伦林

Rennline Strut 塔支撑，2 点。

适合:
保时捷 911/912/930 1966-89

提升车辆操控性最简单、最经济实惠的方法之一是安装 Rennline 减震塔支架。这些支架连接两个减震塔，几乎消除了急转弯时发生的所有外倾角变化。并非所有车辆都相同，因此 Rennline 的支架完全可调，可让您设置所需的预应力。该支架采用轻质航空级铝材制成，并配备 5 轴全 CNC 加工的铝坯支架和 FK 杆端。Rennline 减震塔支架可在几分钟内完成螺栓安装和拆卸，无需钻孔。无论您是在街道上还是赛道上，都能立即感受到它带来的不同。

安装说明请点击这里。安装说明

Rennline 点火开关挡板。塑料版本 9116131600170B 的替代品



適用於:
保时捷 911 1974-89
保时捷 964
保时捷 993

您的塑料钥匙开关边框是否因多年的使用而褪色和刮伤？如果是这样，Rennline 可以为您提供解决方案，这款漂亮的铝坯替代品将永久使用，并装饰您的仪表板。这款边框还将与我们的铝坯门把手和锁旋钮套件相得益彰。采用航空级铝材加工而成，有银色或黑色阳极氧化饰面可供选择。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

I27

您正在查看的产品与这些编号存在交叉引用关系

Rennline 铝坯窗摇柄。
成对出售，包含硬件。

適用於:
保时捷 911/912/930 1965 - 1989 * 配备手动车窗装置

厌倦了看着那些破裂或褪色的工厂塑料窗户摇柄？塑料花键是否被剥离并且无法使用？我们有解决方案。Rennline 坯料铝手动窗户摇柄采用优质工艺，具有出色的配合度和表面效果。完美搭配您的铝制手柄、踏板或其他铝制配件。这些摇柄有透明或黑色阳极氧化表面可供选择。适用于 1965-89 年所有配备手动窗户的 911、912 和 930 汽车。使用基本手动工具可在几分钟内安装。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

DH01

您正在查看的产品与这些编号存在交叉引用关系

Rennline 无线电封闭板。



適用於:
保时捷 911/912/930 1965 - 1985 年

如果您是那些宁愿听 6 缸发动机的悦耳声音也不愿听收音机的发烧友之一，那么我们为您提供了解决方案。应广大要求，我们开发了类似于后期 RS 和 RS Americas 上的收音机删除板。使用两个固定器和两个锁紧螺母即可轻松安装，并采用半纹理黑色粉末涂层，以获得干净的 OEM 外观。

ExactFit 磁性手机支架。



適用於:
保时捷 911 / 964 / 993

安装在燃油表上
如果您的车是右驾车，您的手机将位于中控台一侧。如果您的车是左驾车，您的手机将位于驾驶员车门一侧。


如今，人人都有手机；我们的生活已经围绕着手机转。问题是我们的汽车里没有合适的地方存放手机。市场上充斥着脆弱的通用支架、通风口支架以及夹在或粘在车内区域的支架，这些支架可能会造成损坏。Rennline 已通过我们的 ExactFit 手机支架解决了这个问题。这些支架根据您的特定车型量身定制，不会附着在车内任何会造成损坏的部分。我们的大多数支架都是螺栓固定装置，只需几分钟即可轻松安装。这款支架由铝坯加工而成，并围绕您的时钟夹紧，使安装干净简单。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PM0106RHD

您正在查看的产品与这些编号存在交叉引用关系

喇叭按钮装饰环 - 冰球方向盘



適用於:
保时捷 911/912 1965-1968

想要修复您的冰球喇叭按钮？Rennline 的这款镀铬装饰环让一切变得简单。该部件采用水射流切割和定制工具冲压而成，设计为可直接放入，代替您磨损的原厂装饰环。

图中所示为 Stoddard 皮革垫，不包含在内，但可单独购买。

仅适用于曲棍球冰球方向盘。
不适用于 Prototipo 或其他轮子。

Steering column support bushing - Nylon replacement for 91134702901 Porsche 911/912/930 1974-1989.



Does your 74-89 911/912/930 have the common slop, wiggle and/or rattle in the steering wheel? This is a common issue with these cars and is the result of a worn-out OE 91134702901 bearing liner. Rennline's new Steering Column Support Bushing installs in about 15 minutes and leaves you with a smooth/quite steering column. This is a big improvement over the factory replacement sleeve that takes hours to replace and is sure to fail again down the road.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

I69

您正在查看的产品与这些编号存在交叉引用关系

Rennline Front bumper wire mesh grill kit Black.



Fits:
Porsche 95B.1 Macan / Macan S 2014-2018
(only for vehicles with Sport Design kit)


One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.

Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
• Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip (some vehicle's don't require the clips, and simply install with screws) system that eliminates the need for adhesive, zip ties or other unreliable fastening technics.
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline, if you have a question we're here to help


* Cars with adaptive cruise control may require minor trimming with snips or scissors

钢坯 HVAC 控制面板。



適用於:
保时捷 65-89 911/912/930

Rennline HVAC 控制面板采用 CNC 铣削而成，由铝坯块制成，并经过阳极氧化处理，可升级为经典而优雅的仪表板。无论您是想清理早期 911 的仪表板，还是想将 G-body 汽车的仪表板翻新，这些 HVAC 控件都一定能胜任。该装置具有简化的标记和更新的微型 LED 指示器，与我们的 I12 坯料 HVAC 旋钮（未随附，但单独提供）完美搭配。OEM 塑料装置容易刮擦和褪色，而这些装置经得起时间的考验。可轻松安装到工厂控制机构上。

注意：如果安装在 74-89 年的汽车上，仪表板必须是追溯的，因为这些控制装置比后来的控制装置要小。

Bushing kit for camber plate and monoball.



For use with Rennline 964/993 Camber Plates and Monoball Strut Mounts

Bushing Kits for use with Rennline 964/993 Camber Plates and Monoball Strut Mounts. Kit is available in m12 or m14 sizes and includes 2 flat spacer bushings and 4 stepped bushings. These are replacement bushings which are only needed when swapping to struts with a different shaft diameter (These are included with the 964/993 front and rear upper monoball/camber plates).

Solid Rear Subframe Bushing Kit.


Fits:
Porsche 993

Factory rubber suspension mounts have a lot of flexibility and cannot withstand the extreme loads applied to them during performance driving conditions. When these mounts flex, all of the suspension geometry changes making the car unstable and unpredictable. A very popular suspension upgrade is to replace these bushings with solid mounts like the ones found on the factory race cars. These kits are machined out of billet aluminium and come with the required hardware to install.


Note: Pictures may not show actual product.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SB5876

您正在查看的产品与这些编号存在交叉引用关系

滤油器滴油盘



適用於:
保时捷 911 / 930

如果您更换过 911 的机油滤清器，那么您一定知道这款产品的用途。从油箱中拧下机油滤清器后，您的手上立刻会变得一团糟……车架导轨、发动机锡和热交换器也是如此。使用此滴油盘接住机油，避免弄脏。此滴油盘经过特殊设计，可放置在车架导轨上并环绕机油滤清器底部。它甚至还包含磁铁，可在您处理工作时牢牢固定在原位。

Rennline Front bumper wire mesh grill kit - Black.



Fits:
Porsche 987.1 Cayman / Cayman S 2005-08
Porsche 987.2 Cayman / Cayman S 2009-12

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.


Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
• Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip system that eliminates the need for adhesive, zip ties or other unreliable fastening technics
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline.

Please note: ** If you select "No" to "Center Radiator", you will not receive a center screen as there is no place to affix it, and there is no functional reason to install it. If you plan to add a third radiator kit down the road, select "Yes" for this question.

Pictures may not reflect actual application.

Front bumper wire mesh grill kit



Fits:
Porsche 987.1 Boxster / Boxster S 2005-08
Porsche 987.2 Boxster / Boxster S 2009-12
Porsche 981 (718) Boxster 2013-16
Porsche 982 Boxster 2017>>

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator or condenser will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable damage to the radiators and condensers on your Porsche and avoid replacement costs is to install a Rennline Radiator Protection Grill Kit. These grill screens completely cover the radiators and prevent damage to the radiators and condensers on your Porsche.

Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
• Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip system that eliminates the need for adhesive, zip ties or other unreliable fastening technics
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline.


* Porsche models with adaptive cruise control may require minor trimming with snips or scissors on the screens.

** If you select "No" to "Center Radiator", you will not receive a center screen as there is no place to afiix it, and there is no functional reason to install it. If you plan to add a third radiator kit down the road, select "Yes" for this question.

For bumper removal process, refer to our 991 how-to video, which is quite similar:



Pictures may not reflect actual application.