do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
- Accessories
- Brakes
- Chassis / Bodywork
- Clothing & Gifts
- Electrical & Relays
- Engine Cooling
- Engine Electrical
- Engine Rebuild Parts
- Engine Tuning
- Exhausts
- Exterior Styling / Spoilers
- Gearbox / Transmission
- Heating / Air Conditioning
- Hydraulics
- Incar / Multimedia
- Interior & Accessories
- Lighting
- Mats & Carpets
- Motorsport and Off-Road
- Parts for Other Cars
- Pedal Cluster
- Rubber Seals
- Seats & Seat Belts
- Service Parts
- Special Offer Parts
- Steering Parts
- Suspension & Axle
- Suspension Upgrades
- Tyres
- Wheel Accessories
- Wheels
OE Match
OE Match for Porsche
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations
A Quick Look at OE Match
OE Match information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where OE Match is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Often chosen when owners want OE-equivalent quality with sensible running costs, especially for routine service and wear items.
- Typical reasons to replace include restoring reliability, addressing age-related wear, or refreshing multiple components during larger repair work.
- Common defects from incorrect application include noise, premature wear, leaks, or fitment quirks if the wrong variant is selected or fitted with old seals/hardware.
- Watch for symptoms such as unusual noises, early wear, or repeat failures after recent work, which can indicate mismatched parts or supporting items left worn.
- Always cross-check OEM part numbers, read model-year notes, and verify compatibility before ordering.
- For safety-critical components, confirm specification and fitment carefully and have installation checked by a competent technician.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, longer stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
Brake Pad Wear Sensors — Brake pad wear sensors are replaced when pads are renewed or when warning lights indicate a broken or worn sensor. Symptoms include brake wear warnings even with new pads, damaged sensor cables, or broken clips around the caliper area.
Engine Electrical — Engine electrical parts are changed when there are starting, charging, ignition, or sensor-related faults that affect drivability and reliability, such as intermittent no-start, misfires, rough idle, poor charging, warning lights or heat-soak failures.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected, often resolving hard starting, rough idle, poor fuel economy and warning lights caused by clogged filters or worn ignition components.
Service Kits — Service kits bundle key service components to simplify maintenance and set the car back to a known baseline, especially useful when catching up on overdue servicing or dealing with general sluggish running, inconsistent idle and reduced performance.
- For brake parts, confirm whether items are OE-equivalent replacements or performance upgrades and check if new fitting kits and sensors are required.
- On service items and kits, match the kit to your exact Porsche model, engine and year, and review what is included so you can add any extra “while you are there” parts.
Explore OE Match at Design911
View the current OE Match range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
Maintain proper cooling system performance with the Coolant Hose. This OE MATCH hose is designed to transfer engine coolant between key cooling system components, supporting efficient circulation and stable engine operating temperatures.
Fits:
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Diagram Ref No 29
What This Product Does:
- Transfers coolant between key engine cooling components
- Maintains continuous coolant circulation
- Helps dissipate engine heat through the radiator system
- Prevents overheating by supporting stable operating temperatures
- Contributes to overall cooling system efficiency
Symptoms Of Wear Or Failure:
- Coolant leaks under the vehicle or in the engine bay
- Low coolant warning light
- Frequent coolant top-offs
- Engine overheating or rising temperature gauge
- Sweet coolant smell from the engine compartment
- Steam from under the hood in severe cases
- Cracks, splits, or dry rot on the hose surface
- Bulging or swelling caused by internal weakening
- Soft, spongy, or brittle hose texture
- Coolant residue or dampness around hose fittings and clamps
- Replacing a worn coolant hose is critical to maintaining proper coolant circulation and preventing engine overheating. Over time, constant heat, pressure, and coolant exposure can cause the hose to weaken, crack, or leak.
- If the hose fails, coolant can escape quickly, leading to overheating and potentially severe engine damage such as warped components or head gasket failure. Even small leaks can gradually reduce cooling efficiency and increase strain on the system.
- Installing a new coolant hose restores reliable coolant flow, prevents leaks, and helps protect the engine for long-term performance and durability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95810607300
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
Ensure reliable engine temperature control with the Cooling Water Hose. This OE MATCH hose is designed to carry coolant through the engine’s cooling system, supporting efficient heat transfer and stable operating temperatures.
Fits:
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
Diagram Ref No 15
What This Product Does:
- Carries coolant between key cooling system components
- Supports proper coolant circulation and heat transfer
- Helps maintain stable engine operating temperature
- Prevents overheating by ensuring continuous coolant flow
- Contributes to overall cooling system efficiency
Symptoms Of Wear Or Failure:
- Coolant leaks under the vehicle or in the engine bay
- Low coolant warning light
- Frequent coolant top-offs
- Engine overheating or rising temperature gauge
- Sweet coolant smell from the engine compartment
- Steam from under the hood in severe cases
- Cracks, splits, or dry rot on the hose surface
- Swelling or bulging from internal weakening
- Soft, spongy, or brittle hose texture
- Coolant residue or dampness around hose clamps or fittings
- Replacing a worn cooling water hose is essential to maintaining proper coolant circulation and engine temperature control. Over time, heat, pressure, and coolant exposure can cause the hose to crack, weaken, or leak.
- If the hose fails, coolant loss can occur rapidly, leading to engine overheating and potential damage such as warped components or head gasket failure. Even minor leaks can reduce cooling efficiency and increase strain on the system.
- Installing a new hose helps prevent leaks, restore reliable coolant flow, and protect the engine from costly overheating-related repairs.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95812108110
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
Shop Securely
12 Month Warranty
Worldwide Delivery
Porsche High Pressure Fuel Pump Kit - Complete Direct Injection Fuel System Repair Kit
This high pressure fuel pump kit is designed for Porsche V6
direct injection engines and includes:
1 x High
pressure fuel pump (HPFP)
1 x Fuel
pump cam follower
2 x Pump mounting bolts
Fits:
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
This kit provides a complete solution for restoring proper high-pressure fuel delivery.
What the High Pressure Fuel Pump Does
Modern Porsche V6 engines use direct fuel injection, which requires significantly higher fuel pressure than traditional injection systems. The high pressure fuel pump is mechanically driven by the camshaft and increases fuel pressure before delivering it to the fuel rail and injectors.
The fuel pump cam follower sits between the camshaft lobe and the pump itself. It transfers camshaft motion to the pump piston while reducing friction and wear.
Together, these components:
- Maintain correct fuel pressure under load
- Ensure precise fuel atomisation
- Support smooth acceleration
- Improve fuel efficiency
- Enable strong performance across the rev range
Without a properly functioning high pressure fuel pump and cam follower, engine performance and reliability are compromised.
Why High Pressure Fuel Pumps and Cam Followers Fail
High pressure fuel pumps operate under extreme pressure and
continuous mechanical stress. Over time, failure can occur due to:
- Internal pump wear
- Excessive cam follower wear
- Poor lubrication or oil contamination
- High mileage fatigue
- Heat cycling and mechanical load
The cam follower is a known wear component, as it constantly rides against the camshaft. If it wears excessively, it can reduce pump stroke and fuel pressure output.
Common symptoms of failure include:
- Long cranking or hard starting
- Loss of power under acceleration
- Engine hesitation
- Check engine light
- Fuel pressure fault codes
- Limp mode activation
Ignoring these symptoms can lead to lean running conditions and potential engine damage.
Why You May Need This Complete Fuel Pump Kit
Replacing only the high pressure fuel pump without inspecting or replacing the cam follower can lead to repeat failure. This complete kit ensures all wear components are renewed at the same time.
This kit is recommended for:
- Vehicles displaying fuel pressure fault codes
- Rough running or hesitation under load
- High mileage preventative maintenance
- Engine rebuild or camshaft service
- Diagnosing direct injection fuel pressure issues
Including new mounting bolts ensures proper torque specification and secure installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94611031562
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Maintain proper cooling system ventilation and performance with the Breather Line for Radiator, RIGHT. This OE MATCH breather line is designed to vent trapped air and vapor from the right-side radiator circuit, helping ensure efficient coolant circulation and stable engine temperatures.
Fits:
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
Diagram Ref No 15
What This Product Does:
- Releases trapped air from the right-side radiator system
- Helps prevent air pockets that can restrict coolant flow
- Supports stable cooling system pressure
- Maintains consistent engine temperature control
- Reduces the risk of overheating
Symptoms Of Wear Or Failure:
- Coolant leaks near the radiator or along the breather line
- Low coolant warning light
- Frequent coolant top-offs
- Sweet coolant smell from the front of the vehicle
- Coolant residue or staining around fittings or connections
- Cracked, brittle, or weakened line material
- Air trapped in the cooling system, causing gurgling sounds
- Fluctuating engine temperature or inconsistent gauge readings
- Overheating, especially after coolant service or refilling
- Steam from under the hood in severe cases
- Replacing a worn radiator breather line is important because it helps the cooling system vent trapped air and maintain proper pressure. Over time, heat and coolant exposure can cause the line to become brittle, cracked, or leak.
- If the breather line fails, air pockets may form in the radiator circuit, reducing coolant circulation and cooling efficiency. This can lead to coolant loss, unstable engine temperatures, and an increased risk of overheating.
- Installing a new breather line helps prevent leaks, supports proper system bleeding, and ensures reliable engine cooling performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992121466
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
Shop Securely
12 Month Warranty
Worldwide Delivery
Ensure proper cooling system operation with the Radiator Coolant Vent Line, LEFT. This OE MATCH vent line is designed to help remove trapped air from the radiator cooling circuit, supporting consistent coolant circulation and stable engine temperature control.
Fits:
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Diagram Ref No 30
What This Product Does:
- Vents air from the radiator cooling system
- Prevents air pockets that can restrict coolant flow
- Supports consistent coolant circulation
- Helps maintain stable engine operating temperature
- Reduces the risk of overheating
Symptoms Of Wear Or Failure:
- Coolant leaks near the radiator or along the vent line
- Low coolant warning light or frequent coolant top-offs
- Sweet coolant smell from the front of the vehicle
- Coolant residue or staining around fittings or connections
- Cracked, brittle, or leaking vent line material
- Air trapped in the cooling system, causing gurgling sounds
- Fluctuating engine temperature or inconsistent gauge readings
- Overheating, especially after coolant service or refilling
- Steam from under the hood in severe cases
- The radiator coolant vent line plays an important role in allowing trapped air to escape from the cooling system. If the line becomes cracked, brittle, or blocked, air pockets can form in the radiator circuit, reducing coolant flow and cooling efficiency.
- Failure to replace a damaged vent line may lead to coolant leaks, unstable system pressure, fluctuating engine temperatures, and an increased risk of overheating. Even small leaks can gradually reduce coolant levels and compromise performance.
- Replacing the vent line helps ensure proper system bleeding, maintains consistent coolant circulation, and protects the engine from heat-related damage.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99110676502
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Ensure proper transmission cooling and reliable performance with the PDK Gearbox Coolant Hose, Feed. This OE MATCH feed hose is designed to deliver coolant to the PDK gearbox cooling circuit, helping regulate transmission temperatures during everyday driving and high-performance conditions.
Fits:
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Diagram Ref No 6
What This Product Does:
- Feeds coolant into the PDK gearbox cooling circuit
- Helps dissipate heat generated by the transmission
- Maintains stable gearbox operating temperatures
- Protects internal transmission components from heat-related wear
- Supports smooth shifting and consistent performance
Symptoms Of Wear Or Failure:
- Coolant leaks near the transmission or under the vehicle
- Low coolant warning light
- Frequent coolant top-offs
- Transmission temperature warning message
- Gearbox running hotter than normal
- Transmission performance issues or limp mode activation
- Coolant residue or staining around hose fittings
- Cracks, brittleness, swelling, or soft spots in the hose material
- Steam from beneath the vehicle in severe cases
- Replacing a worn PDK gearbox coolant feed hose is important because it ensures coolant is properly delivered to the transmission cooling system. Over time, heat and pressure can cause the hose to weaken, crack, or leak, reducing coolant flow to the gearbox cooler.
- If the hose fails, the transmission may overheat, triggering warning messages, reduced performance, or limp mode. Continued overheating can lead to premature wear and costly internal gearbox damage.
- Installing a new feed hose helps prevent coolant loss, restores proper cooling circulation, and protects the PDK transmission for long-term reliability and performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9G230706300
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Shop Securely
12 Month Warranty
Worldwide Delivery
Maintain optimal transmission cooling and long-term performance with the PDK Gearbox Coolant Hose, Return. This OE MATCH return hose is engineered to carry coolant away from the PDK gearbox cooling circuit, ensuring continuous circulation and effective heat management.
Fits:
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Diagram Ref No 8
What This Product Does:
- Returns coolant from the PDK gearbox cooling circuit
- Maintains continuous coolant flow through the transmission cooler
- Helps regulate gearbox operating temperature
- Protects internal transmission components from excessive heat
- Supports smooth shifting and overall transmission performance
Symptoms Of Wear Or Failure:
- Coolant leaks near the transmission or under the vehicle
- Low coolant warning light
- Frequent coolant top-offs
- Transmission temperature warning message
- Gearbox running hotter than normal
- Transmission entering limp mode due to overheating
- Coolant residue or staining around hose connections
- Cracked, brittle, swollen, or soft hose material
- Steam from beneath the vehicle in severe cases
- Replacing a worn PDK gearbox coolant return hose is important because it ensures coolant can properly circulate through the transmission cooling system. Over time, heat and pressure can weaken the hose, leading to cracks, leaks, or restricted coolant flow.
- If the hose fails, coolant loss and reduced circulation can cause the PDK transmission to overheat. This may lead to reduced performance, warning messages, limp mode activation, or internal transmission damage.
- Installing a new return hose helps prevent leaks, maintain stable gearbox temperatures, and protect the PDK system for long-term reliability and smooth operation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9G230707801
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Shop Securely
12 Month Warranty
Worldwide Delivery
Complete Engine Camshaft Adjuster and Bolt Kit - Variable Valve Timing Repair Solution
This camshaft adjuster and bolt kit provides a complete solution for restoring correct camshaft timing operation on Porsche 958 Cayenne 4.8 litre V8 and 970 Panamera 4.8ltr V8 and 3.6ltr V6 engines.
Fits:
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
The kit includes:
2 x Camshaft
adjuster unit
2 x Securing bolt (single-use torque fastener)
Designed to meet OEM specifications, this kit ensures precise valve timing control and reliable engine performance.
What the Camshaft Adjuster Does
The camshaft adjuster is a key component of Porsche’s VarioCam variable valve timing system. It allows the engine control unit to adjust camshaft timing dynamically depending on engine speed, throttle input and load conditions.
By advancing or retarding valve timing, the camshaft
adjuster helps to:
- Improve low-end torque
- Enhance high-RPM power delivery
- Optimise fuel efficiency
- Reduce exhaust emissions
- Maintain smooth engine operation
The securing bolt clamps the adjuster firmly to the camshaft, ensuring accurate alignment and stable operation under high engine loads.
Why Camshaft Adjusters and Bolts Fail
Camshaft adjusters operate under high oil pressure and
constant rotational stress. Over time, they may fail due to:
- Internal wear of adjustment mechanisms
- Oil contamination or sludge buildup
- Loss of hydraulic pressure control
- High mileage wear Aggressive driving conditions
The securing bolts are often torque-to-yield fasteners designed for single use. Reusing old bolts can lead to insufficient clamping force, improper seating or loosening under load.
Common symptoms of failure include:
- Check engine light illumination
- Camshaft position or timing correlation fault codes
- Rough idle or hesitation
- Loss of power
- Rattling noise from the timing area
- Reduced fuel efficiency
In severe cases, incorrect cam timing can cause further engine damage if not addressed promptly.
Why You May Need This Camshaft Adjuster Kit
If your Porsche 958 Cayenne 4.8 V8 or 970 Panamera 4.8 V8 or 3.6 V6 is displaying camshaft timing faults, replacing both the adjuster and the securing bolt ensures a complete and reliable repair.
This kit is essential during:
- VarioCam repairs
- Timing chain service
- Cylinder head work
- Engine rebuilds
- Camshaft replacement
- Diagnosis of camshaft timing deviation codes
Installing a new adjuster together with a new bolt guarantees proper torque specification and long-term timing stability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810505123KIT1
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
High-quality OE Match replacement Additional Middle Water Radiator is a cooling core designed for the centre position in the front cooling system of the Porsche 992 (911). It supplements the main side radiators to increase overall cooling capacity, helping maintain optimal engine operating temperatures under demanding driving conditions.
Fits:
for vehicles with additional coolant radiator
Porsche 992.1 Carrera 2019 - 2024
Porsche 992.2 Carrera 2024 >>
Porsche 992 Turbo 2020 >> (PR:8Z6, 8Z8)
Diagram ref no 1
Modern Porsche 992 models use a multi-radiator cooling layout, with left, right, and additional centre radiators working together to manage thermal loads from turbocharged engines. The additional middle radiator increases total heat rejection capacity, particularly during high-speed driving, spirited use, or hot ambient conditions.
Designed as a direct-fit replacement, it installs into the factory centre radiator position using existing mounts and coolant lines without modification.
The additional middle radiator enhances the vehicle’s cooling system by:
• Increasing total coolant heat dissipation
• Supporting turbocharged engine thermal management
• Reducing heat-soak during aggressive driving
• Maintaining stable operating temperatures
• Helping preserve engine efficiency and longevity
Function
• Acts as supplementary heat exchanger in the centre cooling circuit
• Transfers engine heat from coolant to ambient airflow
• Supports consistent turbo and engine performance
• Works in conjunction with side radiators and cooling fans
A failing centre radiator can reduce overall cooling efficiency, causing higher engine temperatures, reduced performance under load, and increased fan operation. Left unchecked, poor heat management can place unnecessary thermal stress on critical engine components. Replacing a damaged or weakened radiator with a quality OE Match unit restores proper cooling performance and helps protect your Porsche engine from overheating and premature wear.
Replace the radiator if you notice coolant leaks, visible core damage or bent fins, overheating during heavy driving, or after front-end impact. It is also recommended during a cooling system overhaul or performance upgrade.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992121253C
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
- Porsche 992.2 Turbo 3.6L 2024>>
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
Free delivery
Porsche Camshaft Adjuster and Bolt Kit - Variable Valve Timing Repair Solution
This camshaft adjuster and bolt kit provides a complete solution for restoring correct camshaft timing operation on Porsche 958 Cayenne 4.8 litre V8 and 970 Panamera 4.8ltr V8 and 3.6ltr V6 engines.
Fits:
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
The kit includes:
1 x Camshaft
adjuster unit
1 x Securing bolt (single-use torque fastener)
Designed to meet OEM specifications, this kit ensures precise valve timing control and reliable engine performance.
What the Camshaft Adjuster Does
The camshaft adjuster is a key component of Porsche’s VarioCam variable valve timing system. It allows the engine control unit to adjust camshaft timing dynamically depending on engine speed, throttle input and load conditions.
By advancing or retarding valve timing, the camshaft
adjuster helps to:
- Improve low-end torque
- Enhance high-RPM power delivery
- Optimise fuel efficiency
- Reduce exhaust emissions
- Maintain smooth engine operation
The securing bolt clamps the adjuster firmly to the camshaft, ensuring accurate alignment and stable operation under high engine loads.
Why Camshaft Adjusters and Bolts Fail
Camshaft adjusters operate under high oil pressure and
constant rotational stress. Over time, they may fail due to:
- Internal wear of adjustment mechanisms
- Oil contamination or sludge buildup
- Loss of hydraulic pressure control
- High mileage wear Aggressive driving conditions
The securing bolts are often torque-to-yield fasteners designed for single use. Reusing old bolts can lead to insufficient clamping force, improper seating or loosening under load.
Common symptoms of failure include:
- Check engine light illumination
- Camshaft position or timing correlation fault codes
- Rough idle or hesitation
- Loss of power
- Rattling noise from the timing area
- Reduced fuel efficiency
In severe cases, incorrect cam timing can cause further engine damage if not addressed promptly.
Why You May Need This Camshaft Adjuster Kit
If your Porsche 958 Cayenne 4.8 V8 or 970 Panamera 4.8 V8 or 3.6 V6 is displaying camshaft timing faults, replacing both the adjuster and the securing bolt ensures a complete and reliable repair.
This kit is essential during:
- VarioCam repairs
- Timing chain service
- Cylinder head work
- Engine rebuilds
- Camshaft replacement
- Diagnosis of camshaft timing deviation codes
Installing a new adjuster together with a new bolt guarantees proper torque specification and long-term timing stability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810505123KIT
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
Ensure proper transmission cooling and long-term gearbox performance with the PDK Gearbox Coolant Hose, Return. This OE MATCH return hose is designed to carry coolant back from the PDK gearbox cooling circuit, helping maintain consistent coolant circulation and stable operating temperatures.
Fits:
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Diagram Ref No 9
What This Product Does:
- Returns coolant from the PDK gearbox cooling system
- Maintains continuous coolant circulation through the transmission cooler
- Helps remove excess heat from the PDK gearbox
- Supports stable transmission temperatures and smooth performance
- Helps prevent overheating and heat-related transmission wear
Symptoms Of Wear Or Failure:
- Coolant leaks near the transmission or under the vehicle
- Low coolant warning light
- Frequent need to top off coolant
- Transmission temperature warning message
- Gearbox running hotter than normal
- Transmission entering limp mode due to overheating
- Coolant residue or dampness around hose fittings
- Cracked, brittle, swollen, or soft hose material
- Steam from beneath the vehicle in severe cases
- The PDK gearbox coolant return hose is essential for maintaining proper coolant circulation through the transmission cooling system. If this hose becomes cracked, weakened, or begins to leak, coolant flow may be reduced and transmission temperatures can rise quickly.
- Failure to replace a worn hose can lead to coolant loss, overheating, reduced transmission performance, and potential internal gearbox damage. In severe cases, the transmission may enter protective limp mode to prevent further harm.
- Replacing the return hose restores reliable coolant circulation, supports stable gearbox temperatures, and helps protect the PDK transmission for long-term performance and durability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9G230707904
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Shop Securely
12 Month Warranty
Worldwide Delivery
Maintain proper transmission cooling and performance with the PDK Gearbox Coolant Hose, Feed. This OE MATCH hose is designed to deliver coolant to the PDK gearbox cooling circuit, helping regulate transmission temperatures under normal driving and high-performance conditions.
Fits:
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Diagram Ref No 7
What This Product Does:
- Feeds coolant into the PDK gearbox cooling circuit
- Helps dissipate heat generated by the transmission
- Maintains stable gearbox operating temperatures
- Protects internal transmission components from heat-related wear
- Supports smooth shifting and overall transmission performance
Symptoms Of Wear Or Failure:
- Coolant leaks near the transmission or under the vehicle
- Low coolant warning light
- Frequent coolant top-offs
- Transmission temperature warning message
- Gearbox running hotter than normal
- Reduced transmission performance or protective limp mode
- Coolant residue or staining around hose fittings
- Cracked, brittle, or swollen hose material
- Steam from under the vehicle in severe cases
- The PDK gearbox coolant feed hose is essential for delivering coolant to the transmission cooling system. If this hose becomes worn, cracked, or begins to leak, coolant flow to the gearbox cooler can be reduced or lost entirely.
- Failure to replace a damaged hose may result in elevated transmission temperatures, reduced performance, or the transmission entering protective (limp) mode. Prolonged overheating can lead to premature wear of internal components and costly repairs.
- Replacing the hose ensures consistent coolant supply to the PDK system, maintains stable operating temperatures, and helps protect the transmission for long-term reliability and performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9G230706500
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Shop Securely
12 Month Warranty
Worldwide Delivery
SET OF 2
Fits:
Porsche 911 Carrera, 3.2, 8/1983 - 7/1986
Porsche Carrera Sport, 3.2, 8/1983 - 7/1986
Porsche 911S (mech. inj.), 2.4, 8/1971 - 7/1973
Porsche 911SC/911 Carrera, 2.7-3.0, 8/1975 - 7/1983
Porsche 911SC/Turbo (930T), 3.3, 8/1978 - 7/1986
Porsche 911T/E/S (not mech. inj.), 2.0-2.4, 1/1963 - 7/1973
Porsche 911/911S/911 Carrera, 2.7, 8/1973 - 7/1975
Porsche 912 Export Model USA
Porsche 912 Model Europe
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90121100100B
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
Front bonnet dampers set of 2 by OE Match for Porsche 991 (911), 981 Boxster/Cayman and 718 (982) Boxster/Cayman models, supplied as a pair for the front lid.
What This Product Does These front lid gas struts support and control the movement of the bonnet so it can be opened and closed smoothly and remain held in the raised position.
Functions
- Support the weight of the front bonnet during opening
- Control the bonnet lifting and closing movement
- Help keep the lid securely raised when open
- Assist in restoring factory-style bonnet operation after wear
Symptoms of Fault
- Bonnet slowly drops or will not stay open, especially in colder weather
- Jerky or uneven bonnet movement
- Visible oil misting or leakage on the damper body
- Knocking or clicking noises as the bonnet is raised or lowered
Why Replacement MattersFront bonnet dampers lose gas pressure over time, which can make the lid feel heavier and prone to dropping. Renewing them as a pair helps restore smooth, predictable bonnet operation and reduces the risk of relying on worn or inconsistent supports.
Fits
- Porsche 991 (911) MK1 2012–2016, including Carrera, Carrera S, Carrera 4, Carrera 4S, GTS, Turbo, Turbo S, GT3, GT3 RS and 911 R variants listed in the detailed fitment notes
- Porsche 981 Boxster 2012–2016, including 2.7 and S/GTS 3.4L models
- Porsche 981C Cayman 2013–2016, including S, GTS and GT4 3.8L
- Porsche 718 (982) Boxster 2017–onwards, 2.0 and S 2.5L (manual and PDK)
- Porsche 718 (982) Cayman 2017–onwards, 2.0 and S 2.5L (manual and PDK)
FAQs
- Are these supplied as a pair? Yes, this listing is for a set of two front bonnet dampers.
- Do they fit cars with standard bodywork? They are intended for vehicles within the listed model and year coverage; check for non-standard front-end modifications before ordering.
- Should both dampers be replaced together? It is generally recommended to renew bonnet struts in pairs to keep lift and support consistent side to side.
- Is special tooling required to install them? Fitting usually involves releasing the existing clip fixings and refitting the new units; many owners have this work carried out by a competent technician.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99151155100
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
often called intercoolers. This OE Match set Charge Air Coolers is a complete left and right intercooler replacement package for the Porsche 9YA Cayenne 3.0L turbocharged models (2018>>). These intercoolers reduce the temperature of compressed air from the turbochargers before it enters the combustion chambers. Cooler air is denser, allowing improved oxygen content, more efficient combustion, and stable power delivery.
SET OF 2
Fits:
Porsche 9YA Cayenne V6 3.0L 2018 - 2024 (PR:T9I)
Porsche 9YA.2 Cayenne V6 3.0L 2023 >>
Diagram ref no 1 (Left) and 2 (Right)
This OE Match SET OF 2 includes both:
• Left Charge Air Cooler – OE ref no PAB145803A
• Right Charge Air Cooler – OE ref no PAB145804A
Each unit is constructed from high-efficiency aluminium cores with precision-formed cooling fins and durable end tanks engineered to withstand boost pressure and thermal cycling. Replacing both sides together ensures balanced airflow, consistent intake temperatures, and optimal turbocharger performance.
Over time, intercoolers can suffer from:
• Heat-soak efficiency loss
• Internal contamination (oil mist from turbo system)
• External fin damage from debris
• Boost leaks from cracked seams or worn connections
Installing this OE Match pair restores full cooling capacity and ensures consistent intake air temperature across both sides of the engine.
Direct-fit design allows straightforward installation using factory mounting points and original boost hoses.
The charge air cooler cools the turbocharged intake air before it enters the engine’s combustion chambers. By reducing intake air temperature:
• Air becomes denser, carrying more oxygen
• Combustion becomes more efficient
• Power and torque output is more consistent
• Risk of detonation (engine knock) is reduced
• Turbocharger spool-up can become more responsive
A failing or inefficient charge air cooler can cause higher intake air temperatures, reduced power output, inconsistent boost delivery, increased engine knock risk, and poorer fuel economy. Damaged or leaking intercoolers also encourage intake pressure loss, reducing performance and drivability. Installing an OE Match charge air cooler restores optimized charge-air cooling, helping the engine produce power consistently, run cooler, and meet emissions expectations.
When to replace. Replace the charge air cooler when you observe any of the following:
• Noticeable power loss or inconsistent boost pressure
• Heat-soak symptoms under sustained load or hot weather
• Visible external damage, bent core tubes, or leaking seams
• Oily residue inside or outside the cooler (sign of turbocharger oil contamination)
• During turbocharger service, intake system overhaul, or front-end repair.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB14580XA
The product you are viewing cross references to these numbers
- Porsche 9YA Cayenne V6 3.0L Petrol (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe V6 3.0L Petrol (340Hp) 2019-23
- Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L (340Hp) 2020-23
- Porsche 9YA.2 Cayenne V6 3.0L Petrol (353Hp) 2023>>
- Porsche 9YA.2 Cayenne Coupe V6 3.0L (353Hp) 2023>>
- Porsche 9YA.2 Cayenne E-Hybrid V6 3.0L (470Hp) 2023>>
- Porsche 9YA.2 Cayenne E-Hybrid Coupe V6 3.0L (470Hp) 2023>>
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
Handbrake Shoe and Hardware Kit - Complete Parking Brake Replacement Set
This handbrake shoe and hardware kit provides everything required to restore your vehicle’s parking brake system. The kit includes:
4 handbrake shoes Complete fitting hardware kit (springs, retaining components and installation hardware)Designed for reliable performance and precise fitment, this
complete kit ensures safe and secure handbrake operation.
Fits:
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
What Handbrake Shoes Do
Handbrake shoes, also known as parking brake shoes, are a critical part of the rear braking system. Unlike the main hydraulic braking system, the handbrake operates mechanically. When engaged, the handbrake cable pulls the shoes outward against the internal drum surface inside the rear brake disc or drum assembly.
Their primary functions are to:
- Hold the vehicle stationary when parked
- Prevent vehicle movement on inclines
- Provide emergency braking support if required
- Maintain safety during MOT or vehicle inspections
A properly functioning parking brake system is essential for both safety and legal compliance.
Why Handbrake Shoes Fail
Over time, handbrake shoes and their associated hardware
wear due to:
- Friction from repeated engagement
- Corrosion from moisture and road salt
- Heat build-up from incorrect adjustment
- Seized or weakened return springs
- Worn friction material
Common signs of worn or failing handbrake shoes include:
- Excessive handbrake travel
- Weak parking hold on hills
- Grinding or scraping noises from rear brakes
- MOT failure due to insufficient parking brake efficiency
- Uneven braking performance
Hardware components such as springs and retaining pins can also fatigue or corrode, leading to improper shoe alignment and reduced braking effectiveness.
Why You May Need a Complete Handbrake Shoe Kit
Replacing only the friction shoes without renewing the
hardware can result in uneven tension, poor fitment or premature wear.
Installing a full handbrake shoe and hardware kit ensures:
- Correct shoe positioning
- Proper spring tension
- Even braking force
- Reliable long-term performance
- Reduced risk of future brake noise or failure
This kit is ideal for:
Vehicles failing MOT parking brake tests Cars with high rear brake wear Brake disc or rear hub replacement jobs Preventative maintenance on high-mileage vehicles Restoring full handbrake holding powerRelated reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9Y0698533AA
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed