 1997 - 2004
Left Hand Drive (LHD) Cars (like Europe)

*** We strongly recommend replacing the power steering pump at the same time as the steering rack. Swarf (metal particles) in the power steering system can circulate and cause damage to both components.

When ordered together, the steering rack and pump can be purchased as a discounted bundle, providing better long-term reliability and value.

If you choose to replace only the steering rack and, upon return of your exchange unit, we discover that the rack bar is scored or contaminated with swarf, this indicates that debris is present in the system. In such cases, we will advise replacing the pump as well — however, it will then be charged at the full retail price plus postage.

Please note: if we have advised that there is swarf in the system and you choose not to replace both components, any future warranty claims related to this issue will not be valid.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

STEERINGSET986996LHD
411091500322
99631405002
99631405003
99631402004
99631402005
99731402000
99634701111
99634701110
99634701107
99634701104
99634701105
99634701106

The product you are viewing cross references to these numbers
DISPLAYING 449 to 464 (of 2532 products)