Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
About OE Match
OE Match for Porsche
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations
A Quick Look at OE Match
OE Match information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where OE Match is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Often chosen when owners want OE-equivalent quality with sensible running costs, especially for routine service and wear items.
- Typical reasons to replace include restoring reliability, addressing age-related wear, or refreshing multiple components during larger repair work.
- Common defects from incorrect application include noise, premature wear, leaks, or fitment quirks if the wrong variant is selected or fitted with old seals/hardware.
- Watch for symptoms such as unusual noises, early wear, or repeat failures after recent work, which can indicate mismatched parts or supporting items left worn.
- Always cross-check OEM part numbers, read model-year notes, and verify compatibility before ordering.
- For safety-critical components, confirm specification and fitment carefully and have installation checked by a competent technician.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, longer stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
Brake Pad Wear Sensors — Brake pad wear sensors are replaced when pads are renewed or when warning lights indicate a broken or worn sensor. Symptoms include brake wear warnings even with new pads, damaged sensor cables, or broken clips around the caliper area.
Engine Electrical — Engine electrical parts are changed when there are starting, charging, ignition, or sensor-related faults that affect drivability and reliability, such as intermittent no-start, misfires, rough idle, poor charging, warning lights or heat-soak failures.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected, often resolving hard starting, rough idle, poor fuel economy and warning lights caused by clogged filters or worn ignition components.
Service Kits — Service kits bundle key service components to simplify maintenance and set the car back to a known baseline, especially useful when catching up on overdue servicing or dealing with general sluggish running, inconsistent idle and reduced performance.
- For brake parts, confirm whether items are OE-equivalent replacements or performance upgrades and check if new fitting kits and sensors are required.
- On service items and kits, match the kit to your exact Porsche model, engine and year, and review what is included so you can add any extra “while you are there” parts.
Explore OE Match at Design911
View the current OE Match range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
99610652973/1KIT
Product Information
Fits:
Porsche 996 Turbo / GT2 2001-05
Porsche 996 GT3 1999-05
Click 'Zoom in' for large parts diagram.
Diagram ref no 19, 20, 21, 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610652973
The product you are viewing cross references to these numbers
Product Information
Coolant hoses at water pump housing. SET OF 2Fits:
Porsche 996 Turbo / GT2 2001-05
Porsche 996 GT3 1999-05
Click 'Zoom in' for large parts diagram.
Diagram ref no 19, 20, 21, 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610652973
99610652973
99610652971
99610647775
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Coolant hose at water pump housing. Porsche 996 Turbo / 996 GT2 / 996 GT3 (99610652973/1)
1 x Coolant hose at water pump housing. Porsche 996 Turbo / 996 GT2 / 996 GT3 (99610647775/1)
2 x Jubilee clip for oil separator hose on Porsche 986 / 996 (99951255101)
2 x Oil Pipe Clamp. Porsche 964 1989-94 (99951235602)
Vehicle Group
Vehicle Group
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Price: €101.18
Due In 21 Days
RADANDPIPEKIT958.V8.OEM
Product Information
This OE Match cooling system kit is a complete radiator and hose assembly engineered to refresh the core water/coolant circuit for the Porsche Cayenne 958 4.8 L from 2011 through 2018. It combines an OE Match radiator with precisely matched coolant hoses, genuine radiator mounts, and genuine hose clamps - everything needed to restore proper coolant flow and engine thermal management in one convenient package.
Fits:
Porsche 958 Cayenne 4.8L S / GTS / Turbo 2011 - 2018
* PR: D6V, D58, DT1, DT5
(1) Diagram Ref No 1, 12, 15
(2) Diagram Ref No 11, 12, 13
The cooling system in high-performance SUVs like the Cayenne 4.8 L must manage significant heat generated by the V8 engine, especially during heavy load, highway driving, towing, or hot ambient conditions. Over time, radiator cores can lose efficiency and material integrity, and hoses can harden, swell, or crack, leading to leaks or reduced coolant circulation.
This kit forms the core of the Cayenne’s coolant circulation loop at the centre radiator position. The radiator dissipates engine heat through airflow while the hoses route coolant in and out of the heat exchanger. Proper function of these components maintains optimal engine temperature, prevents overheating, supports heater performance, and protects critical components like cylinder heads, head gaskets, and turbocharger interfaces from thermal stress.
Function
• Radiator: Transfers heat away from coolant to ambient air
• Coolant Hoses: Provide secure, leak-free coolant routing
• Mounts: Secure radiator in place with correct vibration isolation
• Clamps: Ensure watertight connections under pressure and thermal cycling
Over time, radiator cores and coolant hoses degrade from heat cycling, pressure fluctuations, and environmental exposure. A weakened radiator or aging hoses can cause coolant leaks, overheating, inconsistent temperature readings, heater performance issues, and increased stress on the engine cooling network. Replacing these components as a matched kit increases reliability, restores cooling efficiency, and reduces the risk of roadside breakdowns and expensive engine repairs.
When to replace:
• Coolant leaks at the radiator or hose joints
• Frequent temperature gauge fluctuations
• Hose bulging, cracking, or soft spots
• Bent, collapsed, or clogged radiator fins
• During scheduled cooling system service
• After front-end collision or coolant system work
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RADANDPIPEKIT958.V8.OEM
The product you are viewing cross references to these numbers
Product Information
Radiator water with hoses. Centre.This OE Match cooling system kit is a complete radiator and hose assembly engineered to refresh the core water/coolant circuit for the Porsche Cayenne 958 4.8 L from 2011 through 2018. It combines an OE Match radiator with precisely matched coolant hoses, genuine radiator mounts, and genuine hose clamps - everything needed to restore proper coolant flow and engine thermal management in one convenient package.
Fits:
Porsche 958 Cayenne 4.8L S / GTS / Turbo 2011 - 2018
* PR: D6V, D58, DT1, DT5
(1) Diagram Ref No 1, 12, 15
(2) Diagram Ref No 11, 12, 13
The cooling system in high-performance SUVs like the Cayenne 4.8 L must manage significant heat generated by the V8 engine, especially during heavy load, highway driving, towing, or hot ambient conditions. Over time, radiator cores can lose efficiency and material integrity, and hoses can harden, swell, or crack, leading to leaks or reduced coolant circulation.
This kit forms the core of the Cayenne’s coolant circulation loop at the centre radiator position. The radiator dissipates engine heat through airflow while the hoses route coolant in and out of the heat exchanger. Proper function of these components maintains optimal engine temperature, prevents overheating, supports heater performance, and protects critical components like cylinder heads, head gaskets, and turbocharger interfaces from thermal stress.
Function
• Radiator: Transfers heat away from coolant to ambient air
• Coolant Hoses: Provide secure, leak-free coolant routing
• Mounts: Secure radiator in place with correct vibration isolation
• Clamps: Ensure watertight connections under pressure and thermal cycling
Over time, radiator cores and coolant hoses degrade from heat cycling, pressure fluctuations, and environmental exposure. A weakened radiator or aging hoses can cause coolant leaks, overheating, inconsistent temperature readings, heater performance issues, and increased stress on the engine cooling network. Replacing these components as a matched kit increases reliability, restores cooling efficiency, and reduces the risk of roadside breakdowns and expensive engine repairs.
When to replace:
• Coolant leaks at the radiator or hose joints
• Frequent temperature gauge fluctuations
• Hose bulging, cracking, or soft spots
• Bent, collapsed, or clogged radiator fins
• During scheduled cooling system service
• After front-end collision or coolant system work
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RADANDPIPEKIT958.V8.OEM
95810613200
95810640200
95810640100
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Radiator water, Centre. Porsche 958 Cayenne 4.8L 2011-18 (95810613200/1)
2 x Rubber Buffer For Radiator. Porsche 958 / 9YA / 9YA.2 Cayenne / 971.1 / 971.2 / 976 Panamera 2010>> (95810665100)
2 x rubber isolator (958121275)
1 x Water coolant top hose supply. Porsche 958 Cayenne 4.8L V8 (95810640200)
1 x Water coolant top hose return. Porsche 958 Cayenne 4.8ltr V8 (95810640100/1)
2 x spring clip (N90926501)
Vehicle Group
Vehicle Group
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Price: €772.11
Orderable - 45 to 60 Days
9P11214
Product Information
Ensure proper cooling system ventilation and pressure control with the OE MATCH Breather Line, Cooler for Coolant. This breather line is designed to route air and vapor from the coolant cooler system, helping maintain stable pressure and efficient coolant circulation under varying engine temperatures.
Fits:
Diagram Ref No 20
What This Product Does:
Symptoms Of Wear Or Failure:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P11214
The product you are viewing cross references to these numbers
Product Information
Breather Line, Cooler For Coolant.Ensure proper cooling system ventilation and pressure control with the OE MATCH Breather Line, Cooler for Coolant. This breather line is designed to route air and vapor from the coolant cooler system, helping maintain stable pressure and efficient coolant circulation under varying engine temperatures.
Fits:
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Boxster Spyder / Sypder RS 718 4.0L 01/2019>>
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp) 01/2020>>
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp) 01/2020>>
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Speedster 4.0L (510Bhp) 2019
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Diagram Ref No 20
What This Product Does:
- Vents air and vapor from the coolant cooler system
- Helps regulate cooling system pressure
- Supports consistent coolant circulation
- Reduces strain on hoses, seals, and cooling components
Symptoms Of Wear Or Failure:
- Coolant leaks near the coolant cooler or hose connections
- Sweet coolant smell from the engine bay
- Coolant residue or staining around fittings and clamps
- Cracked, brittle, or collapsed hose material
- Loose or leaking hose connections
- Gradual coolant loss requiring frequent top-offs
- Pressure buildup in the cooling system (may cause swelling hoses)
- Steam from under the hood in more severe cases
- Engine temperature running higher than normal if coolant flow is affected
- Replacing a worn or damaged coolant cooler breather line is important because it helps the cooling system properly vent air and regulate pressure during normal engine operation. Over time, heat and constant exposure to coolant can cause the line to become brittle, cracked, or leak.
- If the breather line fails, it can lead to coolant loss, pressure buildup, and added strain on surrounding hoses and seals. This may reduce cooling system efficiency and increase the risk of overheating or costly component damage.
- Installing a new breather line helps prevent leaks, supports stable cooling performance, and protects the engine by maintaining proper system pressure and ventilation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P11214
9P1121465
9P1121466
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Boxster Spyder / Sypder RS 718 4.0L 01/2019>>
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp) 01/2020>>
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp) 01/2020>>
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Speedster 4.0L (510Bhp) 2019
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Select Below
Prices from: €24.69
Shop Securely
12 Month Warranty
Worldwide Delivery
99733104505/3KIT.1
Product Information
The high-quality replacement built to OE specifications, it delivers the same fit, strength, and performance as the original part. This suspension component connects the wheel hub to the chassis, maintaining proper alignment and ensuring stable handling.
Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 987 Boxster 2005 - 2012
Porsche 987c Cayman 2006 - 2012
Porsche 996 C2 / C4 1997 - 2005
Porsche 996 Turbo 2000 - 2005
Porsche 996 GT3 1999 - 2005
Porsche 997 MKI 2006 - 2009
Porsche 997 GT3 2006 - 2009
Diagram ref no 12, 13, 15, 16
This product supersedes Porsche's old part numbers:
99633104506, 99633104508, 99633104510, 99633104512, 99733104504 , 99633104512
What this product does:
• Provides a secure connection between the chassis and wheel hub
• Maintains wheel alignment for safe, predictable handling
• Absorbs suspension forces while keeping steering precise
Over time, control arms can bend, wear, or develop excessive play in the bushings and ball joints. This can cause uneven tire wear, knocking noises, wheel alignment issues, and a noticeable loss of steering precision. Replacement will restore the correct wheel alignment and suspension stability for which your Porsche was designed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99733104505
The product you are viewing cross references to these numbers
Product Information
Control arms rear with ball joint & eccentric bolts and washers SET OF 2 The high-quality replacement built to OE specifications, it delivers the same fit, strength, and performance as the original part. This suspension component connects the wheel hub to the chassis, maintaining proper alignment and ensuring stable handling.
Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 987 Boxster 2005 - 2012
Porsche 987c Cayman 2006 - 2012
Porsche 996 C2 / C4 1997 - 2005
Porsche 996 Turbo 2000 - 2005
Porsche 996 GT3 1999 - 2005
Porsche 997 MKI 2006 - 2009
Porsche 997 GT3 2006 - 2009
Diagram ref no 12, 13, 15, 16
This product supersedes Porsche's old part numbers:
99633104506, 99633104508, 99633104510, 99633104512, 99733104504 , 99633104512
What this product does:
• Provides a secure connection between the chassis and wheel hub
• Maintains wheel alignment for safe, predictable handling
• Absorbs suspension forces while keeping steering precise
Over time, control arms can bend, wear, or develop excessive play in the bushings and ball joints. This can cause uneven tire wear, knocking noises, wheel alignment issues, and a noticeable loss of steering precision. Replacement will restore the correct wheel alignment and suspension stability for which your Porsche was designed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99733104505
99733104504
99633104506
99633104508
99633104510
99633104512
997.331.045.04
996.331.045.06
996.331.045.08
996.331.045.10
996.331.045.12
99733104505
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Control arm rear with ball joint. Porsche Boxster 987 / Cayman/ 996 / 997 (99733104505/3)
2 x Eccentric washer for alignment for Porsche Boxster / Cayman / 911 / Panamera / Taycan (PAF007648/1)
2 x Shock absorber hexagon hut. Porsche 996 / 993 (99908444501/1)
2 x Rear lower control arm adjust bolt. Porsche 996 / 997 / Boxster / Cayman (99733121702/1)
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Price: €201.56
In Stock - 3- 5 Days Dispatch
95810613200/1
Product Information
This OE Match radiator installs directly into the original mounting locations using existing coolant hoses and hardware, making installation straightforward and reliable for cooling system overhaul, radiator replacement, or maintenance service.
Fits:
Porsche 958 Cayenne 4.8L S / GTS / Turbo 2011 - 2018
* PR: D6V, D58, DT1, DT5
Diagram Ref No 1.
The radiator is the primary heat exchanger in the cooling system. Coolant heated by the engine flows through the radiator’s core, where airflow draws heat away before the coolant returns to the engine. This circulation:
• Maintains stable engine operating temperatures
• Prevents overheating under load or heat stress
• Supports efficient engine performance and emissions
• Ensures proper cabin heating when required
A failing or inefficient radiator can lead to engine overheating, poor climate control performance, coolant loss, and accelerated wear on other cooling system components. Symptoms such as rising temperature gauge readings, coolant leaks, or reduced heater output indicate that the radiator may no longer be functioning optimally. Replacing it with an OE Match radiator ensures reliable cooling performance and helps maintain engine health and longevity.
When to replace:
• Persistent engine overheating
• Visible coolant leaks or core corrosion
• Bent, damaged, or clogged cooling fins
• During front-end repair or cooling system service
• After water pump, thermostat, or main hose replacement
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95810613200
The product you are viewing cross references to these numbers
Product Information
Radiator water, Centre.This OE Match radiator installs directly into the original mounting locations using existing coolant hoses and hardware, making installation straightforward and reliable for cooling system overhaul, radiator replacement, or maintenance service.
Fits:
Porsche 958 Cayenne 4.8L S / GTS / Turbo 2011 - 2018
* PR: D6V, D58, DT1, DT5
Diagram Ref No 1.
The radiator is the primary heat exchanger in the cooling system. Coolant heated by the engine flows through the radiator’s core, where airflow draws heat away before the coolant returns to the engine. This circulation:
• Maintains stable engine operating temperatures
• Prevents overheating under load or heat stress
• Supports efficient engine performance and emissions
• Ensures proper cabin heating when required
A failing or inefficient radiator can lead to engine overheating, poor climate control performance, coolant loss, and accelerated wear on other cooling system components. Symptoms such as rising temperature gauge readings, coolant leaks, or reduced heater output indicate that the radiator may no longer be functioning optimally. Replacing it with an OE Match radiator ensures reliable cooling performance and helps maintain engine health and longevity.
When to replace:
• Persistent engine overheating
• Visible coolant leaks or core corrosion
• Bent, damaged, or clogged cooling fins
• During front-end repair or cooling system service
• After water pump, thermostat, or main hose replacement
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95810613200
95810613200
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Price: €579.15
Orderable - 45 to 60 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
9A712244710/1
Product Information
Maintain proper engine and cooling system ventilation with the OE MATCH Breather Line, Reservoir. This component is designed to route air and vapor from the reservoir system, helping regulate pressure and support smooth, efficient operation.
Fits:
Diagram Ref No 9
What This Product Does:
Symptoms Of Wear Or Failure:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9A712244710
The product you are viewing cross references to these numbers
Product Information
Breather Line, Reservoir. Maintain proper engine and cooling system ventilation with the OE MATCH Breather Line, Reservoir. This component is designed to route air and vapor from the reservoir system, helping regulate pressure and support smooth, efficient operation.
Fits:
- Porsche 971.1 Panamera V6 3.0L 2WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 3.0L Turbocharged V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD (440 Hp) 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 976 Panamera V6 2.9L 2023>>
- Porsche 976 Panamera 4 V6 2.9L 2023>>
- Porsche 976 Panamera 4 E-Hybrid V6 2.9L 2023>>
- Porsche 976 Panamera 4S E-Hybrid V6 2.9L 2023>>
Diagram Ref No 9
What This Product Does:
- Releases trapped air and pressure from the reservoir system
- Helps prevent pressure buildup that can stress hoses and seals
- Supports proper coolant reservoir operation during heating/cooling cycles
- Maintains stable cooling system performance
Symptoms Of Wear Or Failure:
- Coolant or vapor leaks near the reservoir area
- Sweet coolant smell from the engine bay
- Cracked, brittle, or collapsed hose material
- Loose or damaged hose connections
- Coolant residue buildup around fittings or clamps
- Pressure buildup in the cooling system (may cause swelling hoses)
- Coolant loss over time without obvious major leaks
- Check engine light (in some cases, if pressure/venting issues affect sensors)
- The reservoir breather line plays a key role in allowing the cooling system to safely vent air and vapor as temperatures rise and fall. If this line becomes cracked, brittle, or blocked, it can lead to improper pressure regulation within the system.
- Failure to replace a worn breather line may result in coolant leaks, pressure buildup, stressed hoses or seals, and reduced cooling system efficiency. Over time, this can contribute to overheating or additional component damage.
- Replacing the breather line helps maintain proper system ventilation, prevents unnecessary strain on cooling components, and supports long-term engine reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9A712244710
9A712244710
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 971.1 Panamera V6 3.0L 2WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 3.0L Turbocharged V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD (440 Hp) 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 976 Panamera V6 2.9L 2023>>
- Porsche 976 Panamera 4 V6 2.9L 2023>>
- Porsche 976 Panamera 4 E-Hybrid V6 2.9L 2023>>
- Porsche 976 Panamera 4S E-Hybrid V6 2.9L 2023>>
Price: €34.85
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
EXHFITTING964.3
Product Information
The OE Match Exhaust O-Ring & Clamp Kit is a complete hardware set designed to replace worn or deteriorated exhaust tail pipe O-rings and clamps on classic Porsche 964 models. These components help seal and secure the connection between the exhaust tail pipe and adjacent exhaust sections, ensuring a leak-free fit and proper exhaust alignment.
SET OF 6
Fits:
Porsche 964 C2 / C4 1989 - 1994
Diagram ref no 6 and 7
This OE Match exhaust hardware kit includes precisely sized O-rings, clamps, nuts, and bolts manufactured to meet OE-equivalent shape, dimensions, and material standards. Tail pipe O-rings provide a firm, resilient seal between slip-fit sections of the exhaust system, preventing exhaust gas leaks, vibration noise, and premature wear of mating surfaces. The clamps and fasteners are engineered to offer secure retention and long-term resistance to heat, vibration, and corrosion - common stressors in the exhaust environment.
Designed for classic air-cooled Porsche 911 models, this kit restores correct sealing and secure fitment of the tail pipe section - a crucial part of the exhaust path that influences sound, emissions, and engine performance.
Whether you’re performing routine exhaust maintenance, replacing worn hardware, or reinstalling components after service, this OE Match kit provides all the essential parts needed for a proper, direct-fit installation.
Over time, exhaust O-rings and clamps can become brittle, cracked, or corroded due to repeated heat cycles and exposure to the elements. Damaged seals or weak clamps can lead to exhaust leaks, increased noise, vibration, heat transfer to nearby components, and inefficient engine breathing. Replacing them with an OE Match kit restores proper sealing and secure mounting, helping maintain exhaust performance and engine efficiency.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHFITTING964.3
The product you are viewing cross references to these numbers
Product Information
Exhaust O-Rings and clamps SET OF 6 for Exhaust systemThe OE Match Exhaust O-Ring & Clamp Kit is a complete hardware set designed to replace worn or deteriorated exhaust tail pipe O-rings and clamps on classic Porsche 964 models. These components help seal and secure the connection between the exhaust tail pipe and adjacent exhaust sections, ensuring a leak-free fit and proper exhaust alignment.
SET OF 6
Fits:
Porsche 964 C2 / C4 1989 - 1994
Diagram ref no 6 and 7
This OE Match exhaust hardware kit includes precisely sized O-rings, clamps, nuts, and bolts manufactured to meet OE-equivalent shape, dimensions, and material standards. Tail pipe O-rings provide a firm, resilient seal between slip-fit sections of the exhaust system, preventing exhaust gas leaks, vibration noise, and premature wear of mating surfaces. The clamps and fasteners are engineered to offer secure retention and long-term resistance to heat, vibration, and corrosion - common stressors in the exhaust environment.
Designed for classic air-cooled Porsche 911 models, this kit restores correct sealing and secure fitment of the tail pipe section - a crucial part of the exhaust path that influences sound, emissions, and engine performance.
Whether you’re performing routine exhaust maintenance, replacing worn hardware, or reinstalling components after service, this OE Match kit provides all the essential parts needed for a proper, direct-fit installation.
Over time, exhaust O-rings and clamps can become brittle, cracked, or corroded due to repeated heat cycles and exposure to the elements. Damaged seals or weak clamps can lead to exhaust leaks, increased noise, vibration, heat transfer to nearby components, and inefficient engine breathing. Replacing them with an OE Match kit restores proper sealing and secure mounting, helping maintain exhaust performance and engine efficiency.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHFITTING964.3
96411124701
96411124702
96411124703
96411133600
PCG11133600
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
3 x Exhaust O-Ring for Tail pipe. Porsche 965 Turbo (96411124703/1)
3 x Exhaust clamp for tail pipe. Porsche 964 (96411133600/1)
Vehicle Group
Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Price: €117.60
Due In 7 Days
EXHFITTING964.1
Product Information
The OE Match Exhaust O-Ring & Clamp Kit is a complete hardware set designed to replace worn or deteriorated exhaust tail pipe O-rings and clamps on classic Porsche 964 models. These components help seal and secure the connection between the exhaust tail pipe and adjacent exhaust sections, ensuring a leak-free fit and proper exhaust alignment.
SET OF 2
Fits:
Porsche 964 C2 / C4 1989 - 1994
Diagram ref no 6 and 7
This OE Match exhaust hardware kit includes precisely sized O-rings, clamps, nuts, and bolts manufactured to meet OE-equivalent shape, dimensions, and material standards. Tail pipe O-rings provide a firm, resilient seal between slip-fit sections of the exhaust system, preventing exhaust gas leaks, vibration noise, and premature wear of mating surfaces. The clamps and fasteners are engineered to offer secure retention and long-term resistance to heat, vibration, and corrosion - common stressors in the exhaust environment.
Designed for classic air-cooled Porsche 911 models, this kit restores correct sealing and secure fitment of the tail pipe section - a crucial part of the exhaust path that influences sound, emissions, and engine performance.
Whether you’re performing routine exhaust maintenance, replacing worn hardware, or reinstalling components after service, this OE Match kit provides all the essential parts needed for a proper, direct-fit installation.
Over time, exhaust O-rings and clamps can become brittle, cracked, or corroded due to repeated heat cycles and exposure to the elements. Damaged seals or weak clamps can lead to exhaust leaks, increased noise, vibration, heat transfer to nearby components, and inefficient engine breathing. Replacing them with an OE Match kit restores proper sealing and secure mounting, helping maintain exhaust performance and engine efficiency.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHFITTING964.1
The product you are viewing cross references to these numbers
Product Information
Exhaust O-Ring and clamp kit for Tail pipe.The OE Match Exhaust O-Ring & Clamp Kit is a complete hardware set designed to replace worn or deteriorated exhaust tail pipe O-rings and clamps on classic Porsche 964 models. These components help seal and secure the connection between the exhaust tail pipe and adjacent exhaust sections, ensuring a leak-free fit and proper exhaust alignment.
SET OF 2
Fits:
Porsche 964 C2 / C4 1989 - 1994
Diagram ref no 6 and 7
This OE Match exhaust hardware kit includes precisely sized O-rings, clamps, nuts, and bolts manufactured to meet OE-equivalent shape, dimensions, and material standards. Tail pipe O-rings provide a firm, resilient seal between slip-fit sections of the exhaust system, preventing exhaust gas leaks, vibration noise, and premature wear of mating surfaces. The clamps and fasteners are engineered to offer secure retention and long-term resistance to heat, vibration, and corrosion - common stressors in the exhaust environment.
Designed for classic air-cooled Porsche 911 models, this kit restores correct sealing and secure fitment of the tail pipe section - a crucial part of the exhaust path that influences sound, emissions, and engine performance.
Whether you’re performing routine exhaust maintenance, replacing worn hardware, or reinstalling components after service, this OE Match kit provides all the essential parts needed for a proper, direct-fit installation.
Over time, exhaust O-rings and clamps can become brittle, cracked, or corroded due to repeated heat cycles and exposure to the elements. Damaged seals or weak clamps can lead to exhaust leaks, increased noise, vibration, heat transfer to nearby components, and inefficient engine breathing. Replacing them with an OE Match kit restores proper sealing and secure mounting, helping maintain exhaust performance and engine efficiency.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHFITTING964.1
96411124701
96411124702
96411124703
96411133600
PCG11133600
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Exhaust O-Ring for Tail pipe. Porsche 965 Turbo (96411124703/1)
1 x Exhaust clamp for tail pipe. Porsche 964 (96411133600/1)
Vehicle Group
Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Price: €39.20
In Stock - 24 Hour Dispatch
PAE121253/1
Product Information
The OE Match radiator is designed for straightforward, direct replacement using existing mounting points and coolant hose connections, making it an ideal solution for cooling system service, radiator damage repair, or preventative maintenance on higher-mile Panameras.
Fits:
Porsche 971.1 Panamera 2017 - 2020 with 'S' equipment (PR: A8F)
Porsche 971.1 Panamera 2017 - 2020 with 'turbo' equipment (PR: A8H)
Porsche 971.1 Panamera 2017 - 2020 Hybrid (PR:0K3) with 'Standard' equipment (PR:A8C)
Porsche 971.2 Panamera 2021 - 2023
Porsche 976 Panamera 2023 >>
Diagram Ref No 1
The water/coolant radiator serves as the cooling system’s primary heat exchanger, where hot coolant from the engine is cooled by airflow before being circulated back into the engine. This process helps:
• Maintain stable engine temperature
• Prevent overheating under load
• Improve heater and climate control performance
• Protect engine components from thermal stress
• Support efficient combustion and emissions control
A failing radiator can lead to engine overheating, coolant loss, performance penalties, and - in extreme cases - engine damage. Symptoms of radiator issues include rising temperature gauge readings, coolant leaks under the vehicle, reduced heater output, and visible core damage. Replacing an inefficient or damaged radiator with an OE Match unit restores effective cooling capability and helps maintain the Porsche Panamera’s performance and drivetrain health.
When to replace:
• Persistent engine overheating or temperature spikes
• Visible radiator leaks, punctures, or core corrosion
• Bent, clogged, or damaged cooling fins
• After front-end impact or collision
• During cooling system overhaul (water pump, thermostat, hoses)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAE121253
The product you are viewing cross references to these numbers
Product Information
Radiator for water coolant fluidThe OE Match radiator is designed for straightforward, direct replacement using existing mounting points and coolant hose connections, making it an ideal solution for cooling system service, radiator damage repair, or preventative maintenance on higher-mile Panameras.
Fits:
Porsche 971.1 Panamera 2017 - 2020 with 'S' equipment (PR: A8F)
Porsche 971.1 Panamera 2017 - 2020 with 'turbo' equipment (PR: A8H)
Porsche 971.1 Panamera 2017 - 2020 Hybrid (PR:0K3) with 'Standard' equipment (PR:A8C)
Porsche 971.2 Panamera 2021 - 2023
Porsche 976 Panamera 2023 >>
Diagram Ref No 1
The water/coolant radiator serves as the cooling system’s primary heat exchanger, where hot coolant from the engine is cooled by airflow before being circulated back into the engine. This process helps:
• Maintain stable engine temperature
• Prevent overheating under load
• Improve heater and climate control performance
• Protect engine components from thermal stress
• Support efficient combustion and emissions control
A failing radiator can lead to engine overheating, coolant loss, performance penalties, and - in extreme cases - engine damage. Symptoms of radiator issues include rising temperature gauge readings, coolant leaks under the vehicle, reduced heater output, and visible core damage. Replacing an inefficient or damaged radiator with an OE Match unit restores effective cooling capability and helps maintain the Porsche Panamera’s performance and drivetrain health.
When to replace:
• Persistent engine overheating or temperature spikes
• Visible radiator leaks, punctures, or core corrosion
• Bent, clogged, or damaged cooling fins
• After front-end impact or collision
• During cooling system overhaul (water pump, thermostat, hoses)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAE121253
9A712125300
PAE121253
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD (550 Hp) 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive 2017-20
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera GTS 4.0L V8 2021-23
- Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8 2021-23
- Porsche 976 Panamera V6 2.9L 2023>>
- Porsche 976 Panamera 4 V6 2.9L 2023>>
- Porsche 976 Panamera 4 E-Hybrid V6 2.9L 2023>>
- Porsche 976 Panamera 4S E-Hybrid V6 2.9L 2023>>
- Porsche 976 Panamera GTS V8 4.0L 2023>>
- Porsche 976 Panamera Turbo E-Hybrid V8 4.0L 2023>>
- Porsche 976 Panamera Turbo S E-Hybrid V8 4.0L 2023>>
Price: €618.93
Orderable - 45 to 60 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
9A781931600/1
Product Information
Symptoms Of Wear Or Failure:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9A781931600
The product you are viewing cross references to these numbers
Product Information
Heating Hose.Ensure consistent cabin warmth and efficient engine heat transfer with the OE MATCH Heating Hose. This OE MATCH hose is designed to transport heated coolant from the engine to the heater core, enabling proper HVAC performance and reliable interior heating.
Fits:
- Porsche 971.1 Panamera V6 3.0L 2WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 3.0L Turbocharged V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD (440 Hp) 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD (550 Hp) 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive 2017-20
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera GTS 4.0L V8 2021-23
- Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
Diagram Ref No 1
What This Product Does:
- Delivers heated coolant to the heater core
- Returns coolant back to the engine for continuous circulation
- Enables proper cabin heating performance
- Supports overall cooling system efficiency
Symptoms Of Wear Or Failure:
- Coolant leaks near the heater core or engine bay
- Sweet coolant smell inside or outside the vehicle
- Damp carpet or moisture inside the cabin (in some cases)
- Heater blowing cold or inconsistent warm air
- Low coolant warning light or frequent coolant top-offs
- Engine running hotter than normal
- Cracks, bulging, or swelling along the hose
- Soft, brittle, or spongy rubber texture
- Coolant residue around hose fittings or clamps
- Replacing a worn or damaged heating hose is important because it plays a critical role in both the cooling system and the cabin heating system. A failing hose can leak coolant, reducing circulation and causing the engine to run hotter than normal.
- If the hose ruptures or leaks severely, it may lead to coolant loss, overheating, and costly engine damage. It can also cause poor heater performance and may even allow coolant to enter the cabin area.
- Installing a new heating hose helps restore proper coolant flow, improves heating efficiency, prevents leaks, and protects the engine from overheating.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9A781931600
9A781931600
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 971.1 Panamera V6 3.0L 2WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 3.0L Turbocharged V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD (440 Hp) 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD (550 Hp) 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive 2017-20
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera GTS 4.0L V8 2021-23
- Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
Price: €159.82
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
91150504603/1KIT
Product Information
Fits:
Porsche 911 1974-89
Porsche 930 3.0L / 3.3L 1975-89
Diagram ref no 29, 30 , 31, 27, 26, 32, 33, 34, 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91150504603
The product you are viewing cross references to these numbers
Product Information
Rear bumper bracket tubes & fittings. SET OF 2Fits:
Porsche 911 1974-89
Porsche 930 3.0L / 3.3L 1975-89
Diagram ref no 29, 30 , 31, 27, 26, 32, 33, 34, 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91150504603
91150504603
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Rear bumper bracket tube. Porsche 911 1974-89 (91150504603/1)
2 x Front bumper base. Porsche 911 1974-89 (91150522001)
2 x Washer B 8,4 (90015100802)
2 x Cotter pin nut for wishbone ball joint front. Porsche 911 1969-89 / 914 1972-76 (90008400402/1)
2 x Reinforcement bar tube rubber ring. Porsche 911 1974-89 FRONT OR REAR (91150522100/1)
2 x Front bumper tube bow. Porsche 911 1974-89 (91150522300)
2 x Front bumper lock ring. Porsche 911 1978-89 (90002701503)
4 x Door hinge bolt. Porsche 911 74-89 / 964 / 993 (99909301008/1)
2 x Reinforcement bar tube gasket. Porsche 911 1974-89 (91150531100/1)
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €184.08
Orderable - 21 to 28 Days
94810593536KIT
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810593536KIT
The product you are viewing cross references to these numbers
Product Information
Porsche 957/958 Cayenne & 970 Panamera V8 Cam Cover Gasket Set - Complete Engine
The cam cover gasket set is a comprehensive engine sealing
kit designed to protect key areas of the cylinder head from oil leaks.
This set
includes:
- Cam
cover gasket x 2– Seals the connection between the cam (valve) cover and
the cylinder head to prevent oil seeping out.
- Spark
plug tube seals x 6 – Seal each spark plug well to keep engine oil out
of the plug wells and ensure consistent ignition performance.
- Throttle control element seal x 2 – Provides a reliable seal around the throttle control interface to prevent vacuum and oil leaks.
These components work together to keep your V8 engine
sealed, clean and running efficiently.
Fits:
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
Why These Seals Fail
Cam cover gaskets and associated seals are exposed to heat
cycles, oil pressure and engine vibration throughout their life. Over time,
this can cause:
- Hardening and cracking due to prolonged heat exposure
- Compression set or material breakdown with age and mileage
- Oil contamination that accelerates seal wear
- Loss of flexibility leading to poor sealing surfaces
On high-mile Porsche Cayenne and Panamera V8 engines, this degradation often results in leaking oil around the cam covers and into the spark plug wells.
Why You May Need a Replacement Set
If your Porsche 957/958 Cayenne V8 or 970.1/970.2 Panamera
V8 shows signs of oil seepage, poor idle, misfires or fouled spark plugs, worn
cam cover gaskets and spark plug tube seals are a common cause.
Oil leaks can
lead to:
- Engine bay oil accumulation
- Burning smells or smoke under load
- Spark plug fouling and ignition misfires
- Reduced engine efficiency and increased maintenance costs
Replacing the complete gasket set restores proper sealing, helps maintain engine performance and prevents secondary issues caused by oil intrusion.
Owners often replace the cam cover gasket set during routine maintenance or when performing spark plug or ignition coil service to save time and avoid repeat labour.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810593536KIT
94810593501
94810593702
94810593800
94810593601
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Engine valve cover gasket. Porsche 957 Cayenne 4.8L / 958 Cayenne 4.8L / 970 Panamera 4.8L (94810593501/1)
8 x Gasket for spark plug holes in valve cover. Porsche 957 Cayenne / 958 Cayenne / 970 Panamera (94810593702/1)
2 x Camshaft adjuster seal. Porsche 957 / 958 Cayenne / 970 Panamera V8 (94810593800/1)
1 x Engine valve cover gasket. Porsche 957 Cayenne 4.8L / 958 Cayenne 4.8L / 970 Panamera 4.8L (94810593601/1)
Vehicle Group
Vehicle Group
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
Price: €132.72
In Stock - 24 Hour Dispatch
91150504503/1KIT
Product Information
A front bumper impact/mount tube that bolts between the body and the bumper assembly, supporting the bumper and helping locate it at the correct distance from the bodywork. It fits either left or right side; two are required per car.
SET OF 2
Fits:
Porsche 911 1974 - 1989
Porsche 930 3.0L, 3.3L 1974 - 1989
Diagram ref no 23, 13, 17, 16, 18, 19, 21/22 , 20
This metal bracket tube supports and locates the front bumper at the correct distance from the body, forming part of the impact-bumper mounting system. It helps maintain bumper alignment, panel gaps, and structural stability under normal driving and minor impacts. By replacing damaged or corroded tubes, it restores proper bumper fitment and ensures the assembly is safely and securely mounted.
Over the years, the original tubes can suffer from corrosion, accident damage, or bending from improper towing or jacking. A weakened or distorted tube can cause poor bumper alignment, uneven gaps, rattles, or a loose-feeling bumper. In more serious cases, it may compromise the way the bumper mounts in a minor impact. Replacing it with a correctly made tube restores structural confidence and the clean, straight look of the front end.
Consider replacing the front bumper tube if:
• The existing tube is rusted, bent, or dented
• The front bumper sits crooked, too close, or too far from the body
• The car has had front-end damage or a bumper impact
• You’re carrying out a full restoration or repaint and want correct fitment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91150504503
The product you are viewing cross references to these numbers
Product Information
2 x Front bumper metal bracket tube / impact tube.A front bumper impact/mount tube that bolts between the body and the bumper assembly, supporting the bumper and helping locate it at the correct distance from the bodywork. It fits either left or right side; two are required per car.
SET OF 2
Fits:
Porsche 911 1974 - 1989
Porsche 930 3.0L, 3.3L 1974 - 1989
Diagram ref no 23, 13, 17, 16, 18, 19, 21/22 , 20
This metal bracket tube supports and locates the front bumper at the correct distance from the body, forming part of the impact-bumper mounting system. It helps maintain bumper alignment, panel gaps, and structural stability under normal driving and minor impacts. By replacing damaged or corroded tubes, it restores proper bumper fitment and ensures the assembly is safely and securely mounted.
Over the years, the original tubes can suffer from corrosion, accident damage, or bending from improper towing or jacking. A weakened or distorted tube can cause poor bumper alignment, uneven gaps, rattles, or a loose-feeling bumper. In more serious cases, it may compromise the way the bumper mounts in a minor impact. Replacing it with a correctly made tube restores structural confidence and the clean, straight look of the front end.
Consider replacing the front bumper tube if:
• The existing tube is rusted, bent, or dented
• The front bumper sits crooked, too close, or too far from the body
• The car has had front-end damage or a bumper impact
• You’re carrying out a full restoration or repaint and want correct fitment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91150504503
91150504503
91150504501
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Front bumper metal bracket tube. Porsche 911 1974-89 (91150504503/1)
2 x Reinforcement bar tube gasket. Porsche 911 1974-89 (91150531100/1)
2 x Front bumper base. Porsche 911 1974-89 (91150522001)
2 x Washer B 8,4 (90015100802)
2 x Cotter pin nut for wishbone ball joint front. Porsche 911 1969-89 / 914 1972-76 (90008400402/1)
2 x Reinforcement bar tube rubber ring. Porsche 911 1974-89 FRONT OR REAR (91150522100/1)
2 x Front bumper tube bow. Porsche 911 1974-89 (91150522300)
2 x Original Porsche Part (N0120093)
4 x Door hinge bolt. Porsche 911 74-89 / 964 / 993 (99909301008/1)
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €183.98
Orderable
94810593601KIT
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810593601KIT
The product you are viewing cross references to these numbers
Product Information
Porsche 957/958 Cayenne & 970 Panamera V8 Cam Cover Gasket Set - Cylinder 5-8
The cam cover gasket set is a comprehensive engine sealing
kit designed to protect key areas of the cylinder head from oil leaks.
This set
includes:
- Cam
cover gasket – Seals the connection between the cam (valve) cover and
the cylinder head to prevent oil seeping out.
- Spark
plug tube seals x 4 – Seal each spark plug well to keep engine oil out
of the plug wells and ensure consistent ignition performance.
- Throttle control element seal – Provides a reliable seal around the throttle control interface to prevent vacuum and oil leaks.
These components work together to keep your V8 engine
sealed, clean and running efficiently.
Fits:
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
Why These Seals Fail
Cam cover gaskets and associated seals are exposed to heat
cycles, oil pressure and engine vibration throughout their life. Over time,
this can cause:
- Hardening and cracking due to prolonged heat exposure
- Compression set or material breakdown with age and mileage
- Oil contamination that accelerates seal wear
- Loss of flexibility leading to poor sealing surfaces
On high-mile Porsche Cayenne and Panamera V8 engines, this degradation often results in leaking oil around the cam covers and into the spark plug wells.
Why You May Need a Replacement Set
If your Porsche 957/958 Cayenne V8 or 970.1/970.2 Panamera
V8 shows signs of oil seepage, poor idle, misfires or fouled spark plugs, worn
cam cover gaskets and spark plug tube seals are a common cause.
Oil leaks can
lead to:
- Engine bay oil accumulation
- Burning smells or smoke under load
- Spark plug fouling and ignition misfires
- Reduced engine efficiency and increased maintenance costs
Replacing the complete gasket set restores proper sealing, helps maintain engine performance and prevents secondary issues caused by oil intrusion.
Owners often replace the cam cover gasket set during routine maintenance or when performing spark plug or ignition coil service to save time and avoid repeat labour.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810593601KIT
94810593702
94810593800
94810593601
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Engine valve cover gasket. Porsche 957 Cayenne 4.8L / 958 Cayenne 4.8L / 970 Panamera 4.8L (94810593601/1)
4 x Gasket for spark plug holes in valve cover. Porsche 957 Cayenne / 958 Cayenne / 970 Panamera (94810593702/1)
1 x Camshaft adjuster seal. Porsche 957 / 958 Cayenne / 970 Panamera V8 (94810593800/1)
Vehicle Group
Vehicle Group
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
Price: €66.36
In Stock - 24 Hour Dispatch
94810593501KIT
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810593501KIT
The product you are viewing cross references to these numbers
Product Information
Porsche 957/958 Cayenne & 970 Panamera V8 Cam Cover Gasket Set
The cam cover gasket set is a comprehensive engine sealing
kit designed to protect key areas of the cylinder head from oil leaks.
This set
includes:
- Cam
cover gasket – Seals the connection between the cam (valve) cover and
the cylinder head to prevent oil seeping out.
- Spark
plug tube seals x 4 – Seal each spark plug well to keep engine oil out
of the plug wells and ensure consistent ignition performance.
- Throttle control element seal – Provides a reliable seal around the throttle control interface to prevent vacuum and oil leaks.
These components work together to keep your V8 engine
sealed, clean and running efficiently.
Fits:
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
Why These Seals Fail
Cam cover gaskets and associated seals are exposed to heat
cycles, oil pressure and engine vibration throughout their life. Over time,
this can cause:
- Hardening and cracking due to prolonged heat exposure
- Compression set or material breakdown with age and mileage
- Oil contamination that accelerates seal wear
- Loss of flexibility leading to poor sealing surfaces
On high-mile Porsche Cayenne and Panamera V8 engines, this degradation often results in leaking oil around the cam covers and into the spark plug wells.
Why You May Need a Replacement Set
If your Porsche 957/958 Cayenne V8 or 970.1/970.2 Panamera
V8 shows signs of oil seepage, poor idle, misfires or fouled spark plugs, worn
cam cover gaskets and spark plug tube seals are a common cause.
Oil leaks can
lead to:
- Engine bay oil accumulation
- Burning smells or smoke under load
- Spark plug fouling and ignition misfires
- Reduced engine efficiency and increased maintenance costs
Replacing the complete gasket set restores proper sealing, helps maintain engine performance and prevents secondary issues caused by oil intrusion.
Owners often replace the cam cover gasket set during routine maintenance or when performing spark plug or ignition coil service to save time and avoid repeat labour.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810593501KIT
94810593501
94810593702
94810593800
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Engine valve cover gasket. Porsche 957 Cayenne 4.8L / 958 Cayenne 4.8L / 970 Panamera 4.8L (94810593501/1)
4 x Gasket for spark plug holes in valve cover. Porsche 957 Cayenne / 958 Cayenne / 970 Panamera (94810593702/1)
1 x Camshaft adjuster seal. Porsche 957 / 958 Cayenne / 970 Panamera V8 (94810593800/1)
Vehicle Group
Vehicle Group
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
Price: €66.36
In Stock - 24 Hour Dispatch
.jpg){kind=link}
.jpg){kind=link}
99909301008/1x12
Product Information
The door hinge bolt secures the door hinge to the body pillar or door, enabling proper articulation and alignment. It plays a key role in maintaining consistent door function, preventing sag or misalignment, and ensuring panels close cleanly and securely.
SET OF 12, Six required per door and twelve per car.
Fits:
Porsche 911 1974 - 1989 incl. Turbo models
Porsche 964 1989 - 1994
Porsche 993 1995 - 1998
Diagram ref no 3
This OE Match door hinge bolt is manufactured to OE-equivalent standards using high-strength steel and corrosion-resistant surface treatment. It is engineered for proper engagement with the hinge and pillar threads, helping maintain correct door alignment and smooth hinge motion. Precise door fitment is essential for proper sealing, wind noise reduction, and panel gaps - all of which affect both appearance and vehicle comfort.
This bolt installs directly with no modification required and is suitable for individual replacement or during hinge service/adjustments.
A worn or corroded hinge bolt can lead to door sag, uneven panel gaps, increased wind noise, and difficulty closing the door correctly. A fresh OE Match door hinge bolt provides the necessary clamping force and fit precision to maintain door geometry, improve cabin sealing, and retain correct factory-style operation and feel.
When to replace:
• Noticeable door sag or misalignment
• Excessive play at the hinge
• Bolt corrosion or thread wear
• During door hinge servicing or hinge pin replacement
• Restoration or panel alignment work
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99909301008
The product you are viewing cross references to these numbers
Product Information
12 X Door hinge bolts, M 8 x 20. The door hinge bolt secures the door hinge to the body pillar or door, enabling proper articulation and alignment. It plays a key role in maintaining consistent door function, preventing sag or misalignment, and ensuring panels close cleanly and securely.
SET OF 12, Six required per door and twelve per car.
Fits:
Porsche 911 1974 - 1989 incl. Turbo models
Porsche 964 1989 - 1994
Porsche 993 1995 - 1998
Diagram ref no 3
This OE Match door hinge bolt is manufactured to OE-equivalent standards using high-strength steel and corrosion-resistant surface treatment. It is engineered for proper engagement with the hinge and pillar threads, helping maintain correct door alignment and smooth hinge motion. Precise door fitment is essential for proper sealing, wind noise reduction, and panel gaps - all of which affect both appearance and vehicle comfort.
This bolt installs directly with no modification required and is suitable for individual replacement or during hinge service/adjustments.
A worn or corroded hinge bolt can lead to door sag, uneven panel gaps, increased wind noise, and difficulty closing the door correctly. A fresh OE Match door hinge bolt provides the necessary clamping force and fit precision to maintain door geometry, improve cabin sealing, and retain correct factory-style operation and feel.
When to replace:
• Noticeable door sag or misalignment
• Excessive play at the hinge
• Bolt corrosion or thread wear
• During door hinge servicing or hinge pin replacement
• Restoration or panel alignment work
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99909301008
99909301002
99909301008
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
12 x Door hinge bolt. Porsche 911 74-89 / 964 / 993 (99909301008/1)
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Price: €41.88
Orderable - 21 to 28 Days
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information