OE Match

Drive belt tensioning roller lever.



Fits:
Porsche 957 Cayenne S / GTS / Turbo 2007-10
Porsche 958 Cayenne S / GTS / Turbo 2011>>
Porsche 970 Panamera S / GTS / Turbo 2010-13

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94810240375

The product you are viewing cross references to these numbers

Belt deflector roller. Porsche 955 Cayenne S / Turbo



Fits:
Porsche 955 Cayenne S 4.5L 2003-06
Porsche 955 Cayenne Turbo 4.5L 2003-06

This product supersedes Porsche's old part numbers:
- 94810211900

Click 'zoom in' for large parts diagram.
Diagram ref No 6.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94810211902

The product you are viewing cross references to these numbers

Secondary air injection pump.



Fits:
Porsche 958 Cayenne 3.6L V6 2015-18
Porsche 95B Macan S 3.0L / Macan Turbo 3.6L 2014-18
Porsche 970 Panamera S 3.0L 2014-16
Porsche 997.2 3.8L Turbo / Turbo S 2010-13
Porsche 991.1 3.8L Turbo 2014-16
Porsche 991.2 3.8L Turbo / Turbo S / GT2 RS 2017-18
Porsche 991 GT3 3.8L 2014-17
Porsche 991 4.0L GT3 / GT3 RS / R 2015-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B959253

The product you are viewing cross references to these numbers

6V Headlight Relay Kit.
This kit is assembled with 2 Bosch relays. This reduces the current running through the headlight switch minimizing premature failure and improving lighting efficiency. Mounts to the fuse panel using high-strength double sided adhesive. No drilling required to mount



Fits:
Porsche 356 1955-61

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64461511000

The product you are viewing cross references to these numbers

Two stage rear window defogger harness. Connects to engine bay relay panel with two-pole connector (included). Grommet for rear parcel shelf pass through also included.



Fits:
Porsche 911 1971-83

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161203201

The product you are viewing cross references to these numbers

Clutch fork.



Fits:
Porsche 911 1987-89
Porsche 964 1989-94 all models
Porsche 993 1994-98 all models
Porsche 996 GT2, GT3
Porsche 997 GT2 2005>>
Porsche 997 MKII GT2RS 2010>>
Porsche 997 GT3 2007-10
Porsche 997 GT3 RS 2010>>

Click 'Zoom in' to see the diagram.
Diagram ref no 19.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99711608690

The product you are viewing cross references to these numbers

Shift fork – reverse gear and fifth gear.

Fits:
Porsche 911 F (1972 to 1973) and
Porsche 911 G (1974 to 1986) that are equipped with a 915 transmission (excluding Turbo)

Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91530311301

The product you are viewing cross references to these numbers

Differential outer bearing, Left. 50 x 90 x 21.7



Fits:
Porsche 911 1987-89
Porsche 911 Turbo 1975-89
Porsche 968 1992-95
Porsche 964 C2 / C4 1989-94
Porsche 993 C2 1994-98
Porsche 986 Boxster S 2000-04
Porsche 996 C2 / C4 1998-05
Porsche 996 Turbo GT2 2001-05
Porsche 996 GT3 2000-05
Porsche 997.1 Turbo / GT2 / GT2 RS 2007-09
Porsche 997.2 GT2 RS 2011
Porsche 997 GT3 / GT3 RS 2007-11

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99905906400

The product you are viewing cross references to these numbers

Flywheel Ring Gear – Hardened Steel (OEM 964.114.143.31). This precision-machined hardened steel ring gear features starter-pinion teeth pressed onto the outer edge of a single-mass “RS” or lightweight flywheel. It’s the critical interface between the starter motor and the engine — the starter’s small pinion engages these teeth to crank the engine during start-up.

Technical Summary

• Function: Transfers starter motor rotation to the flywheel for engine cranking.
• Location: Pressed or shrink-fitted onto the outer diameter of the flywheel.
• Construction: Heat-treated, hardened steel with precision-machined teeth for maximum strength and wear resistance.
• OEM Part Number: 964.114.143.31 (also listed as 96411414331).
• Applications: Designed for RS, single-mass, or lightweight flywheels used in various Porsche 964 and 993 models, and select 996/997 GT3 and GT2 variants. Not compatible with dual-mass flywheels.

Fits:

• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 993 (911) RS 1994-97
• Porsche 996 GT3 MKI 1999-02
• Porsche 996 GT3 MKII 2003>>
• Porsche 996 GT3 RS 2003-04
• Porsche 997 MK1 GT3 2007-09  

Why You Should Replace Your Ring Gear

1. Damaged or Missing Teeth

Grinding, rough engagement, or failed starts often result from chipped, flattened, or missing teeth on the ring gear. When the teeth are damaged, the starter pinion can’t engage properly, leading to grinding or slipping during start-up.

2. Wear, Pitting, or Corrosion

Over time, surface wear, rust, or pitting can develop due to age or moisture exposure. These issues reduce engagement quality and increase wear on both the starter and ring gear.

3. Loose or Shifted Ring Gear

Although ring gears are press-fitted, heat cycles or improper installation can cause them to loosen or shift. A loose ring gear creates noise, accelerates wear, and poses a potential safety hazard.

4. During Flywheel or Clutch Service

Whenever the flywheel is removed for clutch replacement or resurfacing, it’s best practice to inspect the ring gear closely. Replace it if you find any damage or wear—it’s far cheaper than removing the transmission again later.

5. Starter or Pinion Replacement or Upgrades

If you’re installing a new or upgraded starter—or have had a starter failure that damaged the pinion—inspect and replace the ring gear at the same time to ensure proper engagement and reliable operation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411414331

The product you are viewing cross references to these numbers

Wiper blade front, SET OF 2 wiper blades
This is a set of two blades, designed to replace both front wipers simultaneously, ensuring matched performance and wear. These blades replicate the original Porsche blade geometry, mounting interface for an authentic fit and finish.

Fits:
Porsche 911 1971 - 1977
Porsche 930 (911 Turbo) 1975 - 1977
Porsche 914 1970 - 1976
Porsche 964

This is a premium wiper-blade pair engineered for the front windshield. The blades provide consistent, streak-free wiping, proper contact across the windshield curvature, and correct fitment with the Porsche wiper arm mounting system.

Over time, wiper blades decline due to UV exposure, rubber degradation, wear and climate. A worn blade can cause streaking, reduced visibility in rain, noise or even scratching of the windshield.

Replace your blades when:
• You notice streaks or smears during wiping
• The rubber edge appears cracked, hard or uneven
• You’re preparing your Porsche for rainy or winter seasons

Installing a matched set of OE Match blades ensures both sides wipe evenly, improves driver visibility and maintains the aesthetic integrity of your classic Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96462890102KIT

The product you are viewing cross references to these numbers

Indicator lens seal rear.

Fits:
Porsche 911/912 >>1968

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163141

The product you are viewing cross references to these numbers

Brake disc cover plate. REAR.

Fits:

Porsche 911 3.0L 1974-83
Porsche 911 3.2L 1984-89

Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91135280120

The product you are viewing cross references to these numbers

Electric washer tank kit 6V. Porsche 356



Fits:
Porsche 356 / 356A / 356B / 356C 1950-65

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG62872000

The product you are viewing cross references to these numbers

Diagnostic plug / cover.
Plastic cover located at firewall



Fits:
Porsche 944 1989-91

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94461241701

The product you are viewing cross references to these numbers

Catch pin for rear lid upper part. Porsche 911 1965-89 / 964

Fits:
Porsche 911 1965-89
Porsche 930 Turbo 3.0L / 3.3L 1975-89
Porsche 964 1989-94

Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93051205200

The product you are viewing cross references to these numbers

Upper cylinder push lock for rear luggage compartment lid.

Fits:
Porsche 914 1970-76

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91451204111

The product you are viewing cross references to these numbers