Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Part Categories +
- Accessories
- Brakes
- Chassis / Bodywork
- Clothing & Gifts
- Electrical & Relays
- Engine Cooling
- Engine Electrical
- Engine Rebuild Parts
- Engine Tuning
- Exhausts
- Exterior Styling / Spoilers
- Gearbox / Transmission
- Heating / Air Conditioning
- Hydraulics
- Incar / Multimedia
- Interior & Accessories
- Lighting
- Mats & Carpets
- Motorsport and Off-Road
- Parts for Other Cars
- Pedal Cluster
- Rubber Seals
- Seats & Seat Belts
- Service Parts
- Special Offer Parts
- Steering Parts
- Suspension & Axle
- Suspension Upgrades
- Tyres
- Wheel Accessories
- Wheels
OE Match
About OE Match
OE Match for Porsche
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations
A Quick Look at OE Match
OE Match information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where OE Match is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Often chosen when owners want OE-equivalent quality with sensible running costs, especially for routine service and wear items.
- Typical reasons to replace include restoring reliability, addressing age-related wear, or refreshing multiple components during larger repair work.
- Common defects from incorrect application include noise, premature wear, leaks, or fitment quirks if the wrong variant is selected or fitted with old seals/hardware.
- Watch for symptoms such as unusual noises, early wear, or repeat failures after recent work, which can indicate mismatched parts or supporting items left worn.
- Always cross-check OEM part numbers, read model-year notes, and verify compatibility before ordering.
- For safety-critical components, confirm specification and fitment carefully and have installation checked by a competent technician.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, longer stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
Brake Pad Wear Sensors — Brake pad wear sensors are replaced when pads are renewed or when warning lights indicate a broken or worn sensor. Symptoms include brake wear warnings even with new pads, damaged sensor cables, or broken clips around the caliper area.
Engine Electrical — Engine electrical parts are changed when there are starting, charging, ignition, or sensor-related faults that affect drivability and reliability, such as intermittent no-start, misfires, rough idle, poor charging, warning lights or heat-soak failures.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected, often resolving hard starting, rough idle, poor fuel economy and warning lights caused by clogged filters or worn ignition components.
Service Kits — Service kits bundle key service components to simplify maintenance and set the car back to a known baseline, especially useful when catching up on overdue servicing or dealing with general sluggish running, inconsistent idle and reduced performance.
- For brake parts, confirm whether items are OE-equivalent replacements or performance upgrades and check if new fitting kits and sensors are required.
- On service items and kits, match the kit to your exact Porsche model, engine and year, and review what is included so you can add any extra “while you are there” parts.
Explore OE Match at Design911
View the current OE Match range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
98151255106/1KIT
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98151255106
The product you are viewing cross references to these numbers
Product Information
Rear tailgate damper set of 2 for Porsche Cayman 981 and 718 (982), suitable for selected Cayman 987C/981C (2005–2016) and 718C (982C) 2017-on models.
What This Product Does These rear lid gas struts support the Cayman tailgate, controlling its lifting and closing motion so the lid can be opened and held in position during everyday use or access to the luggage area.
Functions
- Support the rear tailgate when open
- Control the lifting and closing speed of the lid
- Help prevent the lid from dropping unexpectedly
- Assist with smooth, consistent tailgate operation
Symptoms of Fault
- Rear lid feels heavy or difficult to lift
- Tailgate drops or will not stay fully open
- Visible oil mist or leakage on the damper shaft
- Creaking or knocking noises when opening or closing the lid
Why Replacement Matters
Worn rear lid dampers can allow the Cayman tailgate to drop or close unpredictably and may make the lid awkward to raise. Replacing tired dampers restores controlled movement of the rear lid, supports routine access to the luggage area, and helps maintain correct operation of the tailgate assembly.
Fits
- Porsche Cayman 987C / 981C (2005–2016)
- Porsche Cayman 2.7L 981 2013–16
- Porsche Cayman S / GTS 3.4L 981 2013–16
- Porsche Cayman GT4 3.8L 2015–16
- Porsche Cayman 718C (982C) 2017>>
- Porsche 718 Cayman 2.0L Manual (300 Bhp)
- Porsche 718 Cayman 2.0L PDK (300 Bhp)
- Porsche 718 Cayman S 2.5L Manual (350 Bhp)
- Porsche 718 Cayman S 2.5L PDK (350 Bhp)
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98151255106
98151255106
580307
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Rear Tailgate Damper. Porsche 981 Cayman / 718 (982) Cayman (98151255106/1)
Vehicle Group
Vehicle Group
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
Price: €46.80
In Stock - 24 Hour Dispatch
PAB14580
Product Information
Charge air coolers, often called intercoolers, are heat exchangers that cool the compressed intake air from the turbocharger before it enters the engine’s intake manifold. Turbos heat incoming air during compression; cooling that air increases density and oxygen content, which improves combustion efficiency, power output and reduces the risk of detonation. These coolers also help maintain consistent performance under load by managing intake temperatures.
Fits:
Porsche 9YA Cayenne V6 3.0L 2018 - 2024 (PR:T9I)
Porsche 9YA.2 Cayenne V6 3.0L 2023 >>
Diagram ref no 1 (Left) or 2 (Right)
These coolers are specified for Porsche Cayenne (9YA) models equipped with the 3.0 L turbocharged engine from approximately 2019 onward. They are positioned left and right in the charge-air circuit and are sold individually.
Applications
• Turbo system service: Replace damaged, cracked, or leaking charge air coolers due to wear or debris impact.
• Performance restoration: Restore intake charge cooling efficiency after boost system repairs.
• Diagnostics repair: Address symptoms such as reduced power, increased intake temps, or boost leaks
The charge air cooler cools the turbocharged intake air before it enters the engine’s combustion chambers. By reducing intake air temperature:
• Air becomes denser, carrying more oxygen
• Combustion becomes more efficient
• Power and torque output is more consistent
• Risk of detonation (engine knock) is reduced
• Turbocharger spool-up can become more responsive
A failing or inefficient charge air cooler can cause higher intake air temperatures, reduced power output, inconsistent boost delivery, increased engine knock risk, and poorer fuel economy. Damaged or leaking intercoolers also encourage intake pressure loss, reducing performance and drivability. Installing an OE Match charge air cooler restores optimized charge-air cooling, helping the engine produce power consistently, run cooler, and meet emissions expectations.
When to replace. Replace the charge air cooler when you observe any of the following:
• Noticeable power loss or inconsistent boost pressure
• Heat-soak symptoms under sustained load or hot weather
• Visible external damage, bent core tubes, or leaking seams
• Oily residue inside or outside the cooler (sign of turbocharger oil contamination)
• During turbocharger service, intake system overhaul, or front-end repair.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB14580
The product you are viewing cross references to these numbers
Product Information
Charge air cooler. Charge air coolers, often called intercoolers, are heat exchangers that cool the compressed intake air from the turbocharger before it enters the engine’s intake manifold. Turbos heat incoming air during compression; cooling that air increases density and oxygen content, which improves combustion efficiency, power output and reduces the risk of detonation. These coolers also help maintain consistent performance under load by managing intake temperatures.
Fits:
Porsche 9YA Cayenne V6 3.0L 2018 - 2024 (PR:T9I)
Porsche 9YA.2 Cayenne V6 3.0L 2023 >>
Diagram ref no 1 (Left) or 2 (Right)
These coolers are specified for Porsche Cayenne (9YA) models equipped with the 3.0 L turbocharged engine from approximately 2019 onward. They are positioned left and right in the charge-air circuit and are sold individually.
Applications
• Turbo system service: Replace damaged, cracked, or leaking charge air coolers due to wear or debris impact.
• Performance restoration: Restore intake charge cooling efficiency after boost system repairs.
• Diagnostics repair: Address symptoms such as reduced power, increased intake temps, or boost leaks
The charge air cooler cools the turbocharged intake air before it enters the engine’s combustion chambers. By reducing intake air temperature:
• Air becomes denser, carrying more oxygen
• Combustion becomes more efficient
• Power and torque output is more consistent
• Risk of detonation (engine knock) is reduced
• Turbocharger spool-up can become more responsive
A failing or inefficient charge air cooler can cause higher intake air temperatures, reduced power output, inconsistent boost delivery, increased engine knock risk, and poorer fuel economy. Damaged or leaking intercoolers also encourage intake pressure loss, reducing performance and drivability. Installing an OE Match charge air cooler restores optimized charge-air cooling, helping the engine produce power consistently, run cooler, and meet emissions expectations.
When to replace. Replace the charge air cooler when you observe any of the following:
• Noticeable power loss or inconsistent boost pressure
• Heat-soak symptoms under sustained load or hot weather
• Visible external damage, bent core tubes, or leaking seams
• Oily residue inside or outside the cooler (sign of turbocharger oil contamination)
• During turbocharger service, intake system overhaul, or front-end repair.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB14580
PAB145803A
PAB145804A
PAB14580320
PAB14580420
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 9YA Cayenne V6 3.0L Petrol (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe V6 3.0L Petrol (340Hp) 2019-23
- Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L (340Hp) 2020-23
- Porsche 9YA.2 Cayenne V6 3.0L Petrol (353Hp) 2023>>
- Porsche 9YA.2 Cayenne Coupe V6 3.0L (353Hp) 2023>>
- Porsche 9YA.2 Cayenne E-Hybrid V6 3.0L (470Hp) 2023>>
- Porsche 9YA.2 Cayenne E-Hybrid Coupe V6 3.0L (470Hp) 2023>>
Select below:
Prices from: €292.50
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
AIRCONPIPE.964
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
AIRCONPIPE.964
The product you are viewing cross references to these numbers
Product Information
Air conditioning refrigerant pressure lines SET OF 2 Rear. Including:
1 x Air conditioning refrigerant pressure line 96457309708
1 x Air conditioning refrigerant suction line 96457309901
1 x O-ring seal.99970743441
1 x O-Ring 99970725140
2 x screw hex. hd. PCG06702802
2 x Front bumper washer 90002500703
Fits:
Porsche 964 C2 / C4 / RS 1989-92*
Porsche 964 C2 / C4 / RS 1993-94
*Early cars may need to update adjoining pipe 96457310503 as design has changed and end fittings will be different
Diagram ref no 11, 12, 13, 2, 15, 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
AIRCONPIPE.964
96457309708
96457309705
96457309701
96457309700
96457309901
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Air conditioning refrigerant pressure line, Rear. Porsche 964 1989-94 (96457309708/1)
1 x Air conditioning refrigerant suction line, Rear. Porsche 964 1989-94 (96457309901/1)
1 x Radiator air conditioning (air con) O-ring seal. Porsche 986 / 996 (99970743441)
1 x O-Ring (99970725140)
2 x screw hex. hd. (PCG06702802)
2 x Front bumper washer. Porsche 911 1984-89 (90002500703)
Vehicle Group
Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
Price: €435.05
Orderable
Breather Hose - Coolant Reservoir Filler Neck. Porsche 718 (982) Boxster & Cayman 2.0L / 2.5L 2017>>
982121533F/1
Product Information
Diagram Ref No 11
What This Product Does:
Symptoms Of Wear Or Failure:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121533F
The product you are viewing cross references to these numbers
Product Information
Breather Hose - Coolant Reservoir Filler Neck.Maintain proper cooling system ventilation and reservoir performance with the Breather Hose – Coolant Reservoir Filler Neck. This OE MATCH breather hose connects to the coolant reservoir filler neck, allowing excess air and vapor to vent correctly as coolant expands and contracts during normal engine operation.
Fits:
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Diagram Ref No 11
What This Product Does:
- Vents trapped air from the coolant reservoir area
- Helps regulate cooling system pressure as coolant expands and contracts
- Prevents pressure buildup that can cause leaks or hose damage
- Supports proper coolant reservoir and cooling system performance
Symptoms Of Wear Or Failure:
- Coolant leaks near the reservoir filler neck
- Sweet coolant smell from the engine bay
- Coolant residue or staining around hose connections
- Cracked, brittle, or hardened hose material
- Collapsed or kinked hose restricting proper venting
- Pressure buildup in the cooling system
- Swollen hoses due to improper ventilation
- Low coolant warning light if leaks develop
- Replacing a worn breather hose is important because it helps the coolant reservoir vent properly and maintain correct cooling system pressure. Over time, heat and coolant exposure can cause the hose to become brittle, cracked, or restricted.
- If the hose fails, it may lead to coolant leaks, pressure buildup, and added strain on surrounding hoses, seals, and the reservoir itself. Poor ventilation can also reduce cooling system efficiency and increase the risk of overheating.
- Installing a new breather hose helps restore proper venting, prevent leaks, and protect the engine by keeping the cooling system operating reliably.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121533F
982121533F
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Price: €19.15
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
91153107
Product Information
Fits:
Porsche 911 (1977 - 1984)
Porsche 911 Turbo (1977 - 1984)
Porsche 911 Carrera (1984 - 1984)
Click 'Zoom in' for large parts diagram.
Diagram ref no 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91153107
The product you are viewing cross references to these numbers
Product Information
Pushbutton bearing for pushbutton rodFits:
Porsche 911 (1977 - 1984)
Porsche 911 Turbo (1977 - 1984)
Porsche 911 Carrera (1984 - 1984)
Click 'Zoom in' for large parts diagram.
Diagram ref no 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91153107
91153107601
91153107501
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Select below
Prices from: €53.64
Shop Securely
12 Month Warranty
Worldwide Delivery
982121637A/1
Product Information
Ensure proper cooling system ventilation and coolant circulation with the Coolant Hose – Expansion Tank to Bleeder Valve. This OE MATCH hose connects the expansion tank to the bleeder valve, allowing trapped air to escape and helping maintain correct system pressure during engine operation.
Fits:
Diagram Ref No 5
What This Product Does:
Symptoms Of Wear Or Failure:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121637A
The product you are viewing cross references to these numbers
Product Information
Coolant Hose - Expansion Tank To Bleeder Valve.Ensure proper cooling system ventilation and coolant circulation with the Coolant Hose – Expansion Tank to Bleeder Valve. This OE MATCH hose connects the expansion tank to the bleeder valve, allowing trapped air to escape and helping maintain correct system pressure during engine operation.
Fits:
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Diagram Ref No 5
What This Product Does:
- Allows trapped air to escape during coolant circulation
- Helps prevent air pockets in the cooling system
- Supports stable coolant pressure regulation
- Maintains consistent engine operating temperature
- Promotes efficient coolant flow throughout the system
Symptoms Of Wear Or Failure:
- Coolant leaks near the expansion tank or bleeder valve connection
- Low coolant warning light or frequent coolant top-offs
- Sweet coolant smell from the engine bay
- Coolant residue or staining around hose fittings
- Cracks, splits, or brittle hose material
- Air trapped in the cooling system, causing gurgling sounds
- Fluctuating engine temperature or inconsistent temperature gauge readings
- Overheating, especially after coolant service or refilling
- Steam from under the hood in severe cases
- This hose plays a key role in allowing the cooling system to properly vent air and maintain stable pressure. If it becomes cracked, brittle, or blocked, air can remain trapped in the system, leading to inconsistent coolant circulation and temperature fluctuations.
- Failure to replace a worn hose may result in coolant leaks, pressure imbalance, overheating, and reduced cooling efficiency. Air pockets in the system can also place additional strain on other cooling components.
- Replacing the hose helps ensure proper system bleeding, prevents leaks, and protects the engine by maintaining reliable temperature control and cooling system performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121637A
982121637A
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Price: €26.17
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
982121625B/1
Product Information
Diagram Ref No 6
What This Product Does:
Symptoms Of Wear Or Failure:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121625B
The product you are viewing cross references to these numbers
Product Information
Reservoir Coolant Hose.Maintain reliable cooling system performance with the Reservoir Coolant Hose. This OE MATCH hose is designed to transfer coolant between the coolant reservoir (expansion tank) and the engine cooling system, helping ensure proper coolant circulation and stable system pressure.
Fits:
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Diagram Ref No 6
What This Product Does:
- Moves coolant to and from the coolant reservoir
- Helps maintain proper coolant level and circulation
- Supports cooling system pressure balance during temperature changes
- Prevents overheating by ensuring consistent coolant flow
Symptoms Of Wear Or Failure:
- Coolant leaks near the reservoir or along the hose line
- Low coolant warning light
- Frequent coolant top-offs
- Sweet coolant smell from the engine bay
- Coolant residue or staining around hose connections
- Cracks, splits, or swelling in the hose material
- Soft, spongy, or brittle rubber texture
- Pressure-related seepage around clamps or fittings
- Engine running hotter than normal if coolant loss becomes severe
- Replacing a worn reservoir coolant hose is important because it helps maintain proper coolant circulation and supports stable cooling system pressure. Over time, heat and constant exposure to coolant can cause the hose to crack, weaken, or leak.
- If the hose fails, it may lead to coolant loss, poor pressure regulation, and overheating. Even small leaks can gradually reduce coolant levels and put the engine at risk of serious damage.
- Installing a new hose helps prevent leaks, restores reliable coolant flow, and protects the engine by keeping the cooling system operating efficiently.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121625B
982121625B
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Price: €17.61
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
982121036C/1
Product Information
Diagram Ref No 15 (Diagram Ref No 16 Sold Separately)
What This Product Does:
Symptoms Of Wear Or Failure:
Why Replacement Matters:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121036C
The product you are viewing cross references to these numbers
Product Information
Coolant Hose, Upper.Maintain optimal engine cooling performance with the Coolant Hose, Upper. This OE MATCH upper radiator hose is designed to transfer hot coolant from the engine to the radiator, where heat is dissipated to regulate operating temperature.
Fits:- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Diagram Ref No 15 (Diagram Ref No 16 Sold Separately)
What This Product Does:
- Transfers hot coolant from the engine to the radiator
- Enables proper heat dissipation
- Maintains stable engine operating temperature
- Supports continuous coolant circulation
Symptoms Of Wear Or Failure:
- Coolant leaks near the radiator or engine bay
- Engine overheating or rising temperature gauge
- Low coolant warning light
- Frequent coolant loss requiring top-offs
- Steam from under the hood
- Sweet coolant smell from the engine compartment
- Cracks, splits, or dry rot on the hose surface
- Swelling or bulging due to internal weakening
- Soft, spongy, or brittle hose texture
- Coolant residue or wetness around hose clamps and fittings
Why Replacement Matters:
- The upper coolant hose is responsible for carrying hot coolant from the engine to the radiator for heat removal. If the hose becomes worn, cracked, or weakened, it can leak or fail under pressure, causing rapid coolant loss.
- A failed upper hose can quickly lead to engine overheating, which may result in serious damage such as warped components or head gasket failure. Because this hose operates under high heat and pressure, replacing it when signs of wear appear is essential for maintaining cooling system reliability.
- Replacing the hose helps restore proper coolant circulation, prevent leaks, and protect the engine from costly overheating-related repairs.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121036C
982121036C
982121036B
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Price: €37.88
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
94610593635KIT
Product Information
Diagram ref no 3, 4, 5 and 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610593635KIT
The product you are viewing cross references to these numbers
Product Information
Porsche 970.1 / 970.2 Panamera 3.6 V6 Cam Cover Gasket Set
The cam cover gasket set for the Porsche
970.1 / 970.2 Panamera 3.6 V6 provides essential sealing between engine
components to prevent oil leaks and maintain engine performance. This complete
gasket kit includes:
- Cam cover gasket x 2 – Creates a reliable seal between the cam (valve) cover and the cylinder head, preventing oil from escaping the top of the engine.
- Spark plug tube seals x 6 – Seal the wells around the spark plugs, keeping oil out of spark plug areas to ensure consistent ignition and combustion.
-
Throttle control element seal x 2 –
Provides a secure seal for the throttle control assembly and prevents oil
contamination or vacuum leaks.
Fits:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
Diagram ref no 3, 4, 5 and 6
Together, these seals protect the engine from oil leakage and maintain proper internal pressure, contributing to smooth and dependable Panamera V6 operation.
Why These Seals Fail
Engine seals like cam cover gaskets and spark
plug tube seals are subjected to high temperatures, repeated thermal expansion
and long-term pressure. Over time, these conditions can cause:
- Hardening and cracking from prolonged heat exposure
- Deformation and compression set from repeated cycling
- Oil breakdown that accelerates material fatigue
- Loss of sealing effectiveness after high mileage or extended service intervals
On the Porsche Panamera 970.1/970.2 3.6 V6, these faults are common as the engine ages and accumulates mileage.
Why You May Need a Replacement
If your Panamera displays signs of oil pooling around the top of the engine, dark residue around the cam cover seams, or misfires caused by oil in the spark plug wells, worn seals are likely the cause.
Oil intrusion into spark plug wells can lead
to:
- Fouled spark plugs
- Poor engine performance and rough idle
- Reduced fuel efficiency
- Increased maintenance costs
Replacing the cam cover gasket set restores proper sealing and prevents secondary issues such as spark plug misfires, throttle issues, and premature ignition system wear.
Many owners choose to replace the gasket set during routine maintenance, such as spark plug or ignition coil service, to streamline labour and avoid repeated engine access later.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610593635KIT
94810593702
94810593800
94610593600
94610593500
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Engine valve cover gasket, Cyl. 4-6. Porsche 970 Panamera (94610593600/1)
1 x Engine valve cover gasket, Cyl. 1-3. Porsche 970 Panamera (94610593500/1)
2 x Camshaft adjuster seal. Porsche 957 / 958 Cayenne / 970 Panamera V8 (94810593800/1)
6 x Gasket for spark plug holes in valve cover. Porsche 957 Cayenne / 958 Cayenne / 970 Panamera (94810593702/1)
Vehicle Group
Vehicle Group
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
Price: €126.00
In Stock - 3- 5 Days Dispatch
94610593600KIT
Product Information
Diagram ref no 4, 5 and 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610593600KIT
The product you are viewing cross references to these numbers
Product Information
Porsche 970.1 / 970.2 Panamera 3.6 V6 Cam Cover Gasket Set
The cam cover gasket set for the Porsche
970.1 / 970.2 Panamera 3.6 V6 provides essential sealing between engine
components to prevent oil leaks and maintain engine performance. This complete
gasket kit includes:
- Cam cover gasket – Creates a reliable seal between the cam (valve) cover and the cylinder head, preventing oil from escaping the top of the engine.
- Spark plug tube seals x 3 – Seal the wells around the spark plugs, keeping oil out of spark plug areas to ensure consistent ignition and combustion.
-
Throttle control element seal –
Provides a secure seal for the throttle control assembly and prevents oil
contamination or vacuum leaks.
Fits:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
Diagram ref no 4, 5 and 6
Together, these seals protect the engine from oil leakage and maintain proper internal pressure, contributing to smooth and dependable Panamera V6 operation.
Why These Seals Fail
Engine seals like cam cover gaskets and spark
plug tube seals are subjected to high temperatures, repeated thermal expansion
and long-term pressure. Over time, these conditions can cause:
- Hardening and cracking from prolonged heat exposure
- Deformation and compression set from repeated cycling
- Oil breakdown that accelerates material fatigue
- Loss of sealing effectiveness after high mileage or extended service intervals
On the Porsche Panamera 970.1/970.2 3.6 V6, these faults are common as the engine ages and accumulates mileage.
Why You May Need a Replacement
If your Panamera displays signs of oil pooling around the top of the engine, dark residue around the cam cover seams, or misfires caused by oil in the spark plug wells, worn seals are likely the cause.
Oil intrusion into spark plug wells can lead
to:
- Fouled spark plugs
- Poor engine performance and rough idle
- Reduced fuel efficiency
- Increased maintenance costs
Replacing the cam cover gasket set restores proper sealing and prevents secondary issues such as spark plug misfires, throttle issues, and premature ignition system wear.
Many owners choose to replace the gasket set during routine maintenance, such as spark plug or ignition coil service, to streamline labour and avoid repeated engine access later.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610593600KIT
94810593702
94810593800
94610593600
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Engine valve cover gasket, Cyl. 4-6. Porsche 970 Panamera (94610593600/1)
1 x Camshaft adjuster seal. Porsche 957 / 958 Cayenne / 970 Panamera V8 (94810593800/1)
3 x Gasket for spark plug holes in valve cover. Porsche 957 Cayenne / 958 Cayenne / 970 Panamera (94810593702/1)
Vehicle Group
Vehicle Group
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
Price: €61.83
In Stock - 24 Hour Dispatch
94610593500KIT
Product Information
Diagram ref no 3, 5 and 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610593500KIT
The product you are viewing cross references to these numbers
Product Information
Porsche 970.1 / 970.2 Panamera 3.6 V6 Cam Cover Gasket Set
The cam cover gasket set for the Porsche
970.1 / 970.2 Panamera 3.6 V6 provides essential sealing between engine
components to prevent oil leaks and maintain engine performance. This complete
gasket kit includes:
- Cam cover gasket – Creates a reliable seal between the cam (valve) cover and the cylinder head, preventing oil from escaping the top of the engine.
- Spark plug tube seals x 3 – Seal the wells around the spark plugs, keeping oil out of spark plug areas to ensure consistent ignition and combustion.
-
Throttle control element seal –
Provides a secure seal for the throttle control assembly and prevents oil
contamination or vacuum leaks.
Fits:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
Diagram ref no 3, 5 and 6
Together, these seals protect the engine from oil leakage and maintain proper internal pressure, contributing to smooth and dependable Panamera V6 operation.
Why These Seals Fail
Engine seals like cam cover gaskets and spark
plug tube seals are subjected to high temperatures, repeated thermal expansion
and long-term pressure. Over time, these conditions can cause:
- Hardening and cracking from prolonged heat exposure
- Deformation and compression set from repeated cycling
- Oil breakdown that accelerates material fatigue
- Loss of sealing effectiveness after high mileage or extended service intervals
On the Porsche Panamera 970.1/970.2 3.6 V6, these faults are common as the engine ages and accumulates mileage.
Why You May Need a Replacement
If your Panamera displays signs of oil pooling around the top of the engine, dark residue around the cam cover seams, or misfires caused by oil in the spark plug wells, worn seals are likely the cause.
Oil intrusion into spark plug wells can lead
to:
- Fouled spark plugs
- Poor engine performance and rough idle
- Reduced fuel efficiency
- Increased maintenance costs
Replacing the cam cover gasket set restores proper sealing and prevents secondary issues such as spark plug misfires, throttle issues, and premature ignition system wear.
Many owners choose to replace the gasket set during routine maintenance, such as spark plug or ignition coil service, to streamline labour and avoid repeated engine access later.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610593500KIT
94610593500
94810593702
94810593800
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Engine valve cover gasket, Cyl. 1-3. Porsche 970 Panamera (94610593500/1)
1 x Camshaft adjuster seal. Porsche 957 / 958 Cayenne / 970 Panamera V8 (94810593800/1)
3 x Gasket for spark plug holes in valve cover. Porsche 957 Cayenne / 958 Cayenne / 970 Panamera (94810593702/1)
Vehicle Group
Vehicle Group
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
Price: €64.17
In Stock - 3- 5 Days Dispatch
982121049/1
Product Information
Ensure dependable cooling system performance with the Coolant Hose, Lower. This OE MATCH lower radiator hose is designed to carry coolant between the radiator and engine, supporting proper heat exchange and stable operating temperatures.
Fits:
Diagram Ref No 18
What This Product Does:
Symptoms Of Wear Or Failure:
Why Replacement Matters:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121049
The product you are viewing cross references to these numbers
Product Information
Coolant Hose, Lower.Ensure dependable cooling system performance with the Coolant Hose, Lower. This OE MATCH lower radiator hose is designed to carry coolant between the radiator and engine, supporting proper heat exchange and stable operating temperatures.
Fits:
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Diagram Ref No 18
What This Product Does:
- Returns cooled coolant from the radiator to the engine
- Maintains continuous coolant circulation
- Helps regulate engine operating temperature
- Prevents overheating by supporting efficient heat exchange
Symptoms Of Wear Or Failure:
- Coolant leaking beneath the vehicle
- Engine overheating or fluctuating temperature gauge
- Low coolant warning light
- Frequent coolant top-offs
- Steam from under the hood
- Sweet coolant odor from the engine bay
- Cracks, splits, or visible deterioration in the hose
- Bulging or swelling, indicating internal weakening
- Soft, mushy, or brittle rubber texture
- Coolant residue around hose clamps or connection points
Why Replacement Matters:
- The lower coolant hose plays a critical role in returning cooled coolant from the radiator back to the engine. If this hose becomes worn, cracked, or weakened, it can lead to coolant leaks and reduced circulation.
- Failure to replace a damaged hose may result in overheating, engine performance issues, or costly repairs caused by coolant loss. Because the lower hose operates under constant heat and pressure, deterioration over time is normal.
- Replacing it at the first signs of wear helps maintain proper coolant flow, protects the engine from overheating, and ensures reliable long-term cooling system performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121049
982121049
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Price: €46.80
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
982121030/1
Product Information
Maintain efficient engine cooling with the Coolant Hose, Radiator. This OE MATCH radiator hose is designed to carry coolant between the engine and radiator, ensuring proper heat dissipation and stable operating temperatures.
Fits:
Diagram Ref No 17
What This Product Does:
Symptoms Of Wear Or Failure:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121030
The product you are viewing cross references to these numbers
Product Information
Coolant Hose, Radiator.Maintain efficient engine cooling with the Coolant Hose, Radiator. This OE MATCH radiator hose is designed to carry coolant between the engine and radiator, ensuring proper heat dissipation and stable operating temperatures.
Fits:
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Diagram Ref No 17
What This Product Does:
- Carries hot coolant from the engine to the radiator
- Returns cooled coolant back to the engine for continuous circulation
- Helps prevent overheating and maintain stable engine temperature
- Supports overall cooling system efficiency and performance
Symptoms Of Wear Or Failure:
- Coolant leaks under the vehicle or near the radiator
- Engine overheating or rising temperature gauge
- Low coolant warning light
- Frequent need to top off coolant
- Steam from under the hood
- Sweet coolant smell from the engine bay
- Cracks, splits, or visible wear along the hose
- Bulging or swelling due to internal weakening
- Soft, spongy, or brittle hose texture
- Coolant residue or dampness around hose clamps or fittings
- Replacing a worn radiator coolant hose is essential because it plays a critical role in maintaining proper coolant circulation between the engine and radiator. Over time, heat, pressure, and constant coolant exposure can cause the hose to weaken, crack, or leak.
- If the hose fails, it can lead to rapid coolant loss and engine overheating, which may result in serious damage such as warped components or head gasket failure. A new hose helps restore reliable cooling system performance, prevents leaks, and protects the engine from costly overheating-related repairs.
- Timely replacement ensures safe operation and long-term engine reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982121030
982121030
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Price: €37.28
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
95834706900/1
Product Information
This OE Match power steering oil fluid cooler is direct-fit replacement cooler for Porsche 958 Cayenne, designed to regulate power steering fluid temperature for consistent system performance and component longevity.
Fits:
Cars without PDCC,
Cars with 8-speed auto transmission for all-wheel drive
Porsche 958 Cayenne 3.0L / 3.6L >>2014
Porsche 958 Cayenne 3.0L / 4.2L Diesel >>2014
Porsche 958 Cayenne S 4.8L >>2014
Cars without PDCC
Porsche 958 Cayenne 3.0L 2014 - 2018
Porsche 958 Cayenne 3.0L / 4.2L TDI 2014 - 2018
Cars with Anti-roll bar (front/rear) and PDCC
Porsche 958 Cayenne 3.6L 2014 - 2018
Porsche 958 Cayenne 3.0L Diesel 2014 - 2018
Cars with Anti-roll bar (front/rear) and PDCC,
Cars with 8-speed auto transmission for all-wheel drive
Porsche 958 Cayenne 3.6L 2014 - 2018
Diagram ref no 19
This OE Match power steering oil fluid cooler is manufactured to OE-equivalent standards, it installs in place of the original cooler with correct mounting and hose interfaces, making it ideal for replacement during power steering servicing, leak repair, or chassis work that disturbs the front cooling area.
The power steering oil fluid cooler helps control fluid temperature within the power steering system by transferring heat from the oil to the surrounding airflow. By lowering fluid temperature under load, it supports consistent steering feel, reduces fluid oxidation, and protects internal seals and bearings from premature wear.
Function
• Dissipates heat from circulating power steering fluid
• Maintains consistent fluid temperature for reliable steering performance
• Helps prevent fluid breakdown and seal deterioration
Over time, power steering coolers can clog, corrode, or leak due to heat cycling, road debris, and fluid contamination. A compromised cooler can lead to high steering fluid temperatures, reduced steering responsiveness, fluid foaming, and accelerated wear of steering components. Installing an OE Match power steering oil fluid cooler helps maintain steady fluid temperature, prolongs component life, and preserves smooth, predictable steering feel.
When to replace:
• Visible fluid leaks from the cooler core or hose connections
• Power steering fluid overheating or foaming
• Noticeable loss of steering assist under load
• During power steering pump or hose replacement
• After front-end impact or cooling circuit work
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95834706900
The product you are viewing cross references to these numbers
Product Information
Power steering oil fluid cooler.This OE Match power steering oil fluid cooler is direct-fit replacement cooler for Porsche 958 Cayenne, designed to regulate power steering fluid temperature for consistent system performance and component longevity.
Fits:
Cars without PDCC,
Cars with 8-speed auto transmission for all-wheel drive
Porsche 958 Cayenne 3.0L / 3.6L >>2014
Porsche 958 Cayenne 3.0L / 4.2L Diesel >>2014
Porsche 958 Cayenne S 4.8L >>2014
Cars without PDCC
Porsche 958 Cayenne 3.0L 2014 - 2018
Porsche 958 Cayenne 3.0L / 4.2L TDI 2014 - 2018
Cars with Anti-roll bar (front/rear) and PDCC
Porsche 958 Cayenne 3.6L 2014 - 2018
Porsche 958 Cayenne 3.0L Diesel 2014 - 2018
Cars with Anti-roll bar (front/rear) and PDCC,
Cars with 8-speed auto transmission for all-wheel drive
Porsche 958 Cayenne 3.6L 2014 - 2018
Diagram ref no 19
This OE Match power steering oil fluid cooler is manufactured to OE-equivalent standards, it installs in place of the original cooler with correct mounting and hose interfaces, making it ideal for replacement during power steering servicing, leak repair, or chassis work that disturbs the front cooling area.
The power steering oil fluid cooler helps control fluid temperature within the power steering system by transferring heat from the oil to the surrounding airflow. By lowering fluid temperature under load, it supports consistent steering feel, reduces fluid oxidation, and protects internal seals and bearings from premature wear.
Function
• Dissipates heat from circulating power steering fluid
• Maintains consistent fluid temperature for reliable steering performance
• Helps prevent fluid breakdown and seal deterioration
Over time, power steering coolers can clog, corrode, or leak due to heat cycling, road debris, and fluid contamination. A compromised cooler can lead to high steering fluid temperatures, reduced steering responsiveness, fluid foaming, and accelerated wear of steering components. Installing an OE Match power steering oil fluid cooler helps maintain steady fluid temperature, prolongs component life, and preserves smooth, predictable steering feel.
When to replace:
• Visible fluid leaks from the cooler core or hose connections
• Power steering fluid overheating or foaming
• Noticeable loss of steering assist under load
• During power steering pump or hose replacement
• After front-end impact or cooling circuit work
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95834706900
95834706900
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
Price: €116.42
Orderable - 45 to 60 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
RADANDPIPEKIT958.30D.OEM
Product Information
This complete radiator water, hose, and mounting kit is a service solution for the Porsche Cayenne 958 3.0L Diesel (2011–2018) cooling system. It combines a durable OE Match radiator core with genuine coolant hoses, genuine mounts, and genuine hose clamps — everything needed to reliably refresh the centre section of the cooling system in one comprehensive set.
Fits:
Porsche 958 Cayenne 3.0L Diesel 2011 - 2018
(1) Diagram Ref No 1, 12, 15
(2) Diagram Ref No 21, 19, 25, 18
The radiator and associated hoses form the primary coolant circulation loop between the engine and the heat exchanger (radiator). Coolant absorbs heat from the engine and delivers it to the radiator core, where air flowing through the fins disperses the heat before the cooled fluid returns to the engine. Proper cooling keeps the diesel engine within optimal operating temperature, preventing overheating and protecting key drivetrain and emission system components.
Function
• Radiator: Dissipates heat from engine coolant to the ambient air stream
• Hoses: Provide reliable, leak-free transfer of coolant between engine and radiator
• Mounts: Secure radiator in place with correct isolation and alignment
• Clamps: Seal hose connections tightly to prevent coolant leaks
A compromised radiator or degraded hoses reduce the cooling system’s ability to maintain stable engine temperatures - especially important for diesel engines, which operate at high thermal loads. Symptoms of wear or failure include coolant leaks, rising temperature gauge readings, poor heater performance, and potential engine derate. Installing this comprehensive cooling kit restores proper coolant flow, limits overheating risk, and protects your engine’s longevity.
When to replace
Replace the radiator and related hoses/mounts when you observe:
• Visible leaks or coolant residue
• Overheating under load or in traffic
• Soft, swollen, or cracked hoses
• Loose or corroded hose clamps
• Coolant odour or steam from the engine bay
• Prior to seasonal extremes
• During front-end collision repair or cooling system overhaul
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RADANDPIPEKIT958.30D.OEM
The product you are viewing cross references to these numbers
Product Information
Radiator water with hoses, Centre.This complete radiator water, hose, and mounting kit is a service solution for the Porsche Cayenne 958 3.0L Diesel (2011–2018) cooling system. It combines a durable OE Match radiator core with genuine coolant hoses, genuine mounts, and genuine hose clamps — everything needed to reliably refresh the centre section of the cooling system in one comprehensive set.
Fits:
Porsche 958 Cayenne 3.0L Diesel 2011 - 2018
(1) Diagram Ref No 1, 12, 15
(2) Diagram Ref No 21, 19, 25, 18
The radiator and associated hoses form the primary coolant circulation loop between the engine and the heat exchanger (radiator). Coolant absorbs heat from the engine and delivers it to the radiator core, where air flowing through the fins disperses the heat before the cooled fluid returns to the engine. Proper cooling keeps the diesel engine within optimal operating temperature, preventing overheating and protecting key drivetrain and emission system components.
Function
• Radiator: Dissipates heat from engine coolant to the ambient air stream
• Hoses: Provide reliable, leak-free transfer of coolant between engine and radiator
• Mounts: Secure radiator in place with correct isolation and alignment
• Clamps: Seal hose connections tightly to prevent coolant leaks
A compromised radiator or degraded hoses reduce the cooling system’s ability to maintain stable engine temperatures - especially important for diesel engines, which operate at high thermal loads. Symptoms of wear or failure include coolant leaks, rising temperature gauge readings, poor heater performance, and potential engine derate. Installing this comprehensive cooling kit restores proper coolant flow, limits overheating risk, and protects your engine’s longevity.
When to replace
Replace the radiator and related hoses/mounts when you observe:
• Visible leaks or coolant residue
• Overheating under load or in traffic
• Soft, swollen, or cracked hoses
• Loose or corroded hose clamps
• Coolant odour or steam from the engine bay
• Prior to seasonal extremes
• During front-end collision repair or cooling system overhaul
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RADANDPIPEKIT958.30D.OEM
95810613210
95810640250
95810640140
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Radiator water, Centre. Porsche 958 Cayenne 3.6L / Hybrid / Diesel (95810613210/2)
2 x Rubber Buffer For Radiator. Porsche 958 / 9YA / 9YA.2 Cayenne / 971.1 / 971.2 / 976 Panamera 2010>> (95810665100)
2 x rubber isolator (958121275)
1 x Radiator coolant hose, return. Porsche 958 Cayenne 3.0L Diesel 2012-18 (95810640250)
1 x Radiator coolant hose, upper. Porsche 958 Cayenne 3.0L Diesel 2012-18 (95810640140)
1 x spring clip (N90926501)
1 x Hose Clamp (99951266509)
Vehicle Group
Vehicle Group
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
Price: €612.71
Orderable
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
RADANDPIPEKIT958.36.OEM
Product Information
This complete radiator water, hose, and mounting kit is a service solution for the Porsche Cayenne 958 3.6 L (2011–2018) cooling system. It combines a durable OE Match radiator core with both OE and OE Match cooling hoses, genuine mounting components, and all necessary clamps - delivering everything needed to refresh the core section of the engine’s cooling circuit in one comprehensive set.
Fits:
Porsche 958 Cayenne 3.6L 2011 - 2018
(1) Diagram Ref No 1, 12, 15
(2) Diagram Ref No 10, 11, 13, 14
The radiator and associated hoses form the primary coolant circulation loop that extracts heat from the engine and releases it to the surrounding air. The radiator’s fins and tubes provide a large surface area for heat exchange, while the hoses direct coolant flow between the engine, radiator, and thermostat housing. Mounts and clamps ensure everything stays secure and sealed under vibration and temperature cycling.
Together, they:
• Maintain optimal engine operating temperatures
• Prevent overheating under load
• Ensure consistent heater performance
• Protect the engine from thermal stress and premature wear
• Provide correct physical support and routing
Function
• Radiator: Efficiently dissipates engine heat through coolant circulation and airflow
• Hoses: Provide leak-free coolant transfer between engine and radiator
• Mounts: Secure and isolate the radiator from chassis vibration
• Clamps: Ensure leak-free hose connections at engine, radiator, and cooling outlets
Radiators and coolant hoses endure heat, pressure, pressure swings, and road contaminants that can cause swelling, cracking, leaks, or core blockage over time. Failed cooling components can lead to engine overheating, poor performance, erratic temperature readings, and long-term engine damage. A complete replacement with proper parts restores the cooling system to a reliable and effective state with the correct fit, reducing the risk of failure and improving overall reliability.
When to replace
Replace the radiator and related hoses/mounts when you observe:
• Visible leaks or coolant residue
• Overheating under load or in traffic
• Soft, swollen, or cracked hoses
• Loose or corroded hose clamps
• Coolant odour or steam from the engine bay
• Prior to seasonal extremes
• During front-end collision repair or cooling system overhaul
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RADANDPIPEKIT958.36.OEM
The product you are viewing cross references to these numbers
Product Information
Radiator water with hoses, Centre.This complete radiator water, hose, and mounting kit is a service solution for the Porsche Cayenne 958 3.6 L (2011–2018) cooling system. It combines a durable OE Match radiator core with both OE and OE Match cooling hoses, genuine mounting components, and all necessary clamps - delivering everything needed to refresh the core section of the engine’s cooling circuit in one comprehensive set.
Fits:
Porsche 958 Cayenne 3.6L 2011 - 2018
(1) Diagram Ref No 1, 12, 15
(2) Diagram Ref No 10, 11, 13, 14
The radiator and associated hoses form the primary coolant circulation loop that extracts heat from the engine and releases it to the surrounding air. The radiator’s fins and tubes provide a large surface area for heat exchange, while the hoses direct coolant flow between the engine, radiator, and thermostat housing. Mounts and clamps ensure everything stays secure and sealed under vibration and temperature cycling.
Together, they:
• Maintain optimal engine operating temperatures
• Prevent overheating under load
• Ensure consistent heater performance
• Protect the engine from thermal stress and premature wear
• Provide correct physical support and routing
Function
• Radiator: Efficiently dissipates engine heat through coolant circulation and airflow
• Hoses: Provide leak-free coolant transfer between engine and radiator
• Mounts: Secure and isolate the radiator from chassis vibration
• Clamps: Ensure leak-free hose connections at engine, radiator, and cooling outlets
Radiators and coolant hoses endure heat, pressure, pressure swings, and road contaminants that can cause swelling, cracking, leaks, or core blockage over time. Failed cooling components can lead to engine overheating, poor performance, erratic temperature readings, and long-term engine damage. A complete replacement with proper parts restores the cooling system to a reliable and effective state with the correct fit, reducing the risk of failure and improving overall reliability.
When to replace
Replace the radiator and related hoses/mounts when you observe:
• Visible leaks or coolant residue
• Overheating under load or in traffic
• Soft, swollen, or cracked hoses
• Loose or corroded hose clamps
• Coolant odour or steam from the engine bay
• Prior to seasonal extremes
• During front-end collision repair or cooling system overhaul
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RADANDPIPEKIT958.36.OEM
95810613210
95810640211
95810640111
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Radiator water, Centre. Porsche 958 Cayenne 3.6L / Hybrid / Diesel (95810613210/2)
2 x Rubber Buffer For Radiator. Porsche 958 / 9YA / 9YA.2 Cayenne / 971.1 / 971.2 / 976 Panamera 2010>> (95810665100)
2 x rubber isolator (958121275)
1 x Radiator coolant hose, lower. Porsche 958 Cayenne 3.6L 2011-18 (95810640211)
1 x Water coolant top hose. Porsche 958 Cayenne 3.6ltr (95810640111/1)
1 x Spring band clamp (N90687201)
2 x spring clip (N90926501)
2 x Spring band clamp (N90687001)
Vehicle Group
Vehicle Group
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
Price: €511.66
Orderable
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information