OE Match

Door handles lock with lock cylinder. 

Fits:
Porsche 911 - 1973 to 1986

Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91153194

The product you are viewing cross references to these numbers

Pivot repair pin window regulator. 
Sold each - 2 required per car

Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1955 to 1959

Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965
Porsche 912 - 1965 to 1968
Porsche 911 - 1965 to 1968

Pivot repair pin for steel window regulator. The galvanised steel pivot spring retainer replaces the original soft aluminium pivot.
The slot is parallel to the other end.

Pivot pin for diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6445420440

The product you are viewing cross references to these numbers

Headlight rim, chrome, Hella style - Adjusting holes at 2 and 7 o'clock.
Sold each - fits left or right hand side

Fits:
Only for Vehicles with Hella style Headlamps

Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965

Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64463111201

The product you are viewing cross references to these numbers

Reinforcement plate for steering lock. 

Fits:
Porsche 911 - 1984 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134735901

The product you are viewing cross references to these numbers

Contact Bow for Handbrake Warning Light. 

Fits:
Porsche 911 - 1965 to 1989
Porsche 912 - 1965 to 1976
Porsche 911 turbo - 1975 to 1989

Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161352320

The product you are viewing cross references to these numbers

Locking plate for screws on the steering shaft tube.

Fits:
Porsche 911 / 912 1965 - 1969

Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99903910400

The product you are viewing cross references to these numbers

Door handle trigger with hardware Chrome - fits Left or right hand side.
Sold each

Fits:
Porsche 911 - 1969 to 1977

Please note: this is only part of the handle (No 15 on diagram).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91153194100

The product you are viewing cross references to these numbers

Wiring harness starter motor to alternator. 

Fits:
Porsche 944 2.5ltr - 1982 to 1985 for cars with early dash
For LHD (Left Hand Drive) cars and RHD (Right Hand Drive)

• As original colored wiring.
• Complete harness including a 100% correct grommet with number 477971911
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
• Handmade, concourse quality.

Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94461201501

The product you are viewing cross references to these numbers

Wiring harness central door locking. 
Sold each - fits left or right 

Fits:
Porsche 911 3.2 Carrera - 1986 to 1988

• 7 Pole female connector to 2 and 7 pole ITT Cannon Super seal connector.
• As original colored wiring.
• Original neoprene terminal sleeves used.
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, Sulphur and phosphorous.

Handmade, concourse quality.

Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161226400

The product you are viewing cross references to these numbers

Break out test harness for 964 engine

Fits:
Porsche 964 - 1989 t 1994

14 x test lead for: 
1. Starter signal
2. Speed sender (only type 01 harness)
3. Resistor blower
4. Oil press
5. Back up light supply
6. Back up light from switch
7. NTC Blower
8. NTC Blower
9. Oil press (warning)
10. #30
11. Charge light / excitation
12. #30
13. Engine fan
14. Ground

Using our breakout harness you can easily take measurements and locate any faults.

All wires are marked indicating the specific function of each wire.

You remove the original connector and place our breakout harness back in between so that the entire electrical installation remains operational.

Comes with a detailed drawing showing function of each wire.

• As original colored wiring.
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, Sulphur and phosphorous.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964607017

The product you are viewing cross references to these numbers

Break out harness for 964 engine injector signals

Fits:
Porsche 964 - 1989 t 1994

10 x test lead for:
1. Ground
2. Injector cylinder 5
3. Injector cylinder 6
4. Injector cylinder 3
5. Injector cylinder 1
6. Injector cylinder 4
7. Injector cylinder 2
8. Common Injectors
9. Ground
10. Oil temp.

A valuable tool in every Porsche workshop.

Using our breakout harness you can easily take measurements and locate any faults.

All wires are marked indicating the specific function of each wire.

You remove the original connector and place our breakout harness back in between so that the entire electrical installation remains operational.

Comes with a detailed drawing showing function of each wire.

• As original colored wiring.
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, Sulphur and phosphorous.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964607016

The product you are viewing cross references to these numbers

Bonnet strap kit - Tan leather. 
Replica Tan leather hood / bonnet straps for all Porsche 356 models. It delivers a secure fit while restoring the authentic, period-correct look of the bonnet.

Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965

This kit secures the bonnet using durable leather straps and proper mounting hardware, ensuring both function and reliability. At the same time, it preserves the vintage authenticity and finishing details that are essential for restorations and show-quality Porsche 356 models.

•  Mounted across the front bonnet of Porsche 356, 356A, 356B, 356C models (approx. 1950s–1960s)
•  The straps run over the bonnet and fasten to chassis or body anchors under the front hood edge, holding the bonnet closed

Why replacement matters:
•  Original leather straps often deteriorate over time (crack, stretch, break), compromising the security and aesthetics of the bonnet
•  A faithful OE-Match replacement ensures correct dimensions, leather quality, and mounting hardware so the strap fits securely and looks authentic
•  Restoring the strap helps maintain original appearance, adds structural safety (prevents bonnet flutter or opening), and preserves the value and integrity of the classic build

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64451108010

The product you are viewing cross references to these numbers