Porsche

发动机冷却液回流软管。

适用：
保时捷 997.2 卡雷拉 2009 - 2012
保时捷 997.2 Turbo 3.8L 2010 - 2013 (A170)

图示编号 22

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99710682232

您正在查看的产品与这些编号存在交叉引用关系

Centre console side trim, Black leather.



Fits:
Porsche 986 Boxster 1999>>
Porsche 996 1999>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99655209

您正在查看的产品与这些编号存在交叉引用关系

后部刹车片。


保时捷卡宴 (9YA) 2018>>
适用于配备 18 英寸后制动盘的车辆，制动钳涂成绿色（选项代码：1KS）
适用于配备 18 英寸后制动盘、黑色漆制动钳的车辆（选配代码：2EI）
适用于配备 19 英寸后制动盘的车辆，制动钳涂成黑色（选项代码：1KU）
适用于配备 19 英寸后制动盘的车辆，制动钳涂成红色（选项代码：2EN）


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9Y0698451AE

您正在查看的产品与这些编号存在交叉引用关系

前轮刹车盘。


保时捷 9YA Cayenne 2018>> 前部
适用于配备 18 英寸前刹车盘的汽车，刹车卡钳涂成黑色（RoW）（选装代码：1ZR）
适用于配备 18 英寸前刹车盘的汽车，刹车卡钳涂成黑色 (NAR)（选装代码：1ZS）

保时捷 9YA Cayenne E-Hybrid 2018>> 前部
适用于配备 18 英寸前刹车盘的汽车，刹车卡钳涂成绿色（选装代码：1ZJ）
适用于配备 18 英寸前刹车盘、绿色刹车卡钳的北美车型（选装代码：1ZB）

请注意：原厂刹车盘和刹车片并非库存商品，需特殊订购。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9Y061530

您正在查看的产品与这些编号存在交叉引用关系

Cable foot operated parking brake, Front, RHD cars.



Fits:
Porsche 955 Cayenne 2003-06 RHD cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95542314111

您正在查看的产品与这些编号存在交叉引用关系

Door sill support. 



Fits:
Porsche 996 Carrera 1998-05
Porsche 996 Turbo 2001-05
Porsche 996 GT3 1999-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9965516

您正在查看的产品与这些编号存在交叉引用关系

Power steering centre pressure line.



Fits:
Porsche 996 Carrera 2002-05
Porsche 996 Turbo 2001-05
Porsche 996 GT3 2001-05

Click 'Zoom in' for large parts diagram
Diagram ref no 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634754553

您正在查看的产品与这些编号存在交叉引用关系

Air con refrigerant suction hose, NW16.



Fits:
For RHD cars only
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12
Porsche 996 all models 1998-05
Porsche 997.1 all models 2005-08
Porsche 997.2 all models 2009-12
Porsche 987C.1 Cayman 2005-08
Porsche 987C.2 Cayman 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99657309307

您正在查看的产品与这些编号存在交叉引用关系

911 GT3 Manthey Kit. For vehicles with a 20/21-inch Manthey lightweight wheel set.



Fits:
Porsche 992 GT3 - 2021 Onwards

911 GT3 Manthey Kit

The Manthey Kit offers comprehensive optimisation of the race track characteristics of the 911 GT3 (Type 992). In close cooperation with the engineers from Porsche and Manthey, the specifications of the vehicle have been specifically coordinated for use on the race track and at track days. For Porsche works driver Kévin Estre, this means a lap time of 6:55.737 minutes for the 20.8 kilometres of the Nürburgring Nordschleife. And for all other drivers: even better handling, even faster cornering speeds and even more adrenaline.

Improvements were achieved through the use of new aerodynamic and chassis components, modifications to the brake system and the optionally available Manthey lightweight wheel set. The 911 GT3 Manthey Kit is the result of decades of experience in GT sport, complex aerodynamic simulations and countless test kilometres on the Nürburgring Nordschleife. In addition, all components have been intensively matched and tested on the driving dynamics test bench and in the high-performance wind tunnel of the Porsche Development Centre in Weissach.

Aerodynamics package
In keeping with the principle of "form follows function", the aerodynamics of the vehicle have been modified and its design has been further honed: A new, larger lip is used at the front of the vehicle, The combination of its optimised geometry, the characteristic flaps and the additional air baffle elements on the underbody increases the downforce at the front axle by approx. 30%. The downforce on the rear axle is increased by around 45% by the new flow-optimised rear diffuser with longer fins in combination with the larger rear wing made of exposed carbon fibre. The rear wing features an angled blade as well as enlarged side plates painted with the Manthey logo. The aerodynamics package is completed by the carbon aerodiscs on the rear wheels. These reduce turbulence at the rear end and are available with a decorative film to match the colour of the vehicle’s exterior or wheel rims. Overall, the aerodynamics package significantly improves vehicle handling and thus contributes significantly to the performance of the 911 GT3.

Coilover suspension
Extensive testing was performed on the race track and driving dynamics test bench to develop a set-up for the coilover suspension (available with and without a front axle lift system) that leaves no wish unfulfilled in terms of performance, driveability or comfort. For example, the all-aluminium spring struts feature four-way adjustability of the damping force. The lightweight components allow ultra-precise adaptation to the respective track conditions and individual driver preferences. The damping force can be adjusted with easy accessibility and without tools in both the compression and rebound stages for low and high speed settings. The moderately adapted spring rates (+10% on the front axle, -7% on the rear axle) mean that the handling and balance of the 911 GT3 have been further optimised.

Brake line set with steel sleeve
The brake line set with steel sleeve ensures even more direct pedal feedback and a faster response time as a result. This component of the Kit was also tested and co-developed by Manthey on the Nürburgring Nordschleife.

The brake system of the 911 GT3 can optionally be fitted with racing brake pads. These pads were developed specifically for race track use and improve the fading characteristics as well as responsiveness and control. The brake pads are characterised by constant friction behaviour over a wide temperature range and very good wear behaviour with low disc wear.

Additional equipment
Two red towing loops are included in delivery for race track use. These are bolted onto the designated coils on the front and rear ends and must be removed again before driving on public roads.

As additional visual highlights, the 911 GT3 Manthey Kit includes new illuminated door entry guards in matte carbon with the Manthey logo in red and white. The LED door projectors in the side door exit lights project a white Manthey logo on both driver's and passenger's sides. The Manthey logo can also be applied to the vehicle doors in white or black.

Wheel set
The Manthey Kit is compatible with both the 20/21-inch 911 GT3 wheel set (standard gear wheel set) and the 20/21-inch 911 Manthey lightweight wheel set (available without tyres, valve and tyre pressure monitoring system sensor).

In order to further reduce the overall weight of the already lightweight-designed vehicle, the design of the standard wheel was technologically optimised with the 20/21-inch 911 Manthey lightweight wheel set. The result: A reduction in the springless and rotating masses by 16.1 lbs. (7.3 kg) per vehicle set, which significantly benefits the responsiveness of the spring/damper elements and further improves vehicle control.

The 20/21-inch 911 GT3 wheel set is available in the following paint finishes:

- Brilliant Silver

- Black (satin-gloss)

- Dark Silver

The 20/21-inch 911 Manthey lightweight wheel set is available in the following paint finishes:

- Brilliant Silver

- Black (satin-gloss)

- Dark Silver

- Neodyme

The wheel sets are suitable for the corresponding tyre sizes:

Front axle: 9.5J x 20 RO 46 with 255/35 ZR 20 (97Y) XL tyres

Rear axle: 12 J x 21 ET 45 with 315/30 ZR 21 (105Y) XL tyres.

Porsche recommends using Michelin Pilot Sport Cup 2 R tyres.

Note: Approval for road use and warranty are unaffected. The individual components of the 911 GT3 Manthey Kit are precisely matched. For this reason, they must only be installed together on the vehicle. Individual offers are shown separately. For further information, please contact your Porsche Centre.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

992044855

您正在查看的产品与这些编号存在交叉引用关系

Drop link rear. Porsche 911 1978-89 / 930 1978-89 (93033307101, 93033307201)



Fits:
Porsche 911 1978-89
Porsche 930 Turbo 3.3L 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 12.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033307

您正在查看的产品与这些编号存在交叉引用关系

泡沫密封前扭力杆调节器。



適用於:
保时捷 911 - 1965 年至 1989 年
保时捷 911 Turbo - 1975 年至 1989 年

单击“放大”可查看大部件图。
图表参考编号 21

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90134147500

您正在查看的产品与这些编号存在交叉引用关系

Wishbone front (A-Frame)



Fits:
Porsche 911 - 1974 to 1989


Click 'Zoom in' to see the diagram.
Diagram Ref No 14

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134190

您正在查看的产品与这些编号存在交叉引用关系

Wishbone front (A-Frame)



Fits:
Porsche 911 - 1969 to 1973
Porsche 914/6 - 1970 to 1976

Click 'Zoom in' to see the diagram.
Diagram Ref No 12.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134190

您正在查看的产品与这些编号存在交叉引用关系

Seal ring washer. Size - A10 x 13.5



Fits:
Porsche 911 - 1978 to 1989
Porsche 964 - 1989 to 1994
Porsche 996 - 1998 to 2005
Porsche 997.1 - 2005 to 2008
Porsche 986 Boxster - 1997 to 2004
Porsche 928 - 1978 to 1995
Porsche 958 Cayenne - 2011 to 2018
Porsche 970 Panamera - 2010 to 2016
Porsche 95B Macan - 2014 to 2018

Aluminium seal washer - has various applications depending on model

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90012314430

您正在查看的产品与这些编号存在交叉引用关系

Selector lever. New old stock. Discontinued by Porsche. Only one piece left.



Fits:
Porsche 928 4.5L 78-82 with automatic transmission


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92242417301

您正在查看的产品与这些编号存在交叉引用关系

前下控制臂。

适用：
保时捷 955 卡宴 MKI 2003-06
保时捷 957 Cayenne MKII 2007>>

图示编号 4。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95534101

您正在查看的产品与这些编号存在交叉引用关系