OE Match

Inner door felt seal set.
This door sealing rail kit includes two felt-finish inner door seals - left side (91154240303) and right side (91154240403), designed for the Porsche 911 / 964 series (1986-1994). 
SET OF 2, includes: Left or Right side seals

Fits:
Porsche 911 1986 - 1989
Porsche 964 1989 - 1994

Diagram ref no. 25

The high-quality felt-lined D-profile rails mimic the original Porsche finish to ensure quiet operation, improved sealing and factory-correct appearance.

• Complete pair: both left (91154240303) & right (91154240403) inner door felt seals
• Accurate profile and materials matching original Porsche D-rail design
• Enhances cabin quietness by reducing wind noise and rattle at the door inner panel
• Ideal for restoration or when renewing worn door seals

Old door felt seals degrade, flatten or detach over time, allowing increased wind intrusion, rattles and reduced interior refinement. Installing this matched pair restores correct door seal contact, reduces noise and completes the interior restoration to factory spec.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911542403403

The product you are viewing cross references to these numbers

Cardan shaft rear transmission - Long Wheelbase. 

Fits:
Porsche 970.2 Panamera 4S Executive - 2014 to 2016

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97042103131

The product you are viewing cross references to these numbers

Shock absorber top mounting rear.



Fits:
Porsche 95B.1 Macan 2014 to 2018
Porsche 95B.2 Macan -  2019 to 2021

For cars with Option Codes
1BH - Suspension/dampers, standard 2 PASM 
1BK - Air suspension with levelling system and height adjustment (PASM)


Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B513353A

The product you are viewing cross references to these numbers

Sealing ring, high pressure fuel pump - 31x2



Fits:
Porsche 958.1 Macan 2.0ltr - 2014 to 2018
Porsche 958.2 Macan - 2019 to 2021
Porsche 957 Cayenne 3.6ltr - 2007 to 2010
Porsche 958 Cayenne 3.6ltr - 2017 to 2017
Porsche 958 Cayenne S Hybrid 3.0ltr - 2017 to 2017
Porsche 9YA Cayenne S 2.9ltr - 2018 to 2023
Porsche 970.1 Panamera S Hybrid - 2009 to 2013
Porsche 970.2 Panamera S E-Hybrid - 2014 to 2016
Porsche 971.1 Panamera 2.9ltr / 3.0ltr V6 - 2017 to 2020
Porsche 971.1 Panamera E-Hybrid - 2017 to 2020
Porsche 971.2 Panamera / 4 / 4S 2.9ltr V6 - 2021 to 2023
Porsche 971.2 Panamera 4 E-Hybrid - 2021 to 2023

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

WHT005184

The product you are viewing cross references to these numbers

Battery Ground Strap.



Fits:
Porsche 356 / 356A 1950-59
Porsche 356 B-T6 / 356C 1960-65 (Cars with 6 Volt Batteries)

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64461230102

The product you are viewing cross references to these numbers

Electric fan and window motor 5 pin relay



Fits:
Electric cooling fan
Porsche 928 - 1987 to 1991 (relay location number XVIII)
Porsche 944 - 1985 to 1991 (relay location G1)
Porsche 968 - 1992 to 1995 (relay location G1)

Electric window motor
Porsche 944 Cabriolet - 1989 to 1991
Porsche 968 Cabriolet - 1992 to 1995

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94461511900

The product you are viewing cross references to these numbers

Exhaust gas recirculation valve EGR. 



Fits:
Porsche 957 Cayenne Diesel 3.0ltr - 2007 to 2010

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95511105101

The product you are viewing cross references to these numbers

Exhaust gas recirculation valve EGR. 
The EGR valve is a recirculation control valve that regulates the flow of exhaust gases back into the intake on qualifying Porsche 958 4.2L diesel engines. It’s a critical emissions control and combustion-management component - controlling EGR flow to manage NOx emissions, combustion temperature, and overall engine efficiency. Fits left or right
Price is each, 2 required per car.

Fits:
Porsche 958 Cayenne S Diesel V8 4.2ltr 2010 - 2017

Diagram ref no 20

This EGR valve:

• Recirculates a controlled portion of exhaust gases into the intake to lower combustion temperature and reduce NOx emissions.
• Maintains proper valve flow and sealing to ensure consistent emissions control and engine performance.
• Provides reliable operation, with correct internal valve timing and robust valve sealing to prevent leaks or exhaust escape.
• Restores proper EGR function when the original valve fails, is stuck, or leaks - helping avoid emission faults, poor idling, or performance issues.

A failing EGR valve can cause poor combustion, increased emissions, and reduced engine efficiency, especially on diesel models that rely heavily on proper exhaust recirculation. As carbon builds up or the valve sticks, the engine may experience rough running, hesitation, smoke, or higher operating temperatures. Replacing a worn EGR valve restores correct exhaust-gas flow, maintains emission compliance, prevents exhaust leaks, and helps protect the engine from unnecessary stress or long-term damage.

Consider replacing the EGR valve if:
• There are error codes related to EGR failure or emissions fault.
• Engine shows rough idle, hesitation, or reduced performance under load.
• There’s excessive smoke or poor combustion performance, especially on a diesel engine.
• The original valve is faulty, leaking, stuck, or otherwise degraded due to age / carbon build-up.
• Performing an engine maintenance, overhaul, or emission-system service, especially if the EGR hasn’t been replaced before.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

958131501

The product you are viewing cross references to these numbers

Water temperature sensor. Porsche 928



Fits:
Porsche 928 S2 / 928 S4 - 1984 to 1991
Porsche 928 GTS - 1992 to 1995

Click 'Zoom in' for large parts diagram.
Diagram ref no 50

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92860612600

The product you are viewing cross references to these numbers

Fuel injection line - Cylinders 1, 2 and 3
Sold each - 3 required per car

Fits:

Porsche 911 2.7ltr / 3.0ltr - 1974 to 1980

Diagram ref no 50

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91111009313

The product you are viewing cross references to these numbers

Stabilizer bar bush, Rear.
Size: 22mm diameter
Sold each.

It’s fitted on the rear anti-roll (sway) bar to support and cushion the bar’s mounting points. The stabilizer bar helps reduce body roll (lean) during cornering by transferring forces between the left and right sides of the suspension. The bushing’s job is to hold the bar in place while allowing it to move slightly and absorb vibration.

Fits:
Porsche 924 1978 REAR AXLE
Porsche 964 Turbo (965) REAR AXLE

Diagram ref no 17.

Replacing worn or damaged sway bar bushings is crucial because:
•  Ride comfort & handling suffer when bushings are worn—they get sloppy, allowing excessive play in the bar mount, which can lead to clunks, noise, or decreased steering precision
•  Safety: A loose stabilizer bar means uneven handling, especially during sharp turns or emergency manoeuvres. Your car may feel “floaty” or unstable
•  Prevent further damage: Neglected worn bushings can allow metal-on-metal contact, damaging the stabilizer bar itself, mounting brackets, or adjacent chassis components.

Signs that the PCG411313E bushing may be failing include:
•  A clunking or knocking noise from the rear of the car over bumps or during turns.
•  Squeaking or creaking sounds from the rear when going over irregular surfaces
•  Noticeable body roll / lean during cornering (worse than it used to be
•  Uneven tyre wear due to altered suspension geometry
•   Visual inspection shows cracks, splitting, flat spots, or hardened rubber, or the bush is missing or loose.

If the stabilizer bar bushing fails and isn’t replaced, the bar can loosen and cause excessive movement, leading to clunks, knocks, and poor handling in corners. This not only reduces driving confidence and safety but can also overload other suspension parts, creating bigger problems and costly repairs over time.  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG411313E

The product you are viewing cross references to these numbers

Track rod rear suspension. 
Sold Each - Fits Left and Right Hand Side, 2 required per car



Fits:
Porsche 991.1 Carrera / Carrera S - 2012 to 2016
Porsche 991.1 Carrera 4 / Carrera 4S - 2012 to 2016
Porsche 991.2 Carrera / Carrera S - 2016 to 2019
Porsche 991.2 Carrera 4 / Carrera 4S - 2016 to 2019

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1501529A

The product you are viewing cross references to these numbers