Crankcase Parts

Front crankshaft seal.



Fits:
Porsche 957 Cayenne 3.0L DIESEL 2009-10
Porsche 958 Cayenne 3.0L DIESEL 2011>>
Porsche 958 Cayenne 3.0L HYBRID 2011>>
Porsche MACAN 3.0L V6 TDI 2014>>
Porsche 970 Panamera 3.0L DIESEL 2012>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95510105200

The product you are viewing cross references to these numbers

Knock Sensor.
Restore accurate combustion monitoring and dependable engine management with this Porsche Knock Sensor, part number 95890537700. Designed for compatible Porsche applications, the knock sensor is an important part of the engine management system, detecting abnormal combustion vibrations and allowing the ECU to adjust ignition timing when necessary.  

Fits:

Diagram Ref No 21

During normal operation, the engine management system aims to achieve efficient combustion while protecting the engine from detonation, also known as engine knock or pinging. A knock sensor monitors characteristic vibrations within the engine and sends this information to the ECU. If knock is detected, the ECU can modify ignition timing and other applicable parameters to reduce potentially damaging combustion.

A faulty sensor can provide inaccurate information or no signal at all. The ECU may respond by using a more conservative engine strategy, potentially resulting in reduced performance, increased fuel consumption or an illuminated engine-management warning light.

The Porsche Knock Sensor 95890537700 provides the correct replacement solution for a failed or damaged sensor, helping restore accurate knock detection and proper engine-management operation.

What This Product Does:

• Detects vibrations associated with abnormal combustion or detonation.
• Sends knock information to the engine control unit.
• Allows the ECU to adjust ignition timing when knock is detected.
• Helps protect the engine from potentially harmful detonation.
• Supports optimum ignition timing under changing operating conditions.
• Helps the engine adapt to variations in load and operating conditions.
• Contributes to smooth and efficient combustion.
• Supports consistent engine performance.
• Helps maintain the intended balance between performance and engine protection.
• Replaces a failed, damaged or unreliable knock sensor.
• Restores correct input to the engine-management system.  

Symptoms Of Wear Or Failure:

• Check engine or engine-management warning light.
• Knock sensor-related diagnostic fault codes.
• Reduced engine power.
• Sluggish acceleration.
• Poor throttle response.
• Engine operating in a reduced-performance or protective strategy.
• Increased fuel consumption.
• Rough or inconsistent engine operation.
• Audible pinging or knocking under acceleration or load.
• Intermittent engine-management faults.
• Wiring or connector damage around the sensor.
• Diagnostic readings indicating an implausible or missing knock sensor signal.  

Why Replacement Matters:

• Detonation occurs when combustion within the cylinder does not proceed in the intended controlled manner. Instead, abnormal pressure waves can develop, producing the characteristic phenomenon known as engine knock.
• Persistent or severe knock can subject pistons, cylinder walls, bearings and other internal engine components to unusually high mechanical and thermal loads. The knock monitoring system helps protect against this by allowing the ECU to respond quickly when abnormal combustion is detected.
• If a knock sensor fails, the ECU may no longer receive reliable information about combustion vibration. Depending on the engine-management strategy, it may compensate by retarding ignition timing or otherwise restricting performance to provide a greater safety margin.
• This can result in noticeably reduced power or efficiency even though the engine continues to run.
• Conversely, an inaccurate sensor signal can interfere with the ECU's ability to optimise ignition timing correctly.
• Replacing a defective component with the correct Porsche Knock Sensor 95890537700 helps restore accurate combustion monitoring, appropriate ignition control and the engine protection strategy designed into the vehicle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95890537700

The product you are viewing cross references to these numbers

Knock Sensor.

Restore accurate combustion monitoring and dependable engine-management operation with this OE Match Knock Sensor. Designed for compatible Porsche applications, the knock sensor monitors engine vibrations associated with abnormal combustion, allowing the engine control unit (ECU) to respond when detonation or engine knock is detected.

Fits:

Diagram Ref No 21

During normal operation, the ECU continually adjusts engine parameters to achieve an effective balance between performance, efficiency and engine protection. The knock sensor plays an important role in this process by detecting characteristic vibration frequencies produced when combustion does not occur as intended.

When knock is detected, the ECU can adjust ignition timing and other applicable operating parameters to reduce detonation. This helps protect internal engine components from the excessive pressure and temperature associated with prolonged engine knock.

A faulty knock sensor may provide an incorrect, intermittent or missing signal. This can trigger an engine-management warning and may cause the ECU to adopt more conservative ignition settings, potentially resulting in reduced performance or efficiency.

This OE Match Knock Sensor provides a high-quality replacement for a defective or damaged original sensor, helping restore accurate knock detection and correct engine-management response.

What This Product Does:

• Detects engine vibrations associated with detonation or abnormal combustion.
• Sends combustion vibration information to the ECU.
• Helps the engine-management system identify engine knock.
• Allows ignition timing to be adjusted when knock is detected.
• Helps protect internal engine components from damaging detonation.
• Supports optimum ignition timing under changing operating conditions.
• Helps maintain smooth and efficient combustion.
• Supports consistent engine performance and throttle response.
• Allows the ECU to adapt appropriately to engine load and operating conditions.
• Replaces a failed, damaged or unreliable knock sensor.
• Provides an OE Match alternative for compatible Porsche applications.  

Symptoms Of Wear Or Failure:

• Check engine or engine-management warning light.
• Knock sensor-related diagnostic trouble codes.
• Reduced engine power. Sluggish acceleration.
• Poor or inconsistent throttle response.
• Engine entering a reduced-performance or protective operating strategy.
• Increased fuel consumption.
• Rough or inconsistent engine operation.
• Audible pinging or knocking during acceleration.
• Knock particularly noticeable under heavy engine load.
• Intermittent engine-management warnings.
• Damaged knock sensor wiring or connector.
• Diagnostic testing showing an implausible, intermittent or missing sensor signal.  

Why Replacement Matters:

• Engine knock or detonation occurs when combustion inside the cylinder becomes abnormal, creating uncontrolled pressure waves rather than the intended smooth combustion process.
• Persistent detonation can expose pistons, bearings, cylinder walls and other internal engine components to increased mechanical and thermal stress. Severe or prolonged knock can potentially contribute to expensive internal engine damage.
• The knock sensor helps prevent this by giving the ECU the information needed to identify abnormal combustion and make appropriate ignition adjustments.
• If the sensor fails or sends unreliable information, the ECU may no longer be able to determine accurately whether knock is occurring. Depending on the engine-management strategy, it may compensate by using conservative ignition timing to provide additional engine protection.
• While this can reduce the risk of damage, it may also result in reduced power, poorer throttle response and increased fuel consumption.
• A defective sensor can also create persistent diagnostic faults or warning lights, making it more difficult to identify other genuine engine-management problems.
• Replacing a failed sensor with this OE Match Knock Sensor helps restore accurate combustion monitoring, appropriate ignition control and the engine protection functions built into the management system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95890537700

The product you are viewing cross references to these numbers

Loctite SI 5900 flange sealant,
50ml

Fits:
Porsche 95B Macan - 2014 to 2018
Porsche 958 Cayenne - 2011 to 2018
Porsche 970 Panamera - 2010 to 2016

LOCTITE® SI 5900 has typical applications that include stamped sheet metal covers where good oil resistance and high joint movement is required. It also has an excellent adhesion profile to an outstanding wide variety of plastic substrates as well as glass, ceramics and metals.

Product benefits:
•   Good oil resistance
•   Withstands joint movement
•   Reduces migration of liquid after application

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004330560

The product you are viewing cross references to these numbers

Magnetic oil drain plug. M 14 x 1.5

Fits:
Porsche 958 Cayenne 3.0L Diesel 2012-18
Porsche 9YA Cayenne 3.0L / S 2.9L 2018>>
Porsche 9YA Cayenne 4.0 V8 Turbo 2018>>
Porsche 970 Panamera 3.0L Diesel 2012-16
Porsche 971 Panamera 3.0L / S 2.9L 2017>>
Porsche 971 Panamera 4.0L V8 Diesel 2017>>
Porsche 971 Panamera 4.0L V8 Turbo 2017>>
Porsche 95B Macan V6 TDI 3.0L 2014-18

Diagram ref no 30

A magnetic sump oil drain plug is a type of oil drain plug that contains a small magnet designed to attract and capture metallic particles that may be present in your engine's oil. While this type of drain plug is not exclusive to Porsche and can be used in various vehicles, it can provide several benefits, including:

Improved Engine Longevity: The magnet in the drain plug helps to capture tiny metal particles, such as iron, steel, or aluminum, that may circulate in the engine oil. Removing these particles can reduce wear and tear on engine components, potentially extending the engine's lifespan.

Enhanced Engine Performance: By reducing the presence of contaminants in the oil, a magnetic drain plug can help maintain the oil's lubricating properties, which is crucial for smooth engine operation. Clean oil can also contribute to improved fuel efficiency.

Early Detection of Problems: As the magnetic drain plug collects metallic debris, it can serve as an early warning system. By inspecting the drain plug during oil changes, you can get an idea of the engine's condition and detect any unusual wear or damage before it becomes a major issue.

Reduced Maintenance Costs: Regularly inspecting and cleaning a magnetic drain plug can prevent larger issues from developing over time. Addressing potential problems early can save you money on more extensive repairs down the road.

Peace of Mind: Knowing that you are taking steps to protect your engine from premature wear and tear can give you peace of mind as a vehicle owner. It's a relatively inexpensive and simple modification that can provide added assurance.

Easy Installation: Magnetic drain plugs are typically straightforward to install. They often replace the existing drain plug and require no special tools or modifications.

While magnetic drain plugs can offer these benefits, it's essential to remember that they are not a substitute for regular oil changes and proper maintenance. Regular oil changes with the appropriate oil and filter are still crucial for the health and longevity of your engine. Additionally, magnetic drain plugs may not capture all types of contaminants, so they should be seen as a supplementary measure rather than a comprehensive solution.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF911679

The product you are viewing cross references to these numbers

O-ring crankcase housing 12 X 3. 



Fits:
Porsche 987.2 Boxster - 2009 to 2012
Porsche 981 Boxster - 2012 to 2016
Porsche 718 Boxster - 2017 Onwards
Porsche 987.2 Cayman - 2009 to 2012
Porsche 981 Cayman - 2013 to 2016
Porsche 718 Cayman - 2017 Onwards
Porsche 997.2 - 2009 to 2012
Porsche 991 - 2012 to 2019
Porsche 95B Macan - 2014 to 2017
Porsche 970 Panamera - 2009 to 2016
Porsche 958 Cayenne - 2010 to 2017

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF008270

The product you are viewing cross references to these numbers

Rear Main Crankshaft Oil Seal. 
The Genuine Porsche Rear Main Crankshaft Oil Seal is an original equipment engine sealing component designed to provide a reliable oil-tight seal between the rear of the crankshaft and the engine block on compatible Porsche engines. Manufactured to Porsche's exact specifications for fit, sealing performance and durability, this rear main seal prevents engine oil from escaping at the crankshaft exit point while allowing smooth crankshaft rotation, ensuring optimum lubrication and long-term engine reliability.  

Fits:

• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
• Porsche 971.1 Panamera 4S Diesel V8 4.0L 4WD (422 Hp) 2017-18
• Porsche 971.1 Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo 2017-18
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18  

Diagram Ref No 39

Manufactured from premium heat-resistant elastomer with a precision-moulded sealing lip and reinforced outer casing, the seal is engineered to withstand high crankshaft speeds, continuous thermal cycling, elevated oil temperatures and prolonged exposure to engine oil. Designed as a direct replacement for the original component, it provides factory-correct fitment and dependable sealing performance, making it ideal during clutch replacement, engine rebuilds or preventative maintenance.  

What This Product Does:

• Prevents engine oil from leaking from the rear of the crankshaft.
• Maintains the integrity of the engine lubrication system.
• Provides a durable seal while allowing smooth crankshaft rotation.
• Helps protect the flywheel and transmission bell housing from oil contamination.
• Prevents dirt and moisture from entering the engine.
• Supports reliable engine lubrication and performance.
• Restores factory sealing performance.
• Forms an essential part of the engine sealing system.

Symptoms Of Wear Or Failure:

• Engine oil leaking between the engine and transmission.
• Oil spots beneath the rear of the engine.
• Burning oil smell caused by oil contacting hot components.
• Oil contamination inside the bell housing.
• Clutch slipping due to oil contamination (manual transmission models).
• Gradual engine oil loss.Hardened, cracked or worn sealing lip.
• Excessive oil residue around the rear of the engine.
• Persistent oil leaks despite replacing nearby gaskets.
• Reduced engine reliability due to oil loss.

Why Replacement Matters:

• The rear main crankshaft oil seal operates in one of the most demanding areas of the engine, sealing against a continuously rotating crankshaft while being exposed to high temperatures, oil pressure and constant thermal cycling. Over time, the sealing lip can harden, wear or lose elasticity, allowing engine oil to escape.
• A leaking rear main seal can contaminate the flywheel, clutch assembly or transmission bell housing, potentially leading to clutch slippage, increased repair costs and reduced engine lubrication. If left unresolved, continued oil loss can accelerate internal engine wear and compromise long-term reliability.
• Replacing a worn rear main crankshaft oil seal with a Genuine Porsche component restores factory sealing performance and helps ensure dependable engine protection. Manufactured to Porsche's exact standards, the Genuine Rear Main Crankshaft Oil Seal provides precise fitment, superior sealing efficiency and long-lasting durability, maintaining the performance, reliability and quality expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810115301

The product you are viewing cross references to these numbers

Rear Main Crankshaft Oil Seal. 
The OE MATCH Rear Main Crankshaft Oil Seal is a engine sealing component designed to provide a reliable oil-tight seal between the rear of the crankshaft and the engine block on compatible Porsche engines. This rear main seal prevents engine oil from escaping at the crankshaft exit point while allowing smooth crankshaft rotation, ensuring optimum lubrication and long-term engine reliability.  

Fits:

• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
• Porsche 971.1 Panamera 4S Diesel V8 4.0L 4WD (422 Hp) 2017-18
• Porsche 971.1 Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo 2017-18
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18  

Diagram Ref No 39

The seal is engineered to withstand high crankshaft speeds, continuous thermal cycling, elevated oil temperatures and prolonged exposure to engine oil. Designed as a replacement, it provides fitment and dependable sealing performance, making it ideal during clutch replacement, engine rebuilds or preventative maintenance.  

What This Product Does:

• Prevents engine oil from leaking from the rear of the crankshaft.
• Maintains the integrity of the engine lubrication system.
• Provides a durable seal while allowing smooth crankshaft rotation.
• Helps protect the flywheel and transmission bell housing from oil contamination.
• Prevents dirt and moisture from entering the engine.
• Supports reliable engine lubrication and performance.
• Forms an essential part of the engine sealing system.

Symptoms Of Wear Or Failure:

• Engine oil leaking between the engine and transmission.
• Oil spots beneath the rear of the engine.
• Burning oil smell caused by oil contacting hot components.
• Oil contamination inside the bell housing.
• Clutch slipping due to oil contamination (manual transmission models).
• Gradual engine oil loss.Hardened, cracked or worn sealing lip.
• Excessive oil residue around the rear of the engine.
• Persistent oil leaks despite replacing nearby gaskets.
• Reduced engine reliability due to oil loss.

Why Replacement Matters:

• The rear main crankshaft oil seal operates in one of the most demanding areas of the engine, sealing against a continuously rotating crankshaft while being exposed to high temperatures, oil pressure and constant thermal cycling. Over time, the sealing lip can harden, wear or lose elasticity, allowing engine oil to escape.
• A leaking rear main seal can contaminate the flywheel, clutch assembly or transmission bell housing, potentially leading to clutch slippage, increased repair costs and reduced engine lubrication. If left unresolved, continued oil loss can accelerate internal engine wear and compromise long-term reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810115301

The product you are viewing cross references to these numbers

Rear main seal (crankshaft oil seal) - 85 x 105 x 11. 

Fits:
Porsche 986 Boxster 2.5L 1997-99
Porsche 986 Boxster 2.7L 2000-04
Porsche 986 Boxster S 3.2L 2000-04

Porsche 987-1 Boxster 2.7L 2005-08
Porsche 987-1 Boxster S 3.4L 2005-08

Porsche 987-1 Cayman 2.7L 2005-08
Porsche 987-1 Cayman S 3.4L 2005-08

Porsche 987-2 Boxster 2.9L 2009-12
Porsche 987-2 Boxster S 3.4L 2009-12
Porsche 987-2 Boxster Spyder 3.4L 2011-12

Porsche 987-2 Cayman 2.9L 2009-12
Porsche 987-2 Cayman S 3.4L 2009-12
Porsche 987-2 Cayman R 3.4L 2012

Porsche 981 Boxster 2.7L 2012-16
Porsche 981 Boxster S 3.4L 2012-16
Porsche 981 Boxster GTS 3.4L 2015-16
Porsche 981 Boxster Spyder 3.8L 2016

Porsche 981 Cayman 2.7L 2014-16
Porsche 981 Cayman S 3.4L 2014-16
Porsche 981 Cayman GTS 3.4L 2014-16
Porsche 981 Cayman GT4 3.8L 2016

Porsche 718 (982) Boxster 2.0L 2017>>
Porsche 718 (982) Boxster T 2.0L 2020>> 
Porsche 718 (982) Boxster S 2.5L 2017>>
Porsche 718 (982) Boxster GTS 2.5L 2018-19
Porsche 718 (982) Boxster GTS 4.0L 2019>>
Porsche 718 (982) Boxster Spyder 4.0L 2019>> - Excludes RS

Porsche 718 (982) Cayman 2.0L 2017>>
Porsche 718 (982) Cayman T 2.0L 2020>> 
Porsche 718 (982) Cayman S 2.5L 2017>>
Porsche 718 (982) Cayman GTS 2.5L 2018-19
Porsche 718 (982) Cayman GTS 4.0L 2019>> 
Porsche 718 (982) Cayman GT4 4.0L 2019>> - Excludes RS   

Porsche 996-1 Carrera 3.4L 1998-01
Porsche 996-1 Carrera 4 3.4L 1999-01

Porsche 996-2 Carrera 3.6L 2002-04
Porsche 996-2 Carrera 4 3.6L 2002-04
Porsche 996-2 Carrera 4S 3.6L 2002-05
Porsche 996-2 Targa 3.6L 2002-04

Porsche 997-1 Carrera 3.6L 2005-08
Porsche 997-1 Carrera 4 3.6L 2006-08
Porsche 997-1 Carrera S 3.8L 2005-08
Porsche 997-1 Carrera 4S 3.8L 2006-08
Porsche 997-1 Targa 4 3.6L 2007-08
Porsche 997-1 Targa 4S 3.8L 2007-08

Porsche 997-2 Carrera 3.6L 2009-12
Porsche 997-2 Carrera 4 3.6L 2009-12
Porsche 997-2 Carrera S 3.8L 2009-12
Porsche 997-2 Carrera GTS 3.8L 2011-12
Porsche 997-2 Carrera 4 GTS 3.8L 2011-12
Porsche 997-2 Carrera 4S 3.8L 2009-12
Porsche 997-2 Targa 4 3.6L 2009-12
Porsche 997-2 Targa 4S 3.8L 2009-12

Porsche 997-2 Turbo / S 3.8L 2010-13

Porsche 991-1 Carrera 3.4L 2012-16
Porsche 991-1 Carrera 4 3.4L 2012-16
Porsche 991-1 Carrera S 3.8L 2012-16
Porsche 991-1 Carrera 4S 3.8L 2012-16
Porsche 991-1 Carrera GTS 3.8L 2015-16
Porsche 991-1 Carrera 4 GTS 3.8L 2016
Porsche 991-1 Targa 4 3.4L 2015-16
Porsche 991-1 Targa 4S 3.8L 2015-16
Porsche 991-1 Targa 4 GTS 3.8L 2015-16

Porsche 991-2 Carrera 3.0L 2017-19
Porsche 991-2 Carrera 4 3.0L 2017-19
Porsche 991-2 Carrera S 3.0L 2017-19
Porsche 991-2 Carrera 4S 3.0L 2017-19
Porsche 991-2 Carrera GTS 3.0L 2017-19
Porsche 991-2 Carrera 4 GTS 3.0L 2017-19
Porsche 991-2 Targa 3.0L 2017-19
Porsche 991-2 Targa 4 3.0L 2017-19
Porsche 991-2 Targa 4 GTS 3.0L 2017-19 

Porsche 991-1 Turbo 3.8L 2014-16
Porsche 991-2 Turbo 3.8L 2017-20

Porsche 992-1 Carrera 3.0L 2019-24
Porsche 992-1 Carrera T 3.0L 2023-24
Porsche 992-1 Carrera S 3.0L 2019-24
Porsche 992-1 Carrera GTS 3.0L 2022-24
Porsche 992-1 Carrera 4 3.0L 2019-24
Porsche 992-1 Carrera 4S 3.0L 2019-24
Porsche 992-1 Carrera 4 GTS 3.0L 2022-24
Porsche 992-1 Targa 4 3.0L 2019-24
Porsche 992-1 Targa 4S 3.0L 2019-24
Porsche 992-1 Targa 4 GTS 3.0L 2022-24

Porsche 992-1 Turbo / S 3.7L 2020>> 

Porsche 992-2 Carrera 3.0L 2024>>
Porsche 992-2 Carrera T 3.0L 2024>>
Porsche 992-2 Carrera S 3.0L 2024>>
Porsche 992-2 Carrera GTS T-Hybrid 3.6L 2024>>
Porsche 992-2 Carrera 4 GTS T-Hybrid 3.6L 2024>> 

Porsche 955 Cayenne S 4.5L V8 2003-06
Porsche 955 Cayenne Turbo 4.5L V8 2003-06

Porsche 957 Cayenne S 4.8L V8 2007-10
Porsche 957 Cayenne GTS 4.8L V8 2008-10
Porsche 957 Cayenne Turbo 4.8L V8 2007-10

Porsche 958-1 Cayenne S 4.8L V8 2011-14
Porsche 958-1 Cayenne GTS 4.8L V8 2011-14
Porsche 958-1 Cayenne Turbo 4.8L V8 2011-14
Porsche 958-1 Cayenne Turbo S 4.8L V8 2011-14

Porsche 958-2 Cayenne S 3.6L V6 2015-18
Porsche 958-2 Cayenne GTS 3.6L V6 2015-18
Porsche 958-2 Cayenne Turbo 4.8L V8 2015-18
Porsche 958-2 Cayenne Turbo S 4.8L V8 2015-18

Porsche 970-1 Panamera 3.6L V6 2010-13
Porsche 970-1 Panamera 4 3.6L V6 2010-13
Porsche 970-1 Panamera S 4.8L V8 2010-13
Porsche 970-1 Panamera 4S 4.8L V8 2010-13
Porsche 970-1 Panamera GTS 4.8L V8 2013
Porsche 970-1 Panamera Turbo 4.8L V8 2010-13
Porsche 970-1 Panamera Turbo S 4.8L V8 2010-13

Porsche 970-2 Panamera 3.6L V6 2014-16
Porsche 970-2 Panamera 4 3.6L V6 2014-16
Porsche 970-2 Panamera S 3.0L V6 2014-16
Porsche 970-2 Panamera 4S 3.0L V6 2014-16
Porsche 970-2 Panamera GTS 4.8L V8 2014-16
Porsche 970-2 Panamera Turbo 4.8L 2014-16
Porsche 970-2 Panamera Turbo S 4.8L 2014-16

Porsche 95B-1 Macan S 3.0L V6 2014-18
Porsche 95B-1 Macan GTS 3.0L V6 2014-18
Porsche 95B-1 Macan Turbo 3.6L V6 2014-18

Diagram ref. 5. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0PB105249

The product you are viewing cross references to these numbers

Rear main seal (crankshaft oil seal) - 85 x 105 x 11. 

Fits:
Porsche 986 Boxster 2.5L 1997-99
Porsche 986 Boxster 2.7L 2000-04
Porsche 986 Boxster S 3.2L 2000-04

Porsche 987-1 Boxster 2.7L 2005-08
Porsche 987-1 Boxster S 3.4L 2005-08

Porsche 987-1 Cayman 2.7L 2005-08
Porsche 987-1 Cayman S 3.4L 2005-08

Porsche 987-2 Boxster 2.9L 2009-12
Porsche 987-2 Boxster S 3.4L 2009-12
Porsche 987-2 Boxster Spyder 3.4L 2011-12

Porsche 987-2 Cayman 2.9L 2009-12
Porsche 987-2 Cayman S 3.4L 2009-12
Porsche 987-2 Cayman R 3.4L 2012

Porsche 981 Boxster 2.7L 2012-16
Porsche 981 Boxster S 3.4L 2012-16
Porsche 981 Boxster GTS 3.4L 2015-16
Porsche 981 Boxster Spyder 3.8L 2016

Porsche 981 Cayman 2.7L 2014-16
Porsche 981 Cayman S 3.4L 2014-16
Porsche 981 Cayman GTS 3.4L 2014-16
Porsche 981 Cayman GT4 3.8L 2016

Porsche 718 (982) Boxster 2.0L 2017>>
Porsche 718 (982) Boxster T 2.0L 2020>> 
Porsche 718 (982) Boxster S 2.5L 2017>>
Porsche 718 (982) Boxster GTS 2.5L 2018-19
Porsche 718 (982) Boxster GTS 4.0L 2019>>
Porsche 718 (982) Boxster Spyder 4.0L 2019>> - Excludes RS

Porsche 718 (982) Cayman 2.0L 2017>>
Porsche 718 (982) Cayman T 2.0L 2020>> 
Porsche 718 (982) Cayman S 2.5L 2017>>
Porsche 718 (982) Cayman GTS 2.5L 2018-19
Porsche 718 (982) Cayman GTS 4.0L 2019>> 
Porsche 718 (982) Cayman GT4 4.0L 2019>> - Excludes RS   

Porsche 996-1 Carrera 3.4L 1998-01
Porsche 996-1 Carrera 4 3.4L 1999-01

Porsche 996-2 Carrera 3.6L 2002-04
Porsche 996-2 Carrera 4 3.6L 2002-04
Porsche 996-2 Carrera 4S 3.6L 2002-05
Porsche 996-2 Targa 3.6L 2002-04

Porsche 997-1 Carrera 3.6L 2005-08
Porsche 997-1 Carrera 4 3.6L 2006-08
Porsche 997-1 Carrera S 3.8L 2005-08
Porsche 997-1 Carrera 4S 3.8L 2006-08
Porsche 997-1 Targa 4 3.6L 2007-08
Porsche 997-1 Targa 4S 3.8L 2007-08

Porsche 997-2 Carrera 3.6L 2009-12
Porsche 997-2 Carrera 4 3.6L 2009-12
Porsche 997-2 Carrera S 3.8L 2009-12
Porsche 997-2 Carrera GTS 3.8L 2011-12
Porsche 997-2 Carrera 4 GTS 3.8L 2011-12
Porsche 997-2 Carrera 4S 3.8L 2009-12
Porsche 997-2 Targa 4 3.6L 2009-12
Porsche 997-2 Targa 4S 3.8L 2009-12

Porsche 997-2 Turbo / S 3.8L 2010-13

Porsche 991-1 Carrera 3.4L 2012-16
Porsche 991-1 Carrera 4 3.4L 2012-16
Porsche 991-1 Carrera S 3.8L 2012-16
Porsche 991-1 Carrera 4S 3.8L 2012-16
Porsche 991-1 Carrera GTS 3.8L 2015-16
Porsche 991-1 Carrera 4 GTS 3.8L 2016
Porsche 991-1 Targa 4 3.4L 2015-16
Porsche 991-1 Targa 4S 3.8L 2015-16
Porsche 991-1 Targa 4 GTS 3.8L 2015-16

Porsche 991-2 Carrera 3.0L 2017-19
Porsche 991-2 Carrera 4 3.0L 2017-19
Porsche 991-2 Carrera S 3.0L 2017-19
Porsche 991-2 Carrera 4S 3.0L 2017-19
Porsche 991-2 Carrera GTS 3.0L 2017-19
Porsche 991-2 Carrera 4 GTS 3.0L 2017-19
Porsche 991-2 Targa 3.0L 2017-19
Porsche 991-2 Targa 4 3.0L 2017-19
Porsche 991-2 Targa 4 GTS 3.0L 2017-19 

Porsche 991-1 Turbo 3.8L 2014-16
Porsche 991-2 Turbo 3.8L 2017-20

Porsche 992-1 Carrera 3.0L 2019-24
Porsche 992-1 Carrera T 3.0L 2023-24
Porsche 992-1 Carrera S 3.0L 2019-24
Porsche 992-1 Carrera GTS 3.0L 2022-24
Porsche 992-1 Carrera 4 3.0L 2019-24
Porsche 992-1 Carrera 4S 3.0L 2019-24
Porsche 992-1 Carrera 4 GTS 3.0L 2022-24
Porsche 992-1 Targa 4 3.0L 2019-24
Porsche 992-1 Targa 4S 3.0L 2019-24
Porsche 992-1 Targa 4 GTS 3.0L 2022-24

Porsche 992-1 Turbo / S 3.7L 2020>> 

Porsche 992-2 Carrera 3.0L 2024>>
Porsche 992-2 Carrera T 3.0L 2024>>
Porsche 992-2 Carrera S 3.0L 2024>>
Porsche 992-2 Carrera GTS T-Hybrid 3.6L 2024>>
Porsche 992-2 Carrera 4 GTS T-Hybrid 3.6L 2024>> 

Porsche 955 Cayenne S 4.5L V8 2003-06
Porsche 955 Cayenne Turbo 4.5L V8 2003-06

Porsche 957 Cayenne S 4.8L V8 2007-10
Porsche 957 Cayenne GTS 4.8L V8 2008-10
Porsche 957 Cayenne Turbo 4.8L V8 2007-10

Porsche 958-1 Cayenne S 4.8L V8 2011-14
Porsche 958-1 Cayenne GTS 4.8L V8 2011-14
Porsche 958-1 Cayenne Turbo 4.8L V8 2011-14
Porsche 958-1 Cayenne Turbo S 4.8L V8 2011-14

Porsche 958-2 Cayenne S 3.6L V6 2015-18
Porsche 958-2 Cayenne GTS 3.6L V6 2015-18
Porsche 958-2 Cayenne Turbo 4.8L V8 2015-18
Porsche 958-2 Cayenne Turbo S 4.8L V8 2015-18

Porsche 970-1 Panamera 3.6L V6 2010-13
Porsche 970-1 Panamera 4 3.6L V6 2010-13
Porsche 970-1 Panamera S 4.8L V8 2010-13
Porsche 970-1 Panamera 4S 4.8L V8 2010-13
Porsche 970-1 Panamera GTS 4.8L V8 2013
Porsche 970-1 Panamera Turbo 4.8L V8 2010-13
Porsche 970-1 Panamera Turbo S 4.8L V8 2010-13

Porsche 970-2 Panamera 3.6L V6 2014-16
Porsche 970-2 Panamera 4 3.6L V6 2014-16
Porsche 970-2 Panamera S 3.0L V6 2014-16
Porsche 970-2 Panamera 4S 3.0L V6 2014-16
Porsche 970-2 Panamera GTS 4.8L V8 2014-16
Porsche 970-2 Panamera Turbo 4.8L 2014-16
Porsche 970-2 Panamera Turbo S 4.8L 2014-16

Porsche 95B-1 Macan S 3.0L V6 2014-18
Porsche 95B-1 Macan GTS 3.0L V6 2014-18
Porsche 95B-1 Macan Turbo 3.6L V6 2014-18

Diagram ref. 5. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0PB105249

The product you are viewing cross references to these numbers

Rear main seal (crankshaft oil seal) - 85 x 105 x 11
OE Match rear main seal / crankshaft oil seal, 85 x 105 x 11, for Porsche 986, 987, 981, 718, 996, 997, 991, 992, 955, 958, 970, and 95B.1 models. This replacement seal helps prevent engine oil leaks from the rear crankshaft area and supports correct engine sealing.

Fits:
Porsche 986 Boxster 2.5L 1997-99
Porsche 986 Boxster 2.7L 2000-04
Porsche 986 Boxster S 3.2L 2000-04

Porsche 987-1 Boxster 2.7L 2005-08
Porsche 987-1 Boxster S 3.4L 2005-08

Porsche 987-1 Cayman 2.7L 2005-08
Porsche 987-1 Cayman S 3.4L 2005-08

Porsche 987-2 Boxster 2.9L 2009-12
Porsche 987-2 Boxster S 3.4L 2009-12
Porsche 987-2 Boxster Spyder 3.4L 2011-12

Porsche 987-2 Cayman 2.9L 2009-12
Porsche 987-2 Cayman S 3.4L 2009-12
Porsche 987-2 Cayman R 3.4L 2012

Porsche 981 Boxster 2.7L 2012-16
Porsche 981 Boxster S 3.4L 2012-16
Porsche 981 Boxster GTS 3.4L 2015-16
Porsche 981 Boxster Spyder 3.8L 2016

Porsche 981 Cayman 2.7L 2014-16
Porsche 981 Cayman S 3.4L 2014-16
Porsche 981 Cayman GTS 3.4L 2014-16
Porsche 981 Cayman GT4 3.8L 2016

Porsche 718 (982) Boxster 2.0L 2017>>
Porsche 718 (982) Boxster T 2.0L 2020>> 
Porsche 718 (982) Boxster S 2.5L 2017>>
Porsche 718 (982) Boxster GTS 2.5L 2018-19
Porsche 718 (982) Boxster GTS 4.0L 2019>>
Porsche 718 (982) Boxster Spyder 4.0L 2019>> - Excludes RS

Porsche 718 (982) Cayman 2.0L 2017>>
Porsche 718 (982) Cayman T 2.0L 2020>> 
Porsche 718 (982) Cayman S 2.5L 2017>>
Porsche 718 (982) Cayman GTS 2.5L 2018-19
Porsche 718 (982) Cayman GTS 4.0L 2019>> 
Porsche 718 (982) Cayman GT4 4.0L 2019>> - Excludes RS   

Porsche 996-1 Carrera 3.4L 1998-01
Porsche 996-1 Carrera 4 3.4L 1999-01

Porsche 996-2 Carrera 3.6L 2002-04
Porsche 996-2 Carrera 4 3.6L 2002-04
Porsche 996-2 Carrera 4S 3.6L 2002-05
Porsche 996-2 Targa 3.6L 2002-04

Porsche 997-1 Carrera 3.6L 2005-08
Porsche 997-1 Carrera 4 3.6L 2006-08
Porsche 997-1 Carrera S 3.8L 2005-08
Porsche 997-1 Carrera 4S 3.8L 2006-08
Porsche 997-1 Targa 4 3.6L 2007-08
Porsche 997-1 Targa 4S 3.8L 2007-08

Porsche 997-2 Carrera 3.6L 2009-12
Porsche 997-2 Carrera 4 3.6L 2009-12
Porsche 997-2 Carrera S 3.8L 2009-12
Porsche 997-2 Carrera GTS 3.8L 2011-12
Porsche 997-2 Carrera 4 GTS 3.8L 2011-12
Porsche 997-2 Carrera 4S 3.8L 2009-12
Porsche 997-2 Targa 4 3.6L 2009-12
Porsche 997-2 Targa 4S 3.8L 2009-12

Porsche 997-2 Turbo / S 3.8L 2010-13

Porsche 991-1 Carrera 3.4L 2012-16
Porsche 991-1 Carrera 4 3.4L 2012-16
Porsche 991-1 Carrera S 3.8L 2012-16
Porsche 991-1 Carrera 4S 3.8L 2012-16
Porsche 991-1 Carrera GTS 3.8L 2015-16
Porsche 991-1 Carrera 4 GTS 3.8L 2016
Porsche 991-1 Targa 4 3.4L 2015-16
Porsche 991-1 Targa 4S 3.8L 2015-16
Porsche 991-1 Targa 4 GTS 3.8L 2015-16

Porsche 991-2 Carrera 3.0L 2017-19
Porsche 991-2 Carrera 4 3.0L 2017-19
Porsche 991-2 Carrera S 3.0L 2017-19
Porsche 991-2 Carrera 4S 3.0L 2017-19
Porsche 991-2 Carrera GTS 3.0L 2017-19
Porsche 991-2 Carrera 4 GTS 3.0L 2017-19
Porsche 991-2 Targa 3.0L 2017-19
Porsche 991-2 Targa 4 3.0L 2017-19
Porsche 991-2 Targa 4 GTS 3.0L 2017-19 

Porsche 991-1 Turbo 3.8L 2014-16
Porsche 991-2 Turbo 3.8L 2017-20

Porsche 992-1 Carrera 3.0L 2019-24
Porsche 992-1 Carrera T 3.0L 2023-24
Porsche 992-1 Carrera S 3.0L 2019-24
Porsche 992-1 Carrera GTS 3.0L 2022-24
Porsche 992-1 Carrera 4 3.0L 2019-24
Porsche 992-1 Carrera 4S 3.0L 2019-24
Porsche 992-1 Carrera 4 GTS 3.0L 2022-24
Porsche 992-1 Targa 4 3.0L 2019-24
Porsche 992-1 Targa 4S 3.0L 2019-24
Porsche 992-1 Targa 4 GTS 3.0L 2022-24

Porsche 992-1 Turbo / S 3.7L 2020>> 

Porsche 992-2 Carrera 3.0L 2024>>
Porsche 992-2 Carrera T 3.0L 2024>>
Porsche 992-2 Carrera S 3.0L 2024>>
Porsche 992-2 Carrera GTS T-Hybrid 3.6L 2024>>
Porsche 992-2 Carrera 4 GTS T-Hybrid 3.6L 2024>> 

Porsche 955 Cayenne S 4.5L V8 2003-06
Porsche 955 Cayenne Turbo 4.5L V8 2003-06

Porsche 957 Cayenne S 4.8L V8 2007-10
Porsche 957 Cayenne GTS 4.8L V8 2008-10
Porsche 957 Cayenne Turbo 4.8L V8 2007-10

Porsche 958-1 Cayenne S 4.8L V8 2011-14
Porsche 958-1 Cayenne GTS 4.8L V8 2011-14
Porsche 958-1 Cayenne Turbo 4.8L V8 2011-14
Porsche 958-1 Cayenne Turbo S 4.8L V8 2011-14

Porsche 958-2 Cayenne S 3.6L V6 2015-18
Porsche 958-2 Cayenne GTS 3.6L V6 2015-18
Porsche 958-2 Cayenne Turbo 4.8L V8 2015-18
Porsche 958-2 Cayenne Turbo S 4.8L V8 2015-18

Porsche 970-1 Panamera 3.6L V6 2010-13
Porsche 970-1 Panamera 4 3.6L V6 2010-13
Porsche 970-1 Panamera S 4.8L V8 2010-13
Porsche 970-1 Panamera 4S 4.8L V8 2010-13
Porsche 970-1 Panamera GTS 4.8L V8 2013
Porsche 970-1 Panamera Turbo 4.8L V8 2010-13
Porsche 970-1 Panamera Turbo S 4.8L V8 2010-13

Porsche 970-2 Panamera 3.6L V6 2014-16
Porsche 970-2 Panamera 4 3.6L V6 2014-16
Porsche 970-2 Panamera S 3.0L V6 2014-16
Porsche 970-2 Panamera 4S 3.0L V6 2014-16
Porsche 970-2 Panamera GTS 4.8L V8 2014-16
Porsche 970-2 Panamera Turbo 4.8L 2014-16
Porsche 970-2 Panamera Turbo S 4.8L 2014-16

Porsche 95B-1 Macan S 3.0L V6 2014-18
Porsche 95B-1 Macan GTS 3.0L V6 2014-18
Porsche 95B-1 Macan Turbo 3.6L V6 2014-18

Diagram ref. 5

The rear main seal seals the rear crankshaft exit point to prevent engine oil from leaking into the bellhousing or transmission area. A correctly fitted seal is essential for maintaining oil system integrity and keeping the clutch, flywheel, torque converter, and gearbox area free from oil contamination.

Functions
•  Replaces the rear main crankshaft oil seal
•  Helps prevent engine oil leaks from the rear crankshaft area
•  Supports correct engine oil sealing
•  Helps protect clutch, flywheel, and transmission components from oil contamination
•  Suitable for engine, clutch, flywheel, or gearbox service
•  Replaces hardened, worn, cracked, leaking, or damaged rear main seals
•  OE Match replacement for Porsche engine sealing repair.

Why Replace This Part?
Rear main seals are exposed to heat, oil pressure, crankshaft rotation, age, and engine vibration. Over time, the seal can harden, wear, crack, or lose sealing tension. A leaking rear main seal may cause oil drips between the engine and gearbox, oil contamination around the bellhousing, clutch slip on manual vehicles, burning oil smell, or failed inspection. Replacing the seal helps restore reliable engine sealing and prevents further oil leakage.

When to Replace This Part
•  Oil is leaking between the engine and gearbox
•  Rear main seal leakage is confirmed
•  The gearbox has been removed for service
•  Clutch, flywheel, or torque converter work is being carried out
•  The original seal is hardened, worn, cracked, or damaged
•  Engine rebuild or major service work is being completed
•  Preventative replacement is required while access is available.

Where it fits on the car
This seal fits at the rear of the crankshaft, between the engine and transmission area. It forms part of the engine oil sealing system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0PB105249

The product you are viewing cross references to these numbers

Shaft sealing ring. 15 x 32 x 7.



Fits:
Porsche 95B Macan 2.0L 2015-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810308510

The product you are viewing cross references to these numbers

Shaft sealing ring. 15 x 32 x 7.

Fits:
Porsche 95B Macan 2.0L 2015-18

Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810308510

The product you are viewing cross references to these numbers

Sump plug washer. A 14 x 20.



Fits:
Porsche 958 Cayenne 3.0L Diesel 2012-18
Porsche 9YA Cayenne 3.0L / S 2.9L 2018>>
Porsche 9YA Cayenne 4.0 V8 Turbo 2018>>
Porsche 970 Panamera 3.0L Diesel 2012-16
Porsche 971 Panamera 3.0L / S 2.9L 2017>>
Porsche 971 Panamera 4.0L V8 Diesel 2017>>
Porsche 971 Panamera 4.0L V8 Turbo 2017>>
Porsche 95B Macan V6 TDI 3.0L 2014-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 31

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N0138495

The product you are viewing cross references to these numbers

Oil drain plug. M 14 x 1.5



Fits:
Porsche 958 Cayenne 3.0L Diesel 2012-18
Porsche 9YA Cayenne 3.0L / S 2.9L 2018>>
Porsche 9YA Cayenne 4.0 V8 Turbo 2018>>
Porsche 970 Panamera 3.0L Diesel 2012-16
Porsche 971 Panamera 3.0L / S 2.9L 2017>>
Porsche 971 Panamera 4.0L V8 Diesel 2017>>
Porsche 971 Panamera 4.0L V8 Turbo 2017>>
Porsche 95B Macan V6 TDI 3.0L 2014-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF911679

The product you are viewing cross references to these numbers

Timing chain cover with radial seal. 

Fits:
Porsche 95B.1 Macan 2.0L 2014-18
Porsche 95B.2 Macan 2.0L 2019-21 T2G
Porsche 95B.3 Macan 2.0L 20122>> T2G

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810921000

The product you are viewing cross references to these numbers