OE Match

Gearbox mounting kit. 



Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965

This gearbox mount set includes the rear left and right mounts, positioned at an angle on the side of the gearbox, as well as the two front round rubber mounts. Even without visible damage the aging rubber in the bearing block can become porous, causing unwanted play in the transmission within its holder. 

Click 'Zoom in' for large parts diagram.
Diagram ref no 43 and 49

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

5192009KIT

The product you are viewing cross references to these numbers

Gasket kit rear silencer. 

Fits:
Porsche 911 - 1975 to 1989
For 2.7ltr / 3.0ltr / 3.2ltr engine

This kit consists of a flange gasket, three stainless steel screws and three nuts for sealing the exhaust silencer flange.
The seal is suitable for the Porsche 911 G models from 1975 to 1989 to connect the pre-silencer to the rear silencer.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911111191KIT

The product you are viewing cross references to these numbers

Lambda oxygen sensor engine kit - before and after catalytic converter.
Kit includes 4 x Lambda sensors

Fits:
Porsche 986 Boxster 2.7ltr - 2003 Onwards
Porsche 986 Boxster S 3.2ltr - 2003 Onwards

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98660622601KIT2

The product you are viewing cross references to these numbers

Chain cover rubber sealing plugs. SET OF 18
This set of 18 rubber sealing rings (thrust rings) is used in the timing-chain assembly of Porsche 911 (964) and 911 (993) models. Each seal is manufactured to the same dimensions, material quality, and performance standards as the original Porsche part, ensuring perfect OE fit and reliable sealing around the timing-chain cover studs and bolts.

Fits:
Porsche 964 - 1989 to 1994
Porsche 964 turbo 3.6ltr - 1991 to 1994
Porsche 993 - 1994 to 1997

Diagram ref no 17

• Includes: Set of 18 rubber sealing plugs – enough for one vehicle.
• Position: Located on the timing-chain cover / chain case, around stud or bolt interfaces.
• Function: Provides a secure oil-tight seal at the stud/bolt interface, preventing oil leaks and blocking moisture or dirt ingress into the chain case.

Over time, rubber seals can harden or deform from heat and oil exposure, leading to minor leaks or contamination in the chain-case area. Replacing all seals during engine service or overhaul ensures optimal sealing integrity and proper lubrication of timing components.

Recommended Replacement:
•  Whenever the timing-chain cover or chain-case is removed or serviced.
•  When oil seepage or residue is visible around chain-case bolts or studs.
•  During carburettor or gasket replacement, or any full engine rebuild.
•  When replacing timing components to ensure complete reassembly sealing.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96410514001

The product you are viewing cross references to these numbers

Valve spring engine set.
Complete engine valve spring set - inner and outer springs



Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994

Valve springs endure significant thermal stress, which can cause them to lose tension over time. A broken spring can lead to severe engine damage, therefore, it's crucial to inspect and replace the springs as needed during an engine overhaul. The intake and exhaust valves use identical springs, consisting of an inner and outer spring pair for each valve. Alongside these, we offer a comprehensive selection of engine repair components, including valve stem seals and valve guides.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPRINGKIT01

The product you are viewing cross references to these numbers

Camshaft and timing chain cover washer pack 8,4. 
Pack of 100 washers



Fits:
Porsche 911 - 1965 to 1989
Porsche 964 turbo - 1991 to 1993
Porsche 914-6 - 1970 to 1976

Washer used in numerous locations from
Cam covers
Timing chain covers
Throttle bodies

Click 'Zoom in' for large parts diagram.
Diagram ref no 28

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

WASHERKIT02

The product you are viewing cross references to these numbers

Oil pipe kit for hydraulic timing chain tensioners. 

Fits:
Porsche 911 SC - 1978 to 1982 (Cars with hydraulic chain tensioner upgrade)
Porsche 911 turbo 1975 to 1984 (Cars with hydraulic chain tensioner upgrade)
Porsche 911 - 1984 to 1989

Diagram ref no 8, 9, 10, 11, 14, 15, 24, 25, 26 and 27

Oil lines may seem like minor components, but if they become defective, they can lead to significant damage. These lines connect the engine, oil cooler, or timing chain tensioner, often functioning for years without issue. However, if a crack or break occurs, substantial amounts of oil can leak out—potentially draining the entire oil tank—and the affected component will no longer receive a reliable supply of engine oil.

To prevent such damage, it's recommended to replace aging oil hoses or lines before any issues arise. Full restorations generally involve replacing all oil lines to ensure reliability. Here, you can find high-quality replacement parts as described in the title.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

OILPIPEKIT02

The product you are viewing cross references to these numbers

Timing chain set camshafts for PORSCHE 996 3.4L Carrera 986 2.5L 2.7L 3.2L 

This timing chain kit includes the timing chains for the camshaft and intermediate shaft, as well as the slide and tension rails.

Due to the complex design with an intermediate shaft and two overhead camshafts, the water boxers of the modern Porsche 911 Carrera and Boxster have a variety of chains and slide rails. These vary depending on the displacement or model year, even within a series.

The chain guides were slightly changed between the 3.4L and 3.6L Carrera engines from 2001 to 2002. The engines of the 911 turbo and GT models, however, are based on the proven 911 technology from the previous models. The timing chains as well as slide rails and tensioning rails for the valve control are fundamentally different.

Fits: 

• Porsche Boxster 986 2.5L 1997-99
• Porsche Boxster 986 2.7L 1999-02
• Porsche Boxster S 986 3.2L 1999-02
• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

ENGINEKIT12

The product you are viewing cross references to these numbers

Brake sensors and shims package Porsche 997 FRONT & REAR SET
Complete set of replacement brake shims and wire sensors, 16 PARTS

Fits: 
Porsche 997 C2 

Porsche 997 C4

Porsche 987 S Boxster / Cayman 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEPADAC997.FR.OEM

The product you are viewing cross references to these numbers