OE Match

Complete track rod assembly with ball joint and lock nut included. 

Fits:
Porsche 928 S 5.0L 1986 (US Market)
Porsche 928 S2 4.7L 1986
Porsche 928 S4 5.0L 1987-91
Porsche 928 Clubsport 5.0L 1988-89
Porsche 928 GT 5.0L 1989-91
Porsche 928 GTS 5.4L 1992-95
- Sold individually. 

Diagram ref. 4. 

The steering rack controls the front wheels via two track rods, each ending in a replaceable joint known as a track rod end, which connects to the swivel hub. This listing includes both the track rod and track rod ends—a complete assembly ready to install. Track rod ends and the rods themselves are subject to wear over time, which can result in poor steering response, uneven tire wear, and reduced handling performance. Worn components are also a common cause of MOT failures in the UK and are likely checked in vehicle inspections in other countries.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92834703109

The product you are viewing cross references to these numbers

Standard rear spring plate.
2 Required per car. Price is EACH

Fits:
Porsche 911 1987 to 1989 with G50 Gearbox
Porsche 911 turbo 1989 with G50 Gearbox

Replace the rusty, worn, rear spring plates with this new item.
Spring plates and bushes are designed for standard road use

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133300906

The product you are viewing cross references to these numbers

Performance Rear Anti Roll Bar Drop Link
SET OF 2 Left & Right
SPORT variant with +30% increased rubber hardness from the OE 93033307101 & 93033307201

Fits:
Porsche 911 - 1978 to 1989
Porsche 930 Turbo 3.3ltr - 1978 to 89

Anti-Roll Bar Drop Links using stiffer bushes aimed at Performance and track driving.

Click 'Zoom in' for large parts diagram.
Diagram ref no 12.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033307101+201

The product you are viewing cross references to these numbers

Tie rod bellow support.



Fits:
Porsche 911 - 1969 to 1977
Porsche 914 - 1970 to 1976

2 Required per car

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134705602

The product you are viewing cross references to these numbers

Uniball upgraded engine mount. Price is each should be purchased as a pair.

Fits:
Porsche 964 1989 to 1994
Porsche 993 1994 to 1998

Replace your worn, original engine mounts with these upgraded uniball items.
This performance upgrade reduces engine movement to enhance and improve performance.
Designed for track use.

2 Required per car

Diagram ref no 7A

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96437504381

The product you are viewing cross references to these numbers

Upgraded engine mount. Price is each should be purchased as a pair.
These have a HD rubber Shore rating of 75 and are for performance road and track use.



Fits:
Porsche 964 1989 to 1994
Porsche 993 1994 to 1998

Replace your worn, original engine mounts with these upgraded RS style, rubber bushed items.

2 Required per car

Click 'Zoom in' for large parts diagram.
Diagram ref no 7A

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96437504381

The product you are viewing cross references to these numbers

Engine mount. Price is each should be purchased as a pair.
These have a rubber Shore rating of 65 and are for standard road use

Fits:
Porsche 964 1989 to 1994
Porsche 993 1994 to 1998

Replace your worn, original engine mounts with these RS style, rubber bushed items.

2 Required per car

Diagram ref no 7A

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96437504381

The product you are viewing cross references to these numbers

Rear spring plate assembly.
SET OF 2 left & Right



Fits:
Porsche 924 - 1978 to 1985
Porsche 924 turbo - 1979 to 1985
Porsche 944 - 1982 to 1985

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477511201+2

The product you are viewing cross references to these numbers

Lower rear rocker arm bar
1 Required per side, Price is each



Fits:
Porsche 928 1978-1995

The Porsche 928 lower rear arm can now, finally be renovated with our newly produced rocker arm bar.

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833108500

The product you are viewing cross references to these numbers

oil cooler aluminium.

Fits:
Porsche 914-6 1970 - 1976

Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110705903

The product you are viewing cross references to these numbers

Drive belt deflection roller.
A direct-fit idler/deflection pulley for the auxiliary (serpentine) drive belt. Built to OE geometry, it guides the belt path, stabilises belt tracking, and helps maintain correct wrap on the alternator, A/C compressor and power-steering/water pump pulleys.

Fits:
Porsche 996 Carrera 3.4L / 3.6L 1997-05 6-speed Manual transmission
Porsche 997.1 Carrera 3.6L / 3.8L 2005-08 Manual transmission
Porsche 987.1 Boxster 2.7L / 3.2L / 3.4L 2005-08 Manual transmission
Porsche 987C.1 Cayman 2.7L / 3.4L 2005-08 Manual transmission

Diagram ref No 12

The deflection roller maintains smooth, stable tension in the auxiliary belt system. It helps guide the belt precisely over pulleys, reduces vibration, and ensures efficient power delivery to engine accessories such as the alternator, A/C compressor, and power steering pump. Built with OE-spec bearings, it delivers quiet operation and long-lasting reliability under high-speed, high-load conditions.

Over time, the bearing inside the roller can wear, dry out, or seize due to constant load and heat exposure. A failing roller may cause belt noise, vibration, or premature belt wear, potentially leading to accessory drive failure.

Replace the deflection roller when:
• You hear squeaking, chirping, or grinding from the belt area
• The pulley feels rough or loose when rotated by hand
• During belt or tensioner replacement as preventive maintenance
• There are signs of belt misalignment or edge fraying

Installing a new deflection roller ensures correct belt tracking, quiet performance, and dependable accessory drive operation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99710211900

The product you are viewing cross references to these numbers

REAR Bumper horn / over rider with rubber moulding.

Fits:
Porsche 911 2.0-2.4 01/63-07/73
Porsche 911 RS 2.7 08/72-07/73
Porsche 912 1.6 01/65-02/70

Fits: Left or Right. Price is for each.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150503326

The product you are viewing cross references to these numbers

Control arm lower, Rear.



Fits:
Porsche 986 Boxster 1997-2004 Rear

Please click 'Zoom in' to see the diagram (No 8)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98633104308

The product you are viewing cross references to these numbers

Climate control hose sealing ring.
Rubber sealing ring / gasket used in the HVAC/heater/ventilation system of classic 911 / 912 cars. Its sealing points where heater/vent hoses pass through body or bulkhead. Ideal when refurbishing HVAC ducts, replacing heater hoses, restoring classic 911/912 ventilation and heat systems.
Sold each. 2 required per vehicle.

Fits:
Porsche 911 1965 - 1989 all models

Diagram ref no 18

Because over decades the original sealing rings often become brittle, hard, compressed or cracked (due to heat cycles, age, vibration, exposure to cabin air, moisture and dust), they lose their ability to seal properly.

This can lead to:
• Unwanted air leaks or drafts into cabin
• Water or dust ingress into the interior or into heater ducts
• Poor heating or ventilation performance
• Increased cabin noise, wind-noise or fumes entering cabin (especially on vehicles with engine-bay to cabin vents).

Replacing with a correct-spec sealing ring ensures a tight, flexible seal that restores proper HVAC function, occupant comfort, and helps preserve the integrity of the car’s interior and ventilation system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90157291301

The product you are viewing cross references to these numbers

Alternator overrun pulley with cover.

Inner Diameter: 17 mm
No. of Ribs: 6
Outer Diameter: 55,7 mm
Tightening Torque: 85 Nm
Width: 42,7 mm

Fits:
Porsche 95B.1 Macan 2014-18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94660395500

The product you are viewing cross references to these numbers

Shock absorber top mount bush.
Cars without Air Suspension



Fits:
Porsche Cayenne 955 Front and Rear
Porsche Cayenne 957 Front (cars with standard suspension I1BW)

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534301800

The product you are viewing cross references to these numbers