Cabrio

Cabriolet hood tonneau cover.



Fits
Porsche 356A 1958 - 1960
Porsche 356B / 356C 1960 - 1965

Please choose black or beige inner lining

Product information:
Hood cover for covering and protecting the hood when open. The cover has two functions: - The hood cover protects the hood and exposed areas of headliner from dust and UV radiation (fading) while driving. - The hood cover prevents open hood parts from being blown about by the wind or becoming inflated and blocking the view to the rear.

Material:
Sonnenland Classic
Hood cover made of Sonnenland® canvas with separate Tenax fasteners. The fasteners have to be attached after fitting the cover to make sure that it fits properly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456109501

The product you are viewing cross references to these numbers

Cabriolet hood with clear rear screen.
Porsche 356 with beige headiner



Fits
Porsche 356A 1958 - 1960
Porsche 356B / 356C 1960 - 1965

For cars with beige headliner

Factory exact, original design:
The hood is made of the same original materials as the original hood.

Please choose the colour version of your headliner because part of the headliner will sewn onto the area around the rear window. We need this information to make sure that the colour of the imitation leather around the window will match your headliner.

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original.
TÜV-certified and permanently sewn-in.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456108201

The product you are viewing cross references to these numbers

Cabriolet hood with clear rear screen.
Porsche 356 with grey headiner



Fits
Porsche 356A 1958 - 1960
Porsche 356B / 356C 1960 - 1965

For cars with grey headliner

Factory exact, original design:
The hood is made of the same original materials as the original hood.

Please choose the colour version of your headliner because part of the headliner will sewn onto the area around the rear window. We need this information to make sure that the colour of the imitation leather around the window will match your headliner.

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original.
TÜV-certified and permanently sewn-in.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456108206

The product you are viewing cross references to these numbers

Cabriolet roof headlining
Porsche 356



Fits
Porsche 356A 1958 - 1959
Porsche 356B / 356C 1960 - 1965

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic.

Please select a colour for your headliner.

Material:
Original cloth headliner

Factory exact, original design:
The headliner is formed by the Sonnenland canvas inner layer just like the original.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64455550121

The product you are viewing cross references to these numbers

Cabriolet roof padding mat
Porsche 356



Fits
Porsche 356A 1958 - 1959
Porsche 356B / 356C 1960 - 1965

Product information:
Product information:
The padding mat is fitted between the topping and headliner. It is designed to act as insulation and to give the hood its shape.

Please select a colour for your headliner, because the padding's edge binding will be produced in the same colour as the headliner.

Material:
Foam and cotton

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456109301

The product you are viewing cross references to these numbers

Convertible top latch.
Includes one latch and one hook; two sets are required per vehicle. Mounting screws are not included.

OE Match convertible top latch for Porsche 356 Speedster, Convertible, and Roadster models. Precision-engineered to match the original hardware, this durable latch securely locks the roof in place, ensuring a tight fit, quiet cabin, and authentic look. It consists of a latch and hook assembly — usually two per car (one each side) — that engage when the top is closed.

Fits:
Porsche 356 A 1950 - 1959  Speedster  

Porsche 356B/356C  1960 - 1965  Roadster 
F 86 831 >> 87 825

Diagram ref no 5

Original latches can wear, corrode, or lose their precise fit over time, leading to top sloppiness, wind noise, or failure to stay closed. A failed catch may cause the top to lift or move while driving, risking damage or safety issues. Installing a well-made OE-Match catch restores correct tension, function, and peace of mind on the road.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

54056189000

The product you are viewing cross references to these numbers

Tenax chrome-plated female button for Porsche 356 Cabriolet and 911 Targa
Hood cover tenax fastener. Price is each.



Fits:
Porsche 356 B Cabriolet from 1960 to 1963 - Quantity required for 356: 12
Porsche 356 C Cabriolet from 1964 to 1965 - Quantity required for 356: 12

Porsche 911 Targa from 1967 to 1971 - Quantity required for 911: 13
Porsche 912 Targa from 1967 to 1969 - Quantity required for 911: 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959160112

The product you are viewing cross references to these numbers

Tenax chrome-plated male stud M5 x 100 for Porsche 356 Cabriolet and 911 Targa  Price is each 

Fits:

Porsche 356 preA - 1950–1955
Porsche 356 A T1 - 1955–1957
Porsche 356 A T2 - 1958–1959
Porsche 356 B T5 - 1960–1961
Porsche 356 B T6 - 1962–1963
Porsche 356 C - 1964–1965/66
Porsche 911 - 1965-1969
Porsche 912 - 1965–1969

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959160412

The product you are viewing cross references to these numbers

Tenax chrome-plated male stud for Porsche 356 Cabriolet and 911 Targa
Hood cover tenax fastener. Price is each.



Fits:
Porsche 356 B Cabriolet from 1960 to 1963 - Quantity required for 356: 12
Porsche 356 C Cabriolet from 1964 to 1965 - Quantity required for 356: 12

Porsche 911 Targa from 1967 to 1971 - Quantity required for 911: 13
Porsche 912 Targa from 1967 to 1969 - Quantity required for 911: 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959160212

The product you are viewing cross references to these numbers

Tenax Fasteners, Stud, Chrome.
Size: 4.2mm x 16mm
Finish: Chrome Plated Stainless Steel
Restore the secure fit and authentic appearance of your Porsche soft top, tonneau cover, or interior trim with this OE Match Chrome Tenax Fastener Stud. Produced to OE-style specifications, this precision-engineered fastening stud provides a reliable attachment point for Tenax fasteners used throughout classic Porsche models. Manufactured from high-quality steel with a durable chrome-plated finish, it offers excellent resistance to corrosion, wear, and weathering while maintaining the original factory appearance. Ideal for restoration projects, routine maintenance, or replacing missing or damaged fasteners, this stud ensures a secure and dependable connection.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) RS 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 993 (911) TURBO 1994-96
• Porsche 993 (911) GT2 1994-97
• Porsche 993 (911) TURBO S 1994-97
• Porsche 356 1950-55
• Porsche 356A 1955-59
• Porsche 356B 1959-63
• Porsche 356C 1963-65  

Please note:
Will work perfectly with :
- Chrome Cap, part number SMC000949 and
- Brass Cap, part number SMC001949

This is the same as part number 99959159702/2, but longer.

Diagram Ref No 35

The Tenax fastener stud forms the fixed part of the Tenax fastening system, allowing compatible Tenax sockets to lock securely into place with a simple push-fit action while enabling quick release when required. Commonly used to secure convertible roofs, tonneau covers, hood covers, side curtains, and trim panels, the chrome-plated stud is designed to withstand repeated use and exposure to the elements. Manufactured to OE-style dimensions, it provides an accurate fit for straightforward installation and dependable long-term performance.  

What This Product Does:

• Provides a secure mounting point for Tenax fasteners.
• Holds convertible tops, tonneau covers, and trim panels firmly in place.
• Allows quick attachment and release of compatible Tenax sockets.
• Restores the original appearance of the fastening system.
• Resists corrosion, weathering, and everyday wear.
• Replaces damaged, worn, or missing fastening studs.
• Provides an OE-style fit for straightforward installation.

Symptoms Of Wear Or Failure:

• Missing Tenax fastener stud.
• Loose or insecure hood, tonneau cover, or trim.
• Corrosion or rust on the chrome finish.
• Worn or damaged locking head.
• Difficulty securing the Tenax socket.
• Excessive movement of attached covers or trim.
• Damaged mounting threads.
• Visible deterioration during restoration or maintenance.

Why Replacement Matters:

• The Tenax fastener stud is an essential component of the fastening system used to securely retain soft tops, tonneau covers, and interior or exterior trim. A worn, corroded, or damaged stud can allow covers to become loose, create unwanted movement or vibration, and detract from the vehicle's original appearance. In severe cases, an insecure fastening may result in damage to the attached cover or trim during driving.
• Replacing a worn or damaged component with this OE Match Chrome Tenax Fastener Stud restores secure fastening, maintains the original factory appearance, and ensures reliable operation of the Tenax fastening system. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match Chrome Tenax Fastener Stud provides reliable fit, durability, and long-lasting performance for Porsche maintenance, repairs, and restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959159802

The product you are viewing cross references to these numbers