OE Match

Battery restraining strap.

Fits:
Porsche 912 1965-69

Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90261102200

The product you are viewing cross references to these numbers

Extended hub padded leather steering wheel 380mm Carrera RS style. 
30mm extended hub

Fits:
Porsche 911 - 1965 to 1973
Porsche 914

Extended hubs are where the hub on the back of the steering wheel is deeper than the standard item. This brings the steering wheel rim closer to the driver.

If you're 1.85m (6 foot) tall or more, you probably know the problem of sitting, shifting and steering properly in the 911 or 914. The original steering wheel in the 911 to 1973 and in the 914 is very large, has a very thin rim and is far away from the driver. 

For drivers who want to sit, shift and steer sensibly in their 911 or 914, we have therefore produced a new steering wheel that meets all the requirements of originality, driving comfort and sportiness. 

Our steering wheels are covered in the finest leather and thicker padding just like the Carrera RS. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134708400

The product you are viewing cross references to these numbers

Balance beam brake pedal assembly - LHD 



Fits:
Porsche 911 - 1965 to 1977

Porsche 911 - 1978 to 1989 if brake booster (servo) is deleted
Porsche 914 - 1970 to 1976

Note - No bodywork adjustments to the footwell are required to fit the pedal assembly.

We have re-issued this motorsport inspired accessory that has not been available for many years

Left Hand Drive (LHD) only

As fitted to the 911 SC RS by the Porsche factory, a balance beam brake system works by allowing precise distribution of the braking forces between the front and rear axles by adjusting the brake beam. This allows the maximum braking performance for the vehicle.

If using upgraded (from standard) brake calipers with different piston sizes, different pads or larger brake discs  the braking force to the respective axles can be altered so a balance beam brake system should be used. Brake calipers with increased piston sizes can also lead to a "soft" brake pedal and the balance beam brake system prevents this.

The balance beam systems has two brake master cylinders mounted in parallel on a bracket that allows precise adjustment between the front and rear axles.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142305401

The product you are viewing cross references to these numbers

Padded leather steering wheel 380mm Carrera RS style. 

Fits:
Porsche 911 - 1965 to 1973
Porsche 914

If you're 1.85m (6 foot) tall or more, you probably know the problem of sitting, shifting and steering properly in the 911 or 914. The original steering wheel in the 911 to 1973 and in the 914 is very large, has a very thin rim and is far away from the driver. 

For drivers who want to sit, shift and steer sensibly in their 911 or 914, we have therefore produced a new steering wheel that meets all the requirements of originality, driving comfort and sportiness. 

Our steering wheels are covered in the finest leather and thicker padding just like the Carrera RS. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134708400

The product you are viewing cross references to these numbers

12 plug distributor, Bosch style. Porsche 911 1972 to 1989

Rotates clockwise

Fits:
Porsche 911 - 1972 to 1989
Excluding 911 SC 3.0ltr

This distributor is made in the historical design of the original Bosch 3.0 RSR ignition distributor and combines the latest technology with an authentic look. 

The ignition map is easily and freely programmable via an app and Bluetooth. 

In addition, an immobilizer can be locked/unlocked with a PIN and a speed limiter can also be set easily via a smartphone. 

This version requires two 3-pin HKZ devices but it fits all engines from 1972 to 1989, so from the 2.4ltr to the 3.2 Carrera 

This ignition distributor rotates clockwise, so for all engines except 911 SC 3.0ltr

12 plug distributor, Bosch style. 

Anticlockwise rotation



Fits:
Porsche 911 SC - 1978 to 1983

This distributor is made in the historical design of the original Bosch 3.0 RSR ignition distributor and combines the latest technology with an authentic look. 

The ignition map is easily and freely programmable via an app and Bluetooth. 

In addition, an immobilizer can be locked/unlocked with a PIN and a speed limiter can also be set easily via a smartphone. 

This version requires two 3-pin HKZ devices and fits the 911 SC 3.0ltr

This ignition distributor rotates anti-clockwise.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90160202510

The product you are viewing cross references to these numbers

12 plug distributor, Magneti Marelli style. 

Clockwise rotation



Fits:
Porsche 911 - 1972 to 1989
Excluding 911 SC 3.0ltr

This distributor is made in the historical design of the original Magneti Marelli 2.8/3.0 RSR ignition distributor and combines the latest technology with an authentic look. 

It was installed at the factory on the 911 ST 2.5ltr and on the 2.8ltr 911 RSR and the ignition map is easily and freely programmable via an app and Bluetooth. 

In addition, an immobilizer can be locked/unlocked with a PIN and a speed limiter can also be set easily via a smartphone. 

This version requires two 3-pin HKZ devices but it fits all engines from 1972 to 1989, so from the 2.4ltr to the 3.2 Carrera 

This ignition distributor rotates clockwise, so for all engines except 911 SC 3.0ltr

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90160202500

The product you are viewing cross references to these numbers

Heater pipe retainer bushing
Price is for each.



Fits:
Porsche 955 MKI Cayenne S 2003-06
Porsche 955 MKI Cayenne Turbo 2003-06

Click 'Zoom in' for large parts diagram.
Diagram Ref No 18



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94810627900

The product you are viewing cross references to these numbers

Exhaust hexagon nut. M8 zinc plated. Self locking.
Sold EACH.



Fits:
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 996 GT3 2000-05
Porsche 997 C2 / C4 / C2S / C4S 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90038000501

The product you are viewing cross references to these numbers

Front 1/4 light window lower seal.
Replacement rubber seal for the small vent (quarter-light) windows or fixed vent-glass on classic Porsche 911/912/964 models. It is moulded to match the original seal’s profile, length ensuring proper fitment in the door-frame groove and restoring the original sealing integrity.

Fits
Porsche 911 1964 - 1973 for the vent windows (both sides)
Porsche 911 / T 1974 - 1989 for the outside of the door (both sides)
Porsche 964 1989 - 1994 (both sides)

Diagram ref no. 11

This window seal creates a tight, weather-proof barrier around the vent or quarter-light glass, preventing water, dust, and wind from entering the cabin. It reduces wind-noise and drafts for improved comfort, while maintaining correct glass seating and alignment for a clean, factory-original appearance. The seal also cushions the glass, protecting both the door frame and the glass edge from vibration and wear over time.

Seals degrade over time - rubber can harden, shrink, or crack due to age, UV exposure, and repeated flexing. When the seal fails:
• Water can leak into the cabin, causing wet carpets or interior corrosion.
• Dust, wind-noise, and drafts may enter the cabin, creating discomfort.
• Glass alignment may become poor, leading to gaps or rattles.
• Corrosion risk increases as moisture collects behind the door trim.
Replacing with a fresh seal restores proper weather-proofing, cabin comfort, and preserves body integrity, especially important on classic 911s used in everyday or show car condition.

You should replace this seal if the original rubber has become brittle, cracked, deformed, or is missing altogether. A new seal is also recommended if you notice water leaks, dust entering through the vent window area, or increased wind-noise or rattling at speed. If the vent glass no longer sits evenly or you are carrying out a restoration or refreshing the door trim and glass assembly, installing a fresh seal will help ensure proper fit and weather protection.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153193320

The product you are viewing cross references to these numbers

Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.




For cars with Ceramic barke PCCB (I450)
Porsche 981 Boxster / Boxster Spyder 2012-16 (FRONT)
Porsche 982 (718) Boxster 2017>> (FRONT)
Porsche 981C Cayman / Cayman GT4 2014-16 (FRONT)
Porsche 982C (718) Cayman 2017>> (FRONT)

Price shown is for each wire sensor.
Fits Left or Right


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99160918100

The product you are viewing cross references to these numbers

Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.




Porsche 991.1 C2S / C4S 2012-16 FRONT
Porsche 991.2 C2S / C4S 2017>> FRONT
Porsche 991.1 Turbo >>2016 (FRONT)
Porsche 991.2 Turbo 2017>> (FRONT)
Porsche 991 GT3 2014-17 (FRONT)

Porsche 992.1 C2 / C2S / C4 / C4S 2019>> (FRONT)

For Cars with Ceramic brake PCCB (I450)
Porsche 991.1 C2 / C2S / C4 / C4S 2012-16 (FRONT)
Porsche 991.2 C2 / C2S / C4 / C4S 2017>> (FRONT)
Porsche 992.1 C2 / C2S / C4 / C4S 2019>> (FRONT)

Price shown is for each wire sensor.
Fits Left or Right

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99160918100

The product you are viewing cross references to these numbers

Wishbone inner bush rear.

 

Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85

Click 'zoom in' for large parts diagram.
Diagram Ref No 11.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477407181B

The product you are viewing cross references to these numbers

Exhaust hexagon head bolt (LONG). M 8 x 140.
EACH



Fits:
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 996 GT3 2000-05
Porsche 997 C2 / C4 / C2S / C4S 2005-08

Diagram ref no 24.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90037818301

The product you are viewing cross references to these numbers

Clutch bolt.
9 per car. Sold each.

 

Fits:
Porsche 911 1970-86 (915 Gearbox)
Porsche 930 Turbo 3.0L 1975-77 (915 Gearbox)

Click on 'Zoom in' to see the diagram.
Diagram ref no 4.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006709003

The product you are viewing cross references to these numbers

Replacement handbrake cable.
Sold each. Need 2 cables per vehicle.

The OE Match handbrake cable is a precision-made replacement part for Porsche 911 (997) models. This cable connects the interior handbrake lever to the rear brake assemblies, ensuring reliable parking brake function and vehicle safety.

Fits:
Porsche 997.1 Carrera 2005 - 2008
Porsche 997.2 Carrera 2009 - 2012
Porsche 997 Turbo / GT2 2007 - 2013
Porsche 997 GT3 2007 - 2010

Diagram ref no 5

What this product does:
• Transfers force from the handbrake lever to the rear brakes
• Ensures the car stays securely parked on inclines and flat surfaces
• Provides consistent braking force without excessive lever travel

Location: Runs from the handbrake lever inside the cabin to the rear brake system

Over time, handbrake cables can stretch, corrode, or seize, causing weak or uneven braking force. This can result in excessive lever travel, poor handbrake performance, or even brake failure on slopes. Replacing it with an OE Match cable restores proper tension, reliability, and safety—keeping your Porsche secure when parked.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99742414106

The product you are viewing cross references to these numbers