OE Match

Stabilizer Bar Bush LOWER.



Fits:
Porsche 970 Panamera / S 2010-13
Porsche 970 Panamera GTS 2013

For cars with:
* I029 - Standard Chassis
* I350 - Air Suspension
* I475 - "PASM' electronic damper control

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97034379305

The product you are viewing cross references to these numbers

Stabilizer Bar Bush UPPER.

Fits:
Porsche 970 Panamera / S 2010-13 
Porsche 970 Panamera GTS 2013

For cars with:
* I029 - Standard Chassis
* I350 - Air Suspension
* I475 - "PASM' electronic damper control

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97034379205

The product you are viewing cross references to these numbers

Stabilizer bar bush, Front.
Sold in halves.



Fits:
Porsche 970.2 Panamera / S / Turbo 2014-16
Porsche 970.2 Panamera Diesel 2014>>
Porsche 970.2 Panamera Hybrid 2014>>
Option codes:
(029) Cars with standard suspension
(350) Cars with air suspension
(354) Cars with air suspension and PASM Comfort
(475) Cars with PASM electronic damper control

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97034379400

The product you are viewing cross references to these numbers

Coolant Expansion Tank.

Fits:
Porsche 970 Panamera MKI
Porsche 970 Panamera MKII

Every car has its weak points one of the items to keep an eye on is the coolant recovery tank. Over time it becomes brittle and has a tendency to crack and leak coolant. A simple preventative measure is to replace your tank with a genuine Porsche recovery tank.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97010615103

The product you are viewing cross references to these numbers

Radiator / Engine cooling fan, 400 W, without carrier.
This radiator cooling fan is a direct-fit replacement for the factory 400 W electric fan used on Porsche 992 (992.1 series) models. Designed for precision cooling performance, this fan operates within the original geometry, connector layout, and mounting interface. It helps regulate engine temperature by drawing airflow through the radiator during low-speed or high-load conditions.

Fits:
Porsche 992.1 Carrera 2019>>

PLEASE NOTE: Radiator fan bracket has to be transferred over to new fan or sourced separately. Not included with this fan.
Porsche part number 992121435.

Diagram ref no 2

•  Power: Rating 400 W
•  Function: Draws air through the radiator to maintain optimal coolant and engine temperature
•  Position: Front radiator section, left or right depending on configuration
•  Symptoms of wear: Overheating at low speed, fan noise, intermittent operation
•  Benefits: OEM-quality airflow and cooling, quiet and efficient motor, plug-and-play installation
•  Installation: Direct-fit; reuse original fan carrier or shroud as required

Over time, radiator fans are exposed to heat, vibration, and moisture, which can cause gradual wear of the motor bearings, electrical windings, or blade balance. A weakened or failing cooling fan can no longer move enough air through the radiators, leading to higher operating temperatures — especially noticeable in traffic or hot weather.

Replace your cooling fan when you notice:
• Rising coolant temperature at idle or low speeds
• Intermittent or noisy fan operation (grinding or humming sounds)
• Fan not engaging even when the engine is hot
• Fault codes or warning messages related to cooling system performance.

It’s also good practice to install a new fan during radiator or condenser replacement, or whenever there’s evidence of electrical faults, motor burnout, or impact damage to the blades or shroud.

Replacing with an replacement restores consistent cooling performance, protects the engine from overheating, and ensures the fan system operates quietly and efficiently — just as Porsche intended.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992959447H

The product you are viewing cross references to these numbers

Radiator cooling fan, 600 W.
This radiator cooling fan 600 W is a direct-fit replacement for the front cooling module on Porsche 991.2, 982 Boxster S and 982C Cayman S models. It provides the airflow needed to keep coolant temperatures under control in traffic, hot weather and spirited driving.

Fits:
Porsche 991.2 Carrera 2017 - 2019
Porsche 991.2 Turbo 3.8L 16.11.2018 - 2020 (Engine code: DHNA)
Porsche 991.2 4.0L GT3 / GT3 RS / Speedster 01.04.2017 >> (Engine codes: DGGA, DGGB, DNS, DSD)
Porsche 982 (718) Boxster S 2017 >>
Porsche 982C (718) Cayman S 2017 >>

Diagram ref no 2

Please note: Before ordering, please check the part number in the vehicle.

It’s ideal as a cost-effective replacement when the factory fan has become noisy, weak, or failed completely.

Function:
• Draws air through the radiator and condenser to assist engine cooling
• Supports stable coolant temperatures at idle, low speeds and high load
• Integrates with the vehicle’s fan control strategy for staged or variable-speed operation.

Over time, cooling fans are subjected to heat, vibration and moisture, which can wear motor bearings, damage windings or throw the fan out of balance. A weak or failing fan can’t move enough air, causing rising coolant temperatures, especially in slow traffic or on hot days. Replacing it with a properly spec’d OE-Match unit restores consistent cooling performance and helps protect the engine from overheating.

When to Replace:
• Coolant temperature climbs at idle or in traffic
• Fan runs noisily (grinding, humming or excessive vibration)
• Fan fails to start even when the engine is hot
• Intermittent fan operation or related fault codes
• Radiator/condenser replacement where the old fan shows wear or damage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1959455CY

The product you are viewing cross references to these numbers

Heater valve elbow. 
Sold each, two required per car

Fits:
Porsche 356C - 1963 to 1965

Heater valve elbow finished in stove enamelled gloss black.

Diagram ref no 61

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450128901

The product you are viewing cross references to these numbers

Point contact breaker.



Fits:
Porsche 911 - 1977 to 1979
Porsche 914 - 1973 to 1976

For Engine Codes
924 - XJ and XK
914 - GA and GB (2.0ltr, 4 Cyl)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92360292100

The product you are viewing cross references to these numbers

Shock absorber stop plate. FRONT axle


Fits:
Porsche 987 Boxster 2005-08 UPPER stop plate
Porsche 987 Boxster 2009-12 UPPER stop plate
Porsche 987C Cayman 2005-08 LOWER stop plate ( for cars with PASM)
Porsche 987C Cayman 2009-13 UPPER stop plate ( for cars with PASM)
Porsche 997.1 C2 / C2S COUPE 2005-08 LOWER stop plate (for cars with PASM)
Porsche 997.1 C4 / C4S 2005-08
Porsche 997.1 C2 / C2S 2005-08 LOWER stop plate (for cars with standard chassis / for cars with PASM)
Porsche 997 Turbo 2007-09 LOWER stop plate
Porsche 997 Turbo 2010-13 LOWER stop plate

Price is for each.

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99734310701

The product you are viewing cross references to these numbers

Rear suspension spring plate.


Porsche 964 Carrera RS 1991-93 

NOTE: This product can also be fitted to Carrera 2, Carrera 4, or Turbo models as an upgrade. They are a direct plug and play, so long as you purchase the larger eccentric nuts fitted to Carrera RS models. You'll be prompted to do so when adding these spring plates to your basket. 

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9643310

The product you are viewing cross references to these numbers

Headlamp rim primered.



Fits:
Porsche 911 - 1975 to 1986

Also know as a "Sugar Scoop" headlamp rim

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163113500

The product you are viewing cross references to these numbers

Headlamp rim chrome. 



Fits:
Porsche 911 - 1965 to 1975

Also know as a "Sugar Scoop" headlamp rim

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163110205

The product you are viewing cross references to these numbers

Sunroof clutch.

Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 993 1994-98

Diagram ref no 29.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91162410301

The product you are viewing cross references to these numbers

Cylindrical roller bearing, 20 × 47 × 14 mm
This OE-Match cylindrical roller bearing is manufactured to Porsche’s original specifications, offering a precise, direct-fit replacement for the factory-installed part.

Fits:
Porsche 911 Carrera (1987 to 1989) * with transmission code G50.00/01/50
Porsche 964 Carrera 2/4 (1989 to 1994)

Diagram ref no 25

•  Used in Porsche 911 and 964 models, typically within the gear housing / transmission pinion case as a main roller bearing in the gearbox or pinion casing.
•  Positioned on the main shaft / pinion assembly, between casing and rotating elements to carry load and maintain rotation integrity.

What Cylindrical roller bearing does:
•  Supports and allows smooth rotation of a shaft under load by reducing friction and handling radial forces
•  Maintains alignment, stability, and precision operation of gears and shafts in the drivetrain or gearbox assembly
•  Keeps components running quietly and reliably by providing a durable rolling interface

A worn bearing can cause play, noise, or gear misalignment, and in severe cases, lead to transmission failure. Replacing bearing restores the correct fit and load capacity, preventing further wear to surrounding parts. This ensures long-lasting gearbox durability, reduced vibration, and smooth, reliable performance under stress.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99911014400

The product you are viewing cross references to these numbers

Insert headlamp Amber for cars WITHOUT WASHER jets.
For RHD (Right Hand Drive) and LHD (Left Hand Drive) Cars.
Sold each.

This insert headlamp is high-quality replacement designed to OE specifications - it provides the same fit, clarity, and performance as original Porsche product.

Fits:

• Porsche 996 C2 / C4 1997 - 2001
• Porsche 986 Boxster 1997 - 2004

Diagram ref no 19




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99663103

The product you are viewing cross references to these numbers

Insert headlamp Amber for cars WITH WASHER jets.
RHD and LHD Cars

Fits:

• Porsche 996 C2 / C4 >>2001
• Porsche 986 Boxster 1997-02

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99663103

The product you are viewing cross references to these numbers