OE Match

Water coolant expansion tank.



Fits:
Porsche 958 Cayenne 3.6L 2011-18
Porsche 958 Cayenne 4.8L S / GTS 2011-18
Porsche 958 Cayenne 4.8 Turbo 2011-18
Porsche 958 Cayenne 3.0L / 4.2L Diesel 2011-18
Porsche 958 Cayenne 3.0L Hybrid 2011-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810615102

The product you are viewing cross references to these numbers

Oil temperature sensor.



Fits:
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 964 Turbo 1991-93

Click 'Zoom in' for large parts diagram.
Diagram ref no 23.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94460612500

The product you are viewing cross references to these numbers

Coolant temperature sensor. 

(*on Porsche 996 Turbo there is also an additional of same the sensor used for Oil temperature)

Fits:
Porsche 986 Boxster 2.7L, 3.2L - for Coolant temperature
Porsche 996 Carrera 3.6L - for Coolant temperature
Porsche 996 Turbo - for Coolant & Oil temperature*
Porsche 996 GT3 - for Coolant temperature
Porsche 997 2005-08 -for Coolant temperature
Porsche 997 GT3 - for Coolant temperature
Porsche 955 Cayenne S & Turbo - Coolant temperature

Diagram ref no 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99660641000

The product you are viewing cross references to these numbers

Handbrake shoes expanding bow.
Rusty hand brake shoes spring will stop the hand brake shoes from engaging or releasing, if they don't release they can over heat and cause major problems.
Sold each, 4 expanding bows per car.

Fits:
Porsche 911 1970 - 1989
Porsche 911 Turbo 1975 - 1977

Diagram ref no. 24

The hand-brake expander bow is a small but vital component in the parking-brake system. When it becomes worn, bent or corroded, you may experience:
• Less holding force, vehicle may roll despite hand-brake applied
• Hand-brake shoes not fully engaging or fully releasing, leading to drag or overheating
• Uneven parking-brake performance between rear wheels
• Increased wear on cables, shoes, or other components due to mis-actuation

Replacing this bow restores correct geometry, smooth release and reliable holding - ensuring safety and preserving the value of your classic Porsche.

When to replace:
• Hand-brake lever needs excessive travel to hold the vehicle
• Original bow is bent, corroded or missing
• Parking-brake shoes were replaced or the mechanism was disassembled during service
• You’re restoring or maintaining a high-value classic and want all brake components to be correct specification

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91135209001

The product you are viewing cross references to these numbers

Fuel flap release grommet.



Fits:
Porsche 911 1965-89
Porsche 930 Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91450431900

The product you are viewing cross references to these numbers

Alternator cooling hose connect.
90º coolant fitting at the alternator.
Includes O-ring; Premium Metal Construction

Fits:
Porsche 955 Cayenne S / Turbo 4.5L 2003-06
M 816 09867 >>
M 8260 4064 >>

Porsche 957 Cayenne 4.8L 2007-10
Porsche 958 Cayenne 4.8L 2010-18
Porsche 970 Panamera 4.8L 2010-16

Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94810646200PRM

The product you are viewing cross references to these numbers

Classic tool bag scots motif.



Fits:
Porsche 911 (1965 to 1989)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG91172110

The product you are viewing cross references to these numbers

Classic tool bag black / white pepita.



Fits:
Porsche 911 (1965 to 1989)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG90172110

The product you are viewing cross references to these numbers

Intake boot - Intercooler pipe to throttle valve.



Fits:
Porsche 944 TURBO 1986-91

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95111037201

The product you are viewing cross references to these numbers

Oil tank breather hose.
As the upper of the two breather hoses leading from the top of the oil tank to the connecting piece, it plays a key role in maintaining correct hydrocarbon emission control and stable engine performance.

Fits:
Porsche 964 1989 - 1994

Diagram ref no 37

Designed to match the original hose in shape, length, and material, this replacement ensures a secure, leak-free connection and reliable vapor flow. Over time, factory hoses become brittle, soft, or oil-soaked, leading to vapor leaks, oil mist in the engine bay, or improper crankcase ventilation. Installing an fresh breather hose restores the integrity of the dry-sump ventilation circuit and helps maintain stable engine operation.

A degraded breather hose can lead to:
• Oil mist or residue in the engine bay
•  Rough or unstable idle due to pressure imbalance
•  Oil leaks caused by crankcase over-pressure
•  Increased emissions and unpleasant odours
Replacing the breather hose keeps the dry-sump system operating properly and ensures a clean, leak-free engine compartment.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96420714501

The product you are viewing cross references to these numbers

Engine to heat exchanger hose, brown paper/alu, LEFT 458mm X 60mm.



Fits:
Porsche 911/911S/ Carrera 3.0 / 911SC 1974-83
Porsche 914-6 1970-76

This product supersedes Porsche's old part numbers:
- 90121119500

Click 'Zoom in' for large parts diagram.
Diagram ref no. 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90121119501

The product you are viewing cross references to these numbers

Replacement driveshaft. FRONT.  Price is for each Driveshaft.



Fits:
Porsche 996 C4 / C4S 1999-2005
Porsche 996 Turbo 2001>>
Manual or Automatic

This product supersedes Porsche's old part numbers:
- 99634903801
- 99634903810

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634903811

The product you are viewing cross references to these numbers

Differential carrier bearing.



Fits:
Porsche 914/6 1970–1972 Sportomatic gearbox only
Porsche 911 F 1965–1973

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99905900800

The product you are viewing cross references to these numbers

Brake pad pin kit for both front calipers.
Front brake pad pin kit (also called a front brake pad fitting/hardware kit) for classic Porsche 911 (1974–1983) front calipers. It includes the retaining hardware that secures the brake pads correctly in the caliper.
This kit will fit 2 calipers.


Porsche 911 1974 - 1983

It locks the front brake pads into the caliper using the correct factory-style retention method. Fresh hardware helps the pads sit correctly, reduces unwanted movement, and can help minimise brake noise caused by worn or corroded retaining parts.

• Retains and stabilises brake pads within the front calipers
• Helps keep pad alignment consistent under braking loads
• Supports smoother pad operation and reduces the chance of rattles/clunks from loose hardware

Brake hardware lives in a harsh environment (heat, brake dust, water, corrosion). Over time, pins and spring clips can wear, rust, or lose tension - allowing pad movement that can cause noise, uneven pad wear, and less consistent braking feel. Replacing the hardware during pad changes helps maintain proper pad retention and braking refinement.

When to replace:
• During front brake pad replacement (best practice)
• If pins/clips show corrosion, wear, or bending If you hear rattling/clunking from the front brakes over bumps
• If pads show uneven wear linked to poor retention

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91135195100

The product you are viewing cross references to these numbers

Brake Pad Pin Kit.


Porsche 955 Cayenne MKI 2003-06 Front caliper (except Turbo S)
Porsche 957 Cayenne MKII 2007> Front caliper
(except Turbo S)

Diagram ref no 9.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95535195900

The product you are viewing cross references to these numbers

Air filter box carbon for slide throttles.
Material: Carbon



Fits:
Porsche 911 Verious engine types with MFi / EFI throttles as shown in the images

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110800200C

The product you are viewing cross references to these numbers