OE Match

Lambda oxygen sensor.



Fits
Porsche Boxster 986 >>2002
Before or After Cat fits both

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance/Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98660612601

The product you are viewing cross references to these numbers

Side Light Bulbs 501 5W AMBER
Price is for each



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99963113890

The product you are viewing cross references to these numbers

Engine flywheel for mounting 964 / 993 engine on 915 gearbox

Fits
Porsche 964 (911) C2 1989-93
Porsche 964 (911) C4 1989-93
Porsche 993 (911) C2 1994-97
Porsche 993 (911) C4 1994-97
Porsche 993 (911) C2S 1994-97
Porsche 993 (911) C4S 1994-97

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96410203301

The product you are viewing cross references to these numbers

Sensor boost pressure.



Fits:
Porsche 996 Turbo / GT2 2001-05
Porsche 997 Turbo / GT2 / GT2 RS 2007-11
Porsche 997 Turbo / Turbo S 2010-13
Porsche 955 Cayenne Turbo 4.5L V8 2003-06
Porsche 957 Cayenne Turbo 4.8L V8 2007-10
Porsche 958 Cayenne Turbo 4.8L 2011>>
Porsche 970 Panamera Turbo 4.8L 2011>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99660618000

The product you are viewing cross references to these numbers

Air filter.



Fits:
Porsche 911 1965-73 Cylinder type
Porsche 914 1970-76

Replacement Air Filter.
Outer diameter: 152 mm,
Inner Diameter: 88 mm,
Inner Diameter 1: 88 mm,
Height: 222 mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110895511

The product you are viewing cross references to these numbers

Brake light switch 2pin. Fits into the brake master cylinder.
Sold each.



Fits:
Porsche 911 1986-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

113945515H

The product you are viewing cross references to these numbers

Number plate light



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 991 Turbo 2014>>
Porsche 991 GT3 2014>>
Porsche 981 Boxster 2012-16
Porsche 981 Boxster Spyder 2016
Porsche 718 (982) Boxster 2017>>
Porsche 982 Boxster Spyder 2019>>
Porsche 981C Cayman 2014-16
Porsche 718C (982C) Cayman 2017>>
Porsche 981 Cayman GT4 2016
Porsche 982 Cayman GT4 2019>>
Porsche 918 Spyder 2015
Porsche 970 Panamera 2014>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAB943021

The product you are viewing cross references to these numbers

Distributor cap.



Fits:
Porsche 911 1965-68 S / L
Porsche 911 1972-73
Porsche 911 2.7L 1974-77

Please note: If your car has a 002 Bosch yellow sticker on distributor you will need original distributor cap as Bosch option we offer does not have the cut out for wiring harness.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91160293300

The product you are viewing cross references to these numbers

Distributor cap.
This cap forms the upper section of the distributor assembly, routing high-voltage current from the ignition coil to each spark plug wire in the correct firing order.

Fits:
Porsche 924 1976 - 1980
Porsche 912E

Over time, original caps can crack, carbon-track, corrode at the terminals, or develop moisture ingress - all of which reduce ignition performance. Installing a fresh  cap restores clean, strong spark delivery and stable engine operation.

A deteriorated or damaged distributor cap can cause:
• Misfires, hesitation, or rough running
• Hard starting, especially in damp weather
•  Weak or inconsistent spark delivery
•  Poor fuel efficiency or lack of power
Replacing the cap is a simple, effective way to restore ignition reliability and smooth engine performance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

113905207C

The product you are viewing cross references to these numbers

Main Crankshaft Bearing Shell Standard.
SET OF 14

Fits:
Porsche Boxster 986 2.5L M96.20
Porsche Boxster 986 2.7L M96.22 / M96.23
Porsche Boxster 986 3.2L M96.21 / M96.24
Porsche 996 3.4L M96.01 / M96.02 / M96.04

Porsche Boxster 987 2.7L M97.20
Porsche Boxster 987 3.2L M96.26
Porsche Cayman 987C 2.7L M97.20

Porsche Boxster 987 2.7L M96.25*
Please note you will be required to change the bearing case on engine M96.25 (part #99610100709) as these shells will not fit your old case.

Diagram Ref No 13.

Porsche has superseded the number 98710120501 to this new design. Notches are on opposite sides and bearing case will also need to be changed. This change affects cars with M96.25 engines.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610120510

The product you are viewing cross references to these numbers

Fuel hose connector.



Fits:
Porsche 911 (1974-1983)
Porsche 930 Turbo (1975-1977)

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120117102

The product you are viewing cross references to these numbers

Horn, 500 Hz, high tone.



Fits:
Porsche 911 2.0L-2.7L 01/1963-07/1973
Porsche 912 1.6L 01/1965-02/1970

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG63511302

The product you are viewing cross references to these numbers

Speedo / speedometer cable.

Fits:
Porsche 911 1972- 1977

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91164151000

The product you are viewing cross references to these numbers

Speedo cable for LHD cars.



Fits:
Porsche 924 1976-85 LHD Cars ***not for (J)
Porsche 924S 1986-88 LHD Cars
Porsche 944 1982-85 LHD Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

142957801C

The product you are viewing cross references to these numbers

Engine cylinder head exhaust valve.



Fits:
Porsche 924S 2.5L V8 1986-88
Porsche 944 2.5L V8
Porsche 928S 4.7L 1980-82

924, 2.5 S M 44.08/M 44.07
924, 2.5 S M 44.08/M 44.07
924, 2.5 S M 44.08/M 44.07
944, 2.5 M 44.08/M 44.02/M 44.07/M 44.04
944, 2.5 M 44.08/M 44.02/M 44.07/M 44.04
944, 2.5 M 44.08/M 44.02/M 44.07/M 44.04

Click 'Zoom in' for large parts diagram.
Diagram Ref No 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92810541004

The product you are viewing cross references to these numbers

The Porsche Macan engine mounts play a crucial role in keeping the engine and transmission securely connected to the frame or sub-frame. They provide stable support while minimizing vibrations that could otherwise transfer into the cabin. Properly functioning engine mounts help maintain drivetrain alignment, ensuring smooth performance and preventing premature wear on other components. 

Over time, engine mounts can wear out or deteriorate due to heat, stress, and age. When this happens, you may experience increased engine noise, excessive vibration, and noticeable engine movement — all signs that your mounts need replacement. Replacing worn mounts restores comfort, stability, and overall driving enjoyment.

Fits:
Porsche Macan 95B V6 S / GTS / TURBO
(not for Diesel engines)

Common Symptoms of Engine Mount Failure

• Excessive engine vibration
• Noticeable drivetrain vibration
• Uneven engine alignment or sagging
• Engine rocking or movement during gear changes
• Engine shifting or jerking when braking

Click 'Zoom in' for large parts diagram.
Diagram ref no 1 (LEFT) and 2 (RIGHT).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94637505

The product you are viewing cross references to these numbers