Please wait…

Please wait while we process your order,
do not press the back button…

Brands >

OE Match

About OE Match

OE Match for Porsche

OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations

A Quick Look at OE Match

OE Match information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.

Choosing the Right Fit for Your Porsche

Where OE Match is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.

Often chosen when owners want OE-equivalent quality with sensible running costs, especially for routine service and wear items.
Typical reasons to replace include restoring reliability, addressing age-related wear, or refreshing multiple components during larger repair work.
Common defects from incorrect application include noise, premature wear, leaks, or fitment quirks if the wrong variant is selected or fitted with old seals/hardware.
Watch for symptoms such as unusual noises, early wear, or repeat failures after recent work, which can indicate mismatched parts or supporting items left worn.
Always cross-check OEM part numbers, read model-year notes, and verify compatibility before ordering.
For safety-critical components, confirm specification and fitment carefully and have installation checked by a competent technician.

Browse by Category

If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.

Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, longer stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.

Brake Pad Wear Sensors — Brake pad wear sensors are replaced when pads are renewed or when warning lights indicate a broken or worn sensor. Symptoms include brake wear warnings even with new pads, damaged sensor cables, or broken clips around the caliper area.

Engine Electrical — Engine electrical parts are changed when there are starting, charging, ignition, or sensor-related faults that affect drivability and reliability, such as intermittent no-start, misfires, rough idle, poor charging, warning lights or heat-soak failures.

Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected, often resolving hard starting, rough idle, poor fuel economy and warning lights caused by clogged filters or worn ignition components.

Service Kits — Service kits bundle key service components to simplify maintenance and set the car back to a known baseline, especially useful when catching up on overdue servicing or dealing with general sluggish running, inconsistent idle and reduced performance.

For brake parts, confirm whether items are OE-equivalent replacements or performance upgrades and check if new fitting kits and sensors are required.
On service items and kits, match the kit to your exact Porsche model, engine and year, and review what is included so you can add any extra “while you are there” parts.

Explore OE Match at Design911

View the current OE Match range for Porsche at Design911, then filter by model and category to narrow down to the right parts.

Breather Line. Porsche 970.2 Panamera 3.0L 2013-16

97010631061/1

Product Information

Breather Line.

The Breather Line is a OE MATCH coolant vent hose designed to connect the coolant expansion tank to the engine cooling system. This breather/vent line allows the cooling system to manage air and pressure changes while routing overflow coolant back into the closed-loop circuit. By supporting proper ventilation and fluid balance, it helps maintain stable engine operating temperatures and reliable cooling performance. It ensures precise fitment, durability, and resistance to heat and coolant exposure for Porsche Panamera (970) models.

Fits:

Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16

Diagram Ref No 11

What This Product Does:

Vents trapped air and pressure from the cooling circuit into the expansion tank.
Routes overflow coolant back to the coolant reservoir as temperatures rise.
Helps maintain proper coolant level and pressure balance in the closed-loop cooling system.
Supports stable coolant circulation, helping prevent air pockets that can reduce cooling efficiency.

Symptoms Of Wear Or Failure:

Cracks or loose connections can cause coolant seepage, staining, or dripping around the reservoir and hose joints.
A leaking breather line can slowly reduce coolant level, requiring frequent top-ups.
If the hose cannot vent properly, the system may build excess pressure or struggle to regulate pressure during heat cycles.
Low coolant warnings may appear if coolant loss occurs through the breather line.
A coolant smell in the engine bay often indicates leakage from the hose.
Common signs include cracking or splitting, hardened/brittle rubber, swollen hose sections, degraded fittings or connectors, coolant residue buildup.
Air entering the system or coolant loss may cause poor circulation, leading to unstable temperature readings.

Why Replacement Matters:

Prevents coolant leaks that lead to low coolant levels and reduced cooling performance.
Maintains proper venting, allowing the cooling system to release trapped air and manage pressure changes.
Helps avoid overheating, since coolant loss or air pockets can disrupt coolant circulation.
Protects cooling system components, as pressure imbalance can stress hoses, seals, and the expansion tank.
Restores reliable cooling system operation, ensuring overflow coolant is routed correctly back to the reservoir.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010631061

97010631061

97010631060

The product you are viewing cross references to these numbers

Coolant Hose, Return. Porsche 970.2 Panamera 3.0L 2013-16

97010650160/1

Product Information

Coolant Hose, Return.

The Coolant Hose, Return is a OE MATCH engine coolant return hose designed to carry coolant back through the cooling system loop on compatible Porsche Panamera (970) models. This flexible hose helps maintain proper coolant circulation and temperature regulation by directing coolant toward key cooling components for re-cooling or reservoir return. It offers precise fitment, high resistance to heat and pressure, and long-term durability.

Fits:

Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16

Diagram Ref No 46 (Diagram Ref No 47 Included, 48 Sold Separately)

What This Product Does:

Returns coolant from components such as the radiator, heater circuit, or other cooling lines back into the main cooling loop.
Helps maintain continuous coolant circulation, which is essential for stable engine temperature control.
Supports proper heat dissipation, allowing coolant to be re-cooled before recirculating through the engine.
Provides a flexible, heat-resistant connection that accommodates engine movement and thermal expansion.

Symptoms Of Wear Or Failure:

Coolant may seep or drip from the hose body or at the connection points, often leaving wet staining or dried residue.
A leaking return hose can cause gradual coolant loss, requiring frequent top-ups.
Coolant loss or restricted flow can reduce cooling efficiency and cause overheating or fluctuating temperature readings.
A sweet odor in the engine bay is a common sign of a coolant leak.
Common signs include cracking or splitting, swelling or bulging, hardened or brittle rubber, soft spots, coolant staining around the hose.
If coolant circulation is disrupted, the heater core may not receive proper coolant flow.
Low coolant or temperature warning messages may appear as the hose begins to fail.

Why Replacement Matters:

Prevents coolant leaks that lead to low coolant levels and loss of cooling system pressure.
Helps avoid engine overheating, which can cause serious and expensive engine damage.
Restores proper coolant circulation, ensuring efficient cooling performance under all driving conditions.
Maintains stable heater performance, since the heater system depends on continuous coolant flow.
Protects surrounding components, as leaking coolant can damage sensors, wiring, seals, and nearby engine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010650160

97010650160

The product you are viewing cross references to these numbers

Control arms top Rear fitting kit Porsche 996 / 997

99733104701/BOLTS

Product Information

Control arms top Rear FITTING KIT

Bolt & nuts for (4) upper control arms. will fit OE Refs: 99733104701, 99733104701, 99733104700, 99633114705, 99633114706, 99633114703, 99633114702, 99633104702, 99633104705, 99633104706,

oematch

Fits:
Porsche 996 C2/C4/C4S 1998-2005
Porsche 996 TURBO/GT3
Porsche 997 MKI 2006-2009
Porsche 997 TURBO/GT3

Please click 'Zoom in' to view the diagram.
Diagram ref no. 9, 10, 11, 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99733104701

99733104701

99733104700

99633114705

99633114706

99633114703

99633114702

99633104702

99633104705

99633104706

The product you are viewing cross references to these numbers

Control arms top Rear & bolts (SET OF 4) Porsche 996 / 997

99733104701/3KIT

Product Information

Control arms top Rear with nuts & bolts (SET OF 4 ARMS)

oematch

Fits:
Porsche 996 C2/C4/C4S 1998-2005
Porsche 996 TURBO/GT3
Porsche 997 MKI 2006-2009
Porsche 997 TURBO/GT3

Please click 'Zoom in' to view the diagram.
Diagram ref no. 8 , 9, 10, 11, 12

This product supersedes Porsche's old part numbers:
- 99633104702
- 99633104703
- 99633104705
- 99633104706
- 99733104700

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99733104701

99733104701

99733104700

99633114705

99633114706

99633114703

99633114702

99633104702

99633104705

99633104706

The product you are viewing cross references to these numbers

Coolant Pipe. Porsche 970 Panamera 2010-16

97010604400/1

Product Information

Coolant Pipe.
The Coolant Pipe is a OE MATCH cooling system component designed to route engine coolant within the closed-loop cooling circuit. This rigid coolant pipe directs overflow and circulating coolant between key cooling system components, including the engine and expansion reservoir, helping maintain proper pressure balance and stable engine operating temperatures. It provides precise fitment, high resistance to heat and pressure, and long-term durability for Porsche Panamera (970) models.

Fits:

Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
Porsche 970.1 Panamera S V8 4.8L 2009-13
Porsche 970.1 Panamera 4S V8 4.8L 2009-13
Porsche 970.1 Panamera GTS V8 4.8L 2011-13
Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16

Diagram Ref No 14

What This Product Does:

Transfers engine coolant through the cooling circuit, helping move heat away from the engine.
Routes overflow or return coolant back toward the expansion/reservoir tank as part of the closed-loop system.
Helps maintain proper cooling system pressure and balance during temperature changes.
Provides a secure, rigid connection between cooling components to ensure reliable coolant flow.

Symptoms Of Wear Or Failure:

Coolant may drip or seep from the pipe body, joints, or connection points, often leaving visible residue or staining.
A leaking coolant pipe can cause gradual coolant loss, requiring frequent top-ups.
Loss of coolant or pressure imbalance can reduce cooling efficiency and cause temperature instability.
A noticeable coolant odor in the engine bay often indicates leakage from the cooling system.
Signs may include cracked plastic sections, corrosion on metal pipe sections, damaged or worn sealing areas, loose or degraded connection points.
Low coolant or overheating warnings may appear if the pipe begins to fail.

Why Replacement Matters:

Prevents coolant leaks that can lead to low coolant levels and reduced system pressure.
Helps avoid engine overheating, which can result in serious and costly engine damage.
Restores proper coolant routing, ensuring efficient heat transfer throughout the cooling circuit.
Maintains cooling system integrity, preventing air intrusion and pressure imbalance.
Protects surrounding components, as leaking coolant can damage hoses, wiring, sensors, and engine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010604400

97010604400

The product you are viewing cross references to these numbers

4 4 4 4

Damper swivel pin & clips SET OF 4. Porsche 911 1965-76

90008701102/1KIT

Product Information

Damper swivel pin & clips SET OF 4.
damper swivel pin (or retaining pin) designed for mounting gas struts or dampers on the front bonnet or engine lid of the Porsche 911. secures the ball-joint or swivel bracket of the strut/damper in place, allowing controlled movement while ensuring the strut remains fastened under load. This is exact reproduction.

Fits:
Porsche 911 1965-1968 2.0L / 912 SWB (F)
Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC

Diagram ref no 4 & 5

This pin is inserted through the mounting bracket of the gas strut or damper and into the mounting point on the lid or hinge assembly. A circlip or cotter pin keeps it in place, allowing the strut to pivot correctly while ensuring secure retention. Without a solid pin, the strut could become loose or detached, compromising lid safety and function.

Over time, the pin can become corroded, bent, worn, or lost due to repeated strut motion, environmental exposure (moisture, road spray), and age. A compromised pin may lead to:
•  The gas strut mounting becoming loose or detached
•  Lid or bonnet not staying open reliably or dropping unexpectedly
•  Increased wear on the strut bracket or hinge due to improper pivoting

Replace when:
• The original pin appears rusted, bent, or its retaining clip is missing
• You’re replacing or servicing the gas strut/damper on the bonnet or engine lid
• You’re restoring the bodywork or hinge/strut assembly and want correct, safe hardware

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90008701102

99916604302

99908700302

90008701102

90135195510

The product you are viewing cross references to these numbers

Spring washer B 14,2, Seat belt mounting. Porsche 987 Boxster / 987 Cayman / 997 / 991

99902802201/1

Product Information

Spring washer B 14,2 - Seat belt mounting, Front.
This spring washer is designed to be installed under a bolt or nut where the seatbelt mounting hardware interfaces with the vehicle structure on cars equipped with sport/bucket seats.
Sold individually

Fits:
For cars with Sport backet seat (PR: 388, 389), Carrera GT bucket seat (PR: 384, 385)
Porsche 987.1 Boxster 2008 >>
Porsche 987.2 Boxster 2009 - 2012

Porsche 987C.1 Cayman 2008 >>
Porsche 987C.2 Cayman 2009 - 2012

Porsche 997.1 Carrera 2008 >>
Porsche 997.2 Carrera 2009 - 2012
Porsche 997.1 Turbo 2008 >>
Porsche 997.2 Turbo 2010 - 2013
Porsche 997 GT3 >>2008

Porsche 991 Turbo 2017 >>
Porsche 991 GT3 2014 - 2021

Diagram ref no 9

This washer is used in seat belt mounting assemblies on Porsche models fitted with sport or Carrera GT bucket seats (Option Codes: 388 – Sport Bucket Seat Left, 389 – Sport Bucket Seat Right, 384 - Carrera GT Bucket Seat Left, 385 - Carrera GT Bucket Seat Right).

Fitment / Position on Car
• Installed on: Seat belt anchor/bolt interface
• Location: Where the seat belt or harness mounting bolts secure into the body or seat structure
• Required per belt mount: Typically 1 washer per bolt (quantity varies by seat/belt configuration)

It helps maintain correct bolt tension, resist loosening, and preserve structural integrity where dynamic loads and vibration are present - contributing to secure seat belt anchorage on performance-oriented Porsche models.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99902802201

99902802101

99902802201

The product you are viewing cross references to these numbers

Heating Hose, Return. Porsche 970.2 Panamera 3.0L 2013-16

97010642160/1

Product Information

Heating Hose, Return.

The Heating Hose, Return is a OE MATCH heater coolant hose designed to return coolant from the heater core back into the engine cooling system. This hose forms a vital part of the HVAC heating circuit, ensuring continuous coolant circulation for consistent cabin heating and stable engine temperature control. It provides precise fitment, excellent resistance to heat and pressure, and long-term durability for Porsche Panamera (970) models.

Fits:

Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16

Diagram Ref No 23 (Diagram Ref No 17 Included)

What This Product Does:

Returns heated coolant from the heater core to the engine cooling system.
Completes the heater circuit loop, allowing coolant to continuously circulate.
Helps maintain stable engine operating temperatures by integrating the heater system into the overall cooling loop.
Provides a flexible, heat-resistant connection that accommodates engine movement and thermal expansion without restricting coolant flow.

Symptoms Of Wear Or Failure:

Coolant may drip or seep from the hose body or at the connection points, often leaving visible residue.
A leaking return hose can cause gradual coolant loss, requiring frequent top-ups.
Coolant loss from the heater circuit can reduce overall cooling system efficiency and lead to overheating.
If coolant circulation is restricted, the heater core may not function properly, reducing heating performance.
A noticeable coolant odor in the engine bay or inside the cabin may indicate a leak in the heater return line.
Common signs include cracking or splitting, bulging or swelling, hardened or brittle rubber, coolant staining or residue buildup.
Low coolant or overheating warnings may appear if the hose begins to fail.

Why Replacement Matters:

Prevents coolant leaks that can lead to low coolant levels and loss of system pressure.
Maintains consistent cabin heating, as proper coolant return flow is required for the heater core to function efficiently.
Helps avoid engine overheating, since coolant loss or restricted flow reduces cooling performance.
Restores balanced coolant circulation, ensuring stable engine operating temperatures.
Protects nearby components, as leaking coolant can damage hoses, wiring, sensors, and engine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010642160

97010642160

The product you are viewing cross references to these numbers

Heater Hose, Supply. Porsche 970 Panamera 2010-16

97057258400/1

Product Information

Heater Hose, Supply.
The Heater Hose, Supply is a OE MATCH heater coolant hose designed to deliver hot engine coolant from the cooling system to the heater core. This hose plays a vital role in the HVAC heating circuit, ensuring consistent coolant flow for reliable cabin heating and stable engine temperature control. It provides precise fitment, excellent resistance to heat and pressure, and long-term durability for Porsche Panamera (970) models.

Fits:

Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
Porsche 970.1 Panamera S V8 4.8L 2009-13
Porsche 970.1 Panamera 4S V8 4.8L 2009-13
Porsche 970.1 Panamera GTS V8 4.8L 2011-13
Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
Porsche 970.2 Panamera Turbo V8 Executive 2014-16
Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16

Diagram Ref No 6

What This Product Does:

Supplies hot engine coolant from the cooling system to the heater core.
Enables cabin heating, since the heater core uses hot coolant to warm the air inside the vehicle.
Helps maintain proper coolant circulation through the heater circuit for consistent heating performance.
Provides a flexible, heat-resistant connection that handles vibration and thermal expansion without restricting coolant flow.

Symptoms Of Wear Or Failure:

Coolant may seep or drip from the hose body or at the clamp connections, often leaving visible residue.
A leaking heater supply hose can cause gradual coolant loss, requiring frequent top-ups.
If hot coolant cannot reach the heater core properly, the heater may blow lukewarm or cold air.
Coolant loss from the heater circuit can reduce overall cooling system efficiency.
A noticeable coolant odor in the engine bay or cabin can indicate a leak in the heater hose.
Common signs include cracking or splitting, swelling or bulging, hardened or brittle rubber, coolant staining around the hose.
Low coolant or temperature warnings may appear if the hose begins to fail.

Why Replacement Matters:

Prevents coolant leaks that can lead to low coolant levels and pressure loss.
Maintains reliable cabin heating, since the heater core depends on a steady supply of hot coolant.
Helps avoid engine overheating, as coolant loss reduces overall cooling system efficiency.
Restores proper coolant circulation, ensuring stable engine temperature control.
Protects surrounding components, since leaking coolant can damage wiring, sensors, and nearby engine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97057258400

97057258400

The product you are viewing cross references to these numbers

Heating Hose, Return. Porsche 970 Panamera 2010-16

97057258600/1

Product Information

Heating Hose, Return.

The Heating Hose, Return is a OE MATCH heater coolant hose designed to return coolant from the heater core circuit back into the engine cooling system. This return hose is essential for maintaining continuous coolant circulation through the HVAC heating system, ensuring reliable cabin heat and stable engine temperature control. It provides precise fitment, strong resistance to heat and pressure, and long-term durability for Porsche Panamera (970) models.

Fits:

Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
Porsche 970.1 Panamera S V8 4.8L 2009-13
Porsche 970.1 Panamera 4S V8 4.8L 2009-13
Porsche 970.1 Panamera GTS V8 4.8L 2011-13
Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
Porsche 970.2 Panamera Turbo V8 Executive 2014-16
Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16

Diagram Ref No 11

What This Product Does:

Returns heated coolant from the heater core to the engine cooling system.
Completes the heater circuit loop, allowing coolant to continuously circulate through the HVAC system.
Helps maintain stable engine operating temperatures by integrating the heater system into the overall cooling loop.
Provides a flexible connection that absorbs engine movement and thermal expansion without restricting coolant flow.

Symptoms Of Wear Or Failure:

Coolant may seep or drip from the hose body or around the connection points/clamps.
A leaking return hose can cause gradual coolant loss, leading to frequent topping up.
Coolant loss from the heater circuit can reduce overall cooling efficiency and contribute to overheating.
If coolant flow is reduced, the heater core may not circulate coolant properly, causing poor heating performance.
A sweet coolant odor in the engine bay or cabin can indicate a leak in the heater circuit.
Common signs include cracking or splitting, swelling or bulging, hardened or brittle rubber, coolant staining or residue.
Low coolant warnings may appear if the hose begins to leak.

Why Replacement Matters:

Prevents coolant leaks that can lead to low coolant levels and pressure loss.
Maintains reliable cabin heating, since the heater system requires continuous coolant flow in both supply and return lines.
Helps avoid engine overheating, because coolant loss reduces cooling system efficiency.
Restores correct coolant circulation, ensuring stable engine temperature control.
Protects surrounding components, as leaking coolant can damage wiring, sensors, hoses, and nearby engine parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97057258600

97057258600

The product you are viewing cross references to these numbers

Gearbox support bearing bracket Hexagon-Head Bolt Washer. Porsche 964 C4 / 993 C4 / 993 C4S / 993 Turbo MANUAL

90002500703/2::1

Product Information

Gearbox Support Bearing Bracket Hexagon-Head Bolt. A8.4
This OE Match washer serves as a bearing surface beneath the head of the hexagon bolt that clamps the gearbox support bearing bracket to the chassis or subframe.
Sold individually

Fits:
Porsche 964 C4 1989 - 1994 MANUAL (Gearbox type G64.00 / G64.01 / G64.02)
Porsche 993 C4 / C4S 1995 - 1998 MANUAL (Gearbox type G64.20 / G64.21)
Porsche 993 TURBO 1995 - 1998 MANUAL (Gearbox type G64.51 / G64.52)

Diagram Ref No 12

The gearbox support washer provides a stable bearing surface for the hexagon-head bolt, ensuring even distribution of clamping force to the gearbox support bearing bracket. Proper load distribution helps maintain consistent torque retention and prevents localized stress that can lead to fatigue or component deformation.

• Load distribution: Spreads clamping force from the gearbox support bolt to prevent localized stress on the bracket surface.
• Vibration resistance: Helps maintain bolt preload under road vibration and drivetrain movement.
• Installed on: Gearbox support bearing bracket assembly
• Quantity required: Typically 1 washer per gearbox support bolt (verify per model and service manual)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90002500703

90002500703

90002500702

The product you are viewing cross references to these numbers

Gearbox bracket support Hexagon-head bolt washer. Porsche 993 C2 TIPTRONIC

90002500703/2::2

Product Information

Gearbox bracket support Hexagon-head bolt washer, A 8.4
OE Match replacement Hexagon-Head bolt washer designed for use with the gearbox/bracket support on Porsche 993 Carrera 2 (C2) models equipped with the Tiptronic automatic transmission. It provides proper load distribution under fastener heads in the transmission support area, ensuring secure mounting and stable drivetrain alignment.
Sold individually

Fits:
Porsche 993 C2 1994 - 1998 TIPTRONIC (Gearbox type A50.04 / A50.05)

Diagram ref no 16

This washer is ideal for service during gearbox mount repairs, bracket replacement, or when refreshing transmission support hardware on 993 C2 Tiptronic vehicles. It installs directly under the head of the corresponding hexagon-head bolt, improving clamping integrity and helping preserve correct transmission position.

The gearbox bracket support washer provides a stable bearing surface for the hexagon-head bolt, distributing clamping force evenly and protecting mounting surfaces from deformation. This helps maintain proper torque and supports reliable mounting of the gearbox support bracket.

Function
• Distributes clamp load under gearbox bracket hex bolt
• Protects bracket and chassis surfaces from fastener stress
• Helps maintain correct transmission support alignment

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90002500703

90002500703

90002500702

The product you are viewing cross references to these numbers

Radiator oil cooler rubber mount washer. Porsche 911 1980>>

90002500703/2::3

Product Information

Radiator oil cooler rubber mount washer 8,4.
This washer installs easily under the head of the appropriate fastener and is ideal for use during cooler service, radiator/oil cooler removal, or when replacing corroded or worn mounting hardware.
Sold individually

Fits:
Porsche 911 1980 >>

Diagram Ref No 13C

This OE Match washer provides the proper interface between the fastener head and the mounting surface, helping to preserve mounting integrity while preventing pull-through or surface damage.

The radiator/oil cooler mount washer provides a stable bearing surface for mounting fasteners. It helps distribute compression load evenly, protects softer materials from indentation, and ensures that radiator and oil cooler brackets stay correctly aligned and securely attached under dynamic driving conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90002500703

90002500703

90002500702

The product you are viewing cross references to these numbers

4 4 4 4

Control arm lower hex nut. Porsche 986 Boxster

PAF103353/1::2

Product Information

Hexagon nut for Rear control arm lower, M 14 x 1.5
OE Match replacement control arm lower hex nut engineered to secure the lower control arm to the chassis or subframe on Porsche 986 Boxster models.
Sold individually

Fits:
Porsche 986 Boxster 1997 - 2004 REAR

Diagram ref no 11.

The control arm lower hex nut secures the lower control arm to its mounting point on the chassis/subframe. A tight, correctly torqued nut is essential for maintaining the integrity of the suspension system, ensuring stable handling, predictable steering, and safe ride quality.

Function
•  Secures the lower control arm mounting
•  Maintains correct suspension alignment and geometry
•  Resists loosening under vibration and dynamic loads

Control arm mounting hardware supports critical suspension links. A worn, corroded, or loose hex nut can compromise clamping force, leading to alignment drift, uneven tyre wear, and unpredictable handling. Replacing suspect hardware with an OE Match control arm lower hex nut restores proper clamping integrity and helps preserve suspension performance and driving confidence.

When to replace:
• During lower control arm removal or replacement
• Corrosion or visible thread damage on the original nut
• After suspension noise, looseness, or handling irregularity
• Following alignment adjustments or suspension upgrades
• As part of preventative maintenance on higher-mileage Boxsters

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF103353

90038001201

PAF912799

PAF103353

The product you are viewing cross references to these numbers

Vent Hose. Porsche 970.2 Panamera 3.0L 2013-16

97010642260/1

Product Information

Vent Hose.
The Vent Hose is a OE MATCH coolant vent/overflow hose designed to route coolant vapours and excess pressure within the engine cooling system. This connector hose helps maintain correct cooling system balance by directing overflow coolant back to the reservoir, supporting stable coolant circulation and consistent engine temperature control. It provides precise fitment, durability, and long-term resistance to heat and coolant exposure for Porsche Panamera (970) models.

Fits:

Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16

Diagram Ref No 19

What This Product Does:

Routes coolant vapours and excess coolant back toward the coolant expansion/reservoir tank.
Helps maintain proper cooling system pressure balance during engine heating and cooling cycles.
Supports stable coolant circulation, helping prevent air pockets and pressure build-up.
Keeps the cooling system operating as a sealed, controlled loop to protect against coolant loss.

Symptoms Of Wear Or Failure:

Coolant may seep from cracks or loose connections, leaving dried residue or wet staining around the hose.
A leaking vent hose can cause gradual coolant loss, requiring frequent top-ups.
Improper venting may cause unstable system pressure, contributing to overheating or erratic temperature readings.
A noticeable coolant smell in the engine bay often indicates leakage from the vent/overflow line.
Common signs include cracking or splitting, brittle or hardened rubber, loose or damaged fittings, discoloration from coolant exposure.
Low coolant or temperature-related warnings may appear if the hose begins to fail.

Why Replacement Matters:

Prevents coolant leaks that can lead to low coolant levels and reduced cooling efficiency.
Maintains correct pressure balance within the cooling system during temperature changes.
Helps prevent overheating, since coolant loss or trapped air can disrupt proper circulation.
Protects surrounding components, as leaking coolant can damage hoses, sensors, wiring, and nearby engine parts.
Restores reliable cooling system operation, ensuring overflow coolant is routed correctly back to the reservoir.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010642260

97010642260

The product you are viewing cross references to these numbers

Front bumper washer. Porsche 911 1984-89

90002500703/2

Product Information

Front bumper washer.
OE Match front bumper washer for Porsche 911 (1984–1989), direct-fit replacement hardware that supports proper bumper fastener load distribution and secure exterior trim mounting.
Sold individually

Fits:
Porsche 911 1984 - 1989
Porsche 930 3.3L 1984 - 1989

Diagram ref no 22.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90002500703

90002500703

90002500702

The product you are viewing cross references to these numbers

DISPLAYING 241 to 256 (of 7378 products)

<< 15 16 17 18 >>

Enter your VAT number here and click Verify:

OE Match

OE Match