OE Match

Flywheel with starter ring gear, Lightweight. Porsche 911 1965-68 / 914-6 70-76
6 Bolt type 215mm

Fits:
Porsche 911 2.0L 1965-69 (not for 912)
Note: early 911's might need to change the starter motor to later type (part number 901604102DX)

Porsche 914 1970-76 (6 cylinder only 914-6)

Lightweight Flywheel with starter ring for Porsche 911 65 - 69

The flywheel with starter ring is an important component in the drive system of a vehicle, including the Porsche 911 from 1965 to 1969. This component has a crucial function in starting the engine.

The flywheel is a round plate that is connected to the crankshaft bearing. It serves as a support for the starter ring, which in turn is connected to the vehicle's starter motor. The starter ring consists of a series of teeth or cams that allow it to mesh with the starter motor. When the driver turns the ignition key, the starter motor is activated and engages the starter ring to turn the crankshaft and start the engine.

The flywheel with starter ring for Porsche 911 from 1965 to 1969 is specially designed and manufactured for these model years. It is made of high quality material to ensure reliable performance and durability. The starter ring is precision manufactured to provide a secure and smooth connection with the starter motor.

When servicing or repairing the drive system of a 1965 to 1969 Porsche 911, it may be necessary to inspect or replace the flywheel with starter ring. Damage or signs of wear can impair the performance of the starter or lead to starting problems. In such cases, it is advisable to replace the defective component with a high-quality spare part to restore optimum engine function.

The flywheel with starter ring is an important element for the smooth starting of the engine of a Porsche 911 from 1965 to 1969. By regular maintenance and the use of high-quality spare parts, car owners can ensure the reliability of their vehicle and improve the driving experience.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110202602

The product you are viewing cross references to these numbers

Shock absorber Rear. Porsche 991.1 Carrera 2012-16

These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
Fits rear left or right side, Price is each Must be fitted in pairs 

Fits:
Porsche 911 (991) 3.4L Carrera / 3.8L Carrera S 12/2011-16
Porsche 911 (991) 3.4L Carrera / 3.8L Carrera S 12/2011-16

Replacement for cars with Electronic damper control for PASM and PDCC (I352)
PASM electronic damper control (I475)
PASM w/o lowering (I477)

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
•  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99133305324

The product you are viewing cross references to these numbers

Rear shock absorber strut for cars with PASM with or without air suspension.  Fits: Rear axle, fits both left and right sides.
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.

Part number: 971513035E Supersessions: This part number supersedes previous versions, including 971513035B, 971513035C, and 971513035D.

Fits:
Porsche 971.1 Panamera MKI 2017>>2020
Porsche 971.2 Panamera MKII 2021>>2023
Replacement for car with I475 With PASM

Diagram Ref No 1

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
•  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

971513035E

The product you are viewing cross references to these numbers

Rear Shock Absorber Full Assembly For PASM Cars. For Cars With And Without Air Suspension.
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
Sold Each. Fits Left And Right.

Fits:
Porsche 971.1 Panamera MKI 2017>>2020
Porsche 971.2 Panamera MKII 2021>>2023
Replacement for cars with I475 With PASM

Diagram Ref No 1, 2, 3 And 4

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
•  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

971513035E

The product you are viewing cross references to these numbers

These replacement REAR shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
Fits rear left or right side, Price is each 

Fits: Replacement for Cars with I475 PASM
Porsche Boxster 987 2005-08
Porsche Cayman 987C 2005-08
Cayman 2.9L 987C MKII 2009>>
Cayman S 3.4L 987C MKII 2009>>
Boxster 987 MKII 2.9L 2009-2012
Boxster S 987 MKII 3.4L 2009-2012

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
•  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98733305333

The product you are viewing cross references to these numbers

These replacement FRONT shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. Fits: left or right side, Price is each.  Must be installed in pairs 

Fits:
Porsche 987C.2 Cayman 2.9L 2009>>
Porsche 987C.2 Cayman S 3.4L 2009>>
Porsche 987.2 Boxster 2.9L 2009-2012
Porsche 987.2 Boxster S 3.4L 2009-2012
Replacement for Cars with PASM suspension I475



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98734304522

The product you are viewing cross references to these numbers

These replacement FRONT shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.

Fits:
Porsche 997.1 C4 / C4S Coupe/Cabrio MKI 2005>>2008
Porsche 997.2 C4 / C4S Coupe/Cabrio MKII 2009>>2012
Replacement for Cars With Option Codes:
475 - "PASM" Electronic Damper Control

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
•  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.       

Diagram Ref No 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99734304

The product you are viewing cross references to these numbers

These replacement REAR shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
Rear shock absorber full assembly for cars WITHOUT AIR SUSPENSION With PASM.

Fits:
Porsche Panamera MKI 970 2010-13
Replacement for I475 with PASM

Porsche Panamera MKII 970 2014-16
Replacement for  I475 with PASM

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
• Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97033304513

The product you are viewing cross references to these numbers

These replacement rear shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.  
Sold Each.  Fits Left And Right.

Fits:
Porsche 9YA Cayenne 2018>>2023
Replacement for cars with Suspension/Dampers PASM (Option Code: 1BH)

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
•  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

 
Diagram Ref No 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9Y0513031C

The product you are viewing cross references to these numbers

These replacement Rear shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
Fits rear left or right side, Price is each  Must be installed as a pair
Replacement for vehicles with electronic suspension control PASM

Fits:
Porsche 982 (718) Boxster 2017 - 2019
Replacement for cars with electronic suspension control; with PASM

Porsche 982 (718) Cayman 2017-19
Replacement for cars  with electronic suspension control; with PASM

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
•  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982513031C

The product you are viewing cross references to these numbers

These replacement FRONT shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.

Replacement for cars with PASM, with electronic suspension control ( option code: 475)
Replacement for cars with PASM without lowering (option code: 477)

Sold individually, Must be fitted as a pair 

Fits:

• Porsche Boxster 981 2.7L 2012-16
• Porsche Boxster S 981 3.4L 2012-16
• Porsche Boxster 718 2.0L Manual (300 Bhp)
• Porsche Boxster 718 2.0L PDK (300 Bhp)
• Porsche Boxster S 718 2.5L Manual (350 Bhp)
• Porsche Boxster S 718 2.5L PDK (350 Bhp)
• Porsche Boxster T 718 2.0L Manual (300 Bhp)
• Porsche Boxster T 718 2.0L PDK (300 Bhp)
• Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
• Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
• Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
• Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
• Porsche 991 Carrera 2 3.0L (370 Bhp)
• Porsche Cayman 2.7L 981 2013-16
• Porsche Cayman S 3.4L 981 2013-16
• Porsche Cayman 718 2.0L Manual (300Bhp)
• Porsche Cayman 718 2.0L PDK (300Bhp)
• Porsche Cayman S 718 2.5L Manual (350Bhp)
• Porsche Cayman S 718 2.5L PDK (350Bhp)
• Porsche Cayman T 718 2.0L Manual (300Bhp)
• Porsche Cayman T 718 2.0L PDK (300 Bhp)
• Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
• Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
• Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
• Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
  
  
• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
•  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982413031H

The product you are viewing cross references to these numbers

Control vent heater box. 
Sold each - 2 required per car

Fits:
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1969 to 1976

Can be used for Left or Right

Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91157134701

The product you are viewing cross references to these numbers

Shock Absorber, Rear Strut, Full Assembly. 

These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.

For Cars WITH Or WITHOUT Air Suspension.
Sold Each - Fits Left And Right.

Fits:
Porsche 95B.1 Macan MKI 2014>>2018
Cars With Option Codes:
1BH - Suspension/Dampers, Standard 2 PASM
1BK - Air Suspension With Levelling System And Height Adjustment (PASM)

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
• Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.       

Diagram 1 Ref No 2, 3, 4, 5
Diagram 2 Ref No 5, 6, 7, 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B513035K

The product you are viewing cross references to these numbers

Air con compressor.  

Fits:
Porsche 95B Macan 2.0l 

Diagram ref no 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAB816803A

The product you are viewing cross references to these numbers

Air con compressor. 

Fits:
Porsche 970 Panamera 3.6L 2010 - 2013
Porsche 970 Panamera 4.8L 2010 - 2013
For cars with Air conditioner (option code: 573) and 4-zone air conditioning system (option code: 576)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94812601103

The product you are viewing cross references to these numbers

Steering Rack. Porsche 991.1 LHD reconditioned exchange unit

Fits:
Porsche 991 2012-2016
Porsche 981 Boxster 2012-2016
Porsche 981 Cayman 2014-2016
- Right Hand Drive Cars (like UK)

Diagram ref no 1

We strongly recommend replacing the power steering pump at the same time as the steering rack. Swarf (metal particles) in the power steering system can circulate and cause damage to both components. If you choose to replace only the steering rack and, upon return of your exchange unit, we discover that the rack bar is scored or contaminated with swarf, this indicates that debris is present in the system. In such cases, we advise replacing the pump as well.
Please note: if we have advised that there is swarf in the system and you choose not to replace both components, any future warranty claims related to this issue will not be valid. 

The most common power steering faults are:
- Leaking power steering
- Torn Gators
- Hard to steering when idling
- Hard to steering one-way
- Steering-Wheel not self-centering
- Noise when Idling
- Noise when steering
- Judders when steering
- Loss of all power in steering
- Semi-Loss of power in steering
- Electric steering problems

Above are just some of the problems our customers are faced with on a day-to-day basis with their power steering units. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99134700518

The product you are viewing cross references to these numbers