Sforza

SFORZA Extended Swan Neck Rear Wing Risers in Carbon Fibre – Sold as a Pair

Give the rear aero package of your Porsche 992.1 GT3 a more aggressive, GT3 Cup-inspired appearance with the SFORZA Extended Carbon Fibre Swan Neck Rear Wing Risers.         

Fits:

• Porsche 992.1 GT3 4.0L 4.0L 2021-24       

Developed and manufactured in Italy, these extended risers raise the rear wing approximately 7cm compared with the original Porsche GT3 metallic wing risers. The increased height creates a significantly more purposeful motorsport stance while being designed to increase aerodynamic load over the rear axle.

Manufactured from pre-preg carbon fibre using high-temperature and high-pressure autoclave moulding, the risers combine functional aerodynamic intent with the striking appearance of exposed carbon fibre.

GT3 Cup-Inspired Swan Neck Design

Inspired by the rear wing configuration of the Porsche GT3 Cup, the SFORZA extended risers reposition the wing approximately 7cm higher than the standard GT3 setup.

The elevated position gives the 992.1 GT3 a more track-focused appearance while allowing the rear wing to operate in a different airflow position, with the design intended to increase aerodynamic loading over the rear axle.

Combined with their exposed carbon fibre construction, the risers provide a substantial visual upgrade over the standard metallic components.

Pre-Preg Autoclave Carbon Fibre Construction

The SFORZA swan neck risers are manufactured in Italy from 200 g/m² 2x2 twill pre-preg carbon fibre and autoclave moulded under high temperature and pressure.

A gloss clear coat completes the components, showcasing the exposed carbon weave and creating a premium finish that complements other carbon fibre components fitted to the Porsche 992 GT3.

Compatible with OEM & SFORZA GT3 Rear Wings

One of the key advantages of the SFORZA Extended Swan Neck Risers is their versatility.

They can be fitted with the original Porsche 992.1 GT3 rear wing, allowing owners to retain the factory wing blade while adding the increased height and exposed carbon construction of the SFORZA risers.

Alternatively, they can be combined with the SFORZA Extended Carbon Fibre Rear Wing to create a complete, more aggressive carbon fibre rear aero package.

Neither configuration requires modification to the compatible rear wing.

Extended Carbon Wing Risers for Porsche 992 GT3

For owners searching for extended Porsche 992 GT3 wing risers, the SFORZA design provides a combination of GT3 Cup-inspired styling, exposed carbon fibre construction and increased rear wing height.

The 7cm increase creates a noticeably more aggressive silhouette than the standard Porsche GT3 metallic risers, making these an ideal choice for owners developing a track-inspired or carbon-focused 992.1 GT3.

Approximate set weight: 2,300g

Professional installation is recommended to ensure correct assembly, alignment and fitment.

Road Use & Homologation

TÜV and ABE homologation documents are not supplied with this product.

Such documentation may be required for legal road use or vehicle approval in certain countries, including Germany, Austria and Switzerland. Customers should check the applicable local regulations before purchasing or installing the components for road use.

Why Choose SFORZA Carbon Fibre Swan Neck Risers?

The SFORZA Extended Swan Neck Risers provide more than a cosmetic replacement for the standard Porsche components. Their GT3 Cup-inspired design raises the wing approximately 7cm and is intended to increase rear axle aerodynamic loading while giving the 992.1 GT3 a significantly more purposeful motorsport appearance.

With pre-preg autoclave carbon construction, exposed 2x2 twill weave and compatibility with both OEM and SFORZA rear wings, they provide a premium upgrade for the Porsche 992 GT3 rear aero package.

SFORZA Extended Carbon Fibre Rear Wing Without End Plates - 22cm

Take the aerodynamic presence of the Porsche 992.1 GT3 to the next level with the SFORZA Extended Carbon Fibre Rear Wing, developed and manufactured in Italy as a more aggressive and functional alternative to the standard GT3 rear wing.
                     
Fits:

• Porsche 992.1 GT3 4.0L 4.0L 2021-24       

The SFORZA wing width is extended by 22cm compared with the OEM Porsche 992 GT3 wing. The increased span is designed to generate greater aerodynamic load over the rear axle, contributing to improved stability at higher speeds while creating a significantly more purposeful motorsport-inspired appearance.

Manufactured from premium pre-preg carbon fibre using high-temperature and high-pressure autoclave moulding, the wing combines lightweight construction, excellent structural quality and a beautifully finished exposed carbon weave.

Pre-Preg Autoclave Carbon Fibre Construction

SFORZA manufactures the extended GT3 rear wing in Italy using 200 g/m² 2x2 twill carbon fibre fabric and pre-preg autoclave technology.

The finished component receives a gloss clear coat that showcases the exposed carbon weave and provides the premium appearance expected from a high-quality carbon fibre upgrade for the Porsche 992 GT3.

22cm Extended Wing Profile

The defining feature of the SFORZA rear wing is its increased width. At 22cm wider than the standard OEM Porsche GT3 wing, the extended profile provides both a significant visual transformation and a functional aerodynamic benefit.

The larger wing surface is designed to increase aerodynamic loading on the rear axle, helping improve high-speed stability. Visually, the additional width creates a stronger track-focused stance that suits the motorsport character of the 992.1 GT3.

OEM GT3 Riser Compatibility

Despite its increased dimensions, the SFORZA Extended Carbon Fibre Rear Wing has been engineered to fit directly onto the original Porsche 992 GT3 wing risers without modification.

For owners looking to develop the appearance further, the wing can also be combined with optional SFORZA extended carbon fibre wing risers, creating a more comprehensive carbon fibre rear aero package.

Aerodynamic Upgrade for the Porsche 992.1 GT3

The Porsche 992 GT3 already features an aerodynamically focused exterior, and the SFORZA extended rear wing builds on this foundation with a larger carbon fibre wing profile.

For owners looking for a Porsche 992 GT3 extended rear wing, track-inspired carbon fibre spoiler or a more aggressive alternative to the OEM GT3 wing, the SFORZA design combines functional aerodynamic intent with premium Italian carbon fibre construction.

Professional installation is recommended to ensure correct assembly, alignment and fitment.

Road Use & Homologation

TÜV and ABE homologation documents are not supplied with this product.

Such documentation may be required for legal road use or vehicle approval in certain countries, including Germany, Austria and Switzerland. Customers should confirm applicable local regulations before purchasing or installing the component for road use.

Why Choose the SFORZA Extended GT3 Rear Wing?

The SFORZA Extended Carbon Fibre Rear Wing is designed for Porsche 992.1 GT3 owners looking for more than a purely cosmetic carbon fibre replacement.

Its 22cm extended profile delivers a significantly more aggressive appearance while being designed to increase rear axle aerodynamic loading and improve high-speed stability. Combined with pre-preg autoclave construction, exposed 2x2 twill carbon and OEM riser compatibility, it creates a premium aerodynamic upgrade for the 992 GT3.

Gloss Carbon Fibre Front Bonnet Hood 

Transform the front of your Porsche 992.1 GT3 with the SFORZA Carbon Fibre Front Bonnet Hood, combining premium Italian manufacturing with exposed carbon fibre and a finish designed to complement the motorsport character of the GT3.

Fits:

• Porsche 992.1 GT3 4.0L 4.0L 2021-24       

Manufactured in Italy from pre-preg carbon fibre using high-temperature and high-pressure autoclave moulding, the bonnet features 200 g/m² 2x2 twill carbon fabric for a premium, consistent appearance.

The exterior surface is finished in a gloss clear coat to showcase the exposed carbon weave, while the interior skin receives a contrasting matte clear coat for a clean and purposeful finish on both sides of the panel.

Pre-Preg Autoclave Carbon Fibre Construction

SFORZA manufactures the bonnet using pre-preg carbon fibre and autoclave technology, a process widely associated with high-performance automotive and motorsport carbon components.

The result is a beautifully finished carbon fibre body panel designed specifically for the Porsche 992.1 GT3.

Gloss Exterior & Matte Carbon Interior

Unlike carbon fibre panels focused solely on exterior appearance, the SFORZA bonnet is finished on both surfaces.

The exterior receives a high-gloss clear coat that emphasises the depth and detail of the 2x2 twill carbon weave, creating a striking contrast against the painted bodywork of the 992 GT3.

On the underside, a matte clear coat provides a more technical and understated finish, maintaining the exposed carbon appearance when the bonnet is open.

Front Air Ducts

Please note that the front air ducts are not supplied with the SFORZA carbon fibre bonnet.

The original air ducts can be transferred from the factory bonnet during installation. Alternatively, replacement ducts can be purchased separately from Porsche if owners prefer to retain their complete original bonnet assembly.

Exterior finish: Gloss clear coat
Interior finish: Matte clear coat
Front air ducts: Not included

Professional installation by an experienced Porsche specialist or bodyshop is recommended to ensure correct alignment, transfer of the required components and final fitment.

Italian-Made Carbon Fibre for the Porsche 992 GT3

Manufactured in Italy to SFORZA's high quality standards, this bonnet is designed for Porsche owners looking to introduce a substantial exposed carbon fibre element to the front of their 992.1 GT3.

The 2x2 twill weave pairs particularly well with other carbon fibre exterior components, allowing owners to build a more cohesive carbon-focused specification across the car.

Road Use & Homologation

TÜV and ABE homologation documents are not supplied with this product.

Such documentation may be required for legal road use or vehicle approval in certain countries, including Germany, Austria and Switzerland. Customers should confirm their local regulations before purchasing or installing the bonnet for road use.

Why Choose the SFORZA Carbon Fibre Bonnet?

For owners searching for a carbon fibre bonnet for the Porsche 992.1 GT3, the SFORZA bonnet combines pre-preg autoclave construction with premium exposed carbon detailing and Italian manufacturing.

Key advantages include:

• Porsche 992.1 GT3-specific application
• Pre-preg autoclave carbon construction
• Premium 2x2 twill weave
• Gloss exposed carbon exterior
• Matte carbon interior
• Approximate 6.3kg varnished weight
• Original air ducts can be transferred
• Manufactured in Italy
• Dramatic motorsport-inspired appearance