伦林

Rennline 铝坯阀盖下部。
2 套。



適用於:
保时捷 964 1989-94

厌倦了妻子不断唠叨车道上的油渍？Rennline 的解决方案是采用全新的全 CNC 加工钢坯阀盖。这些阀盖可直接用螺栓固定，以替换脆弱、漏油的原厂阀盖，并且经过加工以容纳可重复使用的 OEM 垫圈（见下文）。这些阀盖具有耐腐蚀涂层、倒角边缘和紧密的垫圈配合，是市场上最好的产品。有阳极氧化透明或黑色涂层，或粉末涂层红色，带或不带拉丝翅片。还包括火花塞线固定器和固定器硬件，以实现干净的安装。成对出售。

注意：红色涂层是按订单生产的，红色涂层需要 1 周时间。

注意：图片可能无法显示实际产品。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M12

您正在查看的产品与这些编号存在交叉引用关系

Rennline 后副车架稳定器带系紧装置（后部）。

适合:
保时捷 981 Cayman
保时捷 981 Boxster

需要修剪 718 和 718 GT4 下方的塑料托盘

大多数将爱车开上赛道的 Boxster 和 Cayman 车主都为他们的保时捷配备了比原厂轮胎更宽更粘的轮胎，这使得在转弯和制动时可以获得更高的重力加速度。在这种激烈驾驶过程中，两件式后副车架会因承受极大负荷而弯曲。这会抵消汽车精细调整的定位设置，从而降低制动和转弯潜力，并增加轮胎磨损。安装此套件后，您的保时捷将具有更高的操控和制动精度、可预测性以及对驾驶员的反馈。配备集成后固定支架和硬件，安装时间为 10 分钟。也可提供包含前固定器的套件，或仅提供不带稳定杆的后固定器套件。

杆端关节轴承防尘罩。一对
尺寸：适合 3/8"、7/16" 和 10mm、12mm 杆端。

适合：
保时捷 996 C2、C4、C4S、Turbo、GT2、GT3
保时捷 997 C2、C2s、C4、C4s、Turbo、GT2、GT3
保时捷 986 Boxster / Boxster S
保时捷 987 Boxster / Boxster S
保时捷 987 Cayman / Cayman S
保时捷 991 C2、C2S、C4、C4S、Turbo、GT2、GT3
保时捷 981 Boxster / Boxster S
保时捷 981 Cayman / Cayman S / Cayman GT4

每个杆端配 1 个套管。成对出售。

Spring Hats to use Rennline Rear Monoball Strut Mounts on 964/993 with Bilstein PSS9/PSS10 shock/spring setups. Designed for 12MM struts and springs with a 62mm spring ID.



For a PSS10 coilover setup Rennline off the shelf top mounts work fine (Front SB676974 Rear PN SB6974) but customers will also need a pair of our rear spring hats (SB77) to mate the Bilstein springs to our rear monoball. Those coilovers will use a 14mm strut nut in front and a 12mm strut out rear.

Fits:
Porsche 964 / 993*

Front bumper wire mesh grill kit 3 piece set - mesh for left / right and centre grill

Fits:
Porsche 991/991S C2 / C2S (NOT TARGA) *cars WITH parking sensors

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application.

Rennline Front bumper wire mesh grill kit - Black
3 piece set - mesh for left / right and centre grill

Fits:
Porsche 991/991S C2 / C2S (NOT TARGA) *cars WITHOUT parking sensors

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application.

Rennline Front bumper wire mesh grill kit,
5 meshes in this kit for SportDesign bumper.

Fits:
Porsche 991/991S cars with Sport Design bumper WITHOUT parking sensors

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application

20 个 M14x1.5 竞赛螺柱 20 个 M14x1.5球座螺母，用于安装原装或 OEM 保时捷车轮。

#雷恩线#

请注意 60 毫米螺柱较长。对于 OEM 车轮，大多数售后市场车轮甚至大多数垫片 45 毫米都足够长。在订购 60 毫米套件之前，请测量并确认您需要这么长的螺柱。

Rennline 的竞赛车轮螺柱使客户能够摆脱那些笨重的工厂凸耳螺栓，这些螺栓使快速更换轮胎变得非常麻烦。这些螺柱具有圆头端，可帮助定位车轮，并采用经过热处理的 8 级结构，超出了 SAE 标准的要求。这些螺柱标配黑色锌涂层，远远优于市场上许多其他螺柱上的黑色氧化涂层。螺柱经认证符合 ISO 898-1 10.9 级要求。这些特殊螺柱采用 m14x1.5 螺纹，常见于保时捷、奥迪和其他几个品牌，可用螺纹长度有 35 毫米、45 毫米和 60 毫米。作为包含 20 个螺柱和 20 个螺母的完整套件出售

• 轮毂侧有 15mm 螺纹
• 8mm 无螺纹轴肩用于制动盘
• 距肩部 35mm、45mm 或 60mm 的螺柱
• 12mm 子弹头

注意：安装时，将螺柱拧紧至 30 英尺/磅，然后将螺母拧紧至工厂规格。我们通常不建议在这些螺柱上使用乐泰。

球座凸耳螺母。您还在使用那些容易破裂、剥落和卡住的工厂铝制凸耳螺母吗？省去麻烦，改用这些钢螺母，这是大多数有组织的田径/竞赛活动所必需的。

锥形座凸耳螺母：检查您的车轮，因为一些售后车轮确实使用锥形螺母，这是该套件的可用选项。

可调节的半固体发动机支架。
2 套包括三对不同密度的插入物

適用於:
保时捷 964/993/996/997

Rennline 可调式发动机支架适用于 964、993、996 和 997，可为您的汽车提供终极调节能力。更换兼容的原厂支架将减少发动机运动，从而获得更好的加速和操控性，并显著改善换挡手感。这是适用于几乎所有汽车的终极解决方案，可让您根据自己的驾驶方式调节我们的支架。我们的支架采用铝坯 CNC 加工而成，包含三对不同密度的嵌件。使用较软的嵌件调节支架可减少发动机抖动并避免街车换挡失误，或使用最硬的嵌件可从更专注的赛道车中获得最大收益。您甚至可以混合搭配，为您提供 9 种可能的组合，让您根据自己的规格调节我们的支架。在 Rennline，我们知道您希望您的保时捷完美无瑕，这就是我们致力于追求卓越的原因。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M18

您正在查看的产品与这些编号存在交叉引用关系

Rennline 支柱塔支架 - RSR 焊接。

适合:
保时捷 911/912/930

Rennline 现为致力于打造终极经典 911 的人们提供这些支架。这些支撑塔支架的设计与我们多年来一直提供的装置类似，但其强度和有效性达到了新的水平。

这些支架均在公司内部精密切割和弯曲，并经过凹坑染色处理，以达到极致的强度和刚度。焊接到支撑塔上后，它们不仅为支撑塔支架的安装提供了理想的位置，还能提升整个塔的强度和刚度。

该套件还配备了一根完全可调的球形端部支撑杆，用于将支撑杆固定在支架之间。这种组合可提供极致的刚度和性能，确保在最紧张的路况下也能保持最佳的悬架几何形状和转向手感。

注意：支架需要焊接到前支柱塔上。

Rennline Decambered Ball Joint Set.
Priced Per Pair.

Fits:
Porsche 911/912/914 1968-71

Rennline Decambered Ball Joints are a track ready solutions for 911/912/914 owners looking to perfect their suspension setup. These Decambered Ball Joints rectify the problem of limited camber adjustment on the top of the strut by moving the bottom of the strut further from the body. With the same upper strut mount location these ball joints alone can gain up to -.75° of camber and gain .5" of track width improving the stance and stability of the front end all at once. Combine these with Rennline adjustable camber plates and monoball mounts for maximum adjustability on the track and the street. These are a perfect compliment for any street or track suspension, and are a must have for those looking to precisely dial in the ultimate alignment setup. Kit includes backing plate/ring, bottom locking plate and cotter pin to secure locking plate. Everything you need for a factory correct install.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S0300XEARLY

您正在查看的产品与这些编号存在交叉引用关系

Front Bumper GT3 Smile Wire Mesh Kit.

Wire Mesh Kit: Wire Mesh, Brackets and hardware. Available in BLACK or SILVER.

Front Bumper Air-Outlet Grille Porsche 997 Models.
This air vent can be retro fitted into model 997 bumpers giving the GT3 look.

Fits:
Porsche 997 2005>>
Porsche 987 Boxster 2005>>
Porsche 987 Cayman 2005>>

The front of a GT3 has a look and feel that sets it far apart from any other automobile in its class. The sought after upper air vent screams speed and aggression, but unfortunately it’s only available on a true GT3. Installing one of these vents on a non GT3 bumper can be very problematic, one slip of the saw and your bumper cover is unusable. Rennline's GT3 vent installation kit turns a daunting task into a very simple one. No more tracing, cutting, praying, grinding, and gluing. Just attach the fixture, cut the profile, and mount the OEM vent with the supplied brackets and hardware. It’s truly that simple.

Note: All of these components are designed to work with factory bumpers and vents.
Note: Pictures may not show actual product.

前保险杠 GT3 微笑安装套件。
安装套件：不锈钢切割夹具和螺丝。



前保险杠出风口格栅保时捷 997 车型。
该通风口可以改装到 997 型号的保险杠上，使其具有 GT3 的外观。

适合：
保时捷 997 2005>>
保时捷 987 Boxster 2005>>
保时捷 987 Cayman 2005>>

GT3 的前部外观和感觉与同级别的其他汽车截然不同。备受追捧的上部通风口彰显速度和攻击性，但不幸的是，只有真正的 GT3 才有。在非 GT3 保险杠上安装其中一个通风口可能非常麻烦，锯子一滑，保险杠盖就无法使用。Rennline 的 GT3 通风口安装套件将艰巨的任务变成了非常简单的任务。不再需要描图、切割、祈祷、研磨和粘合。只需连接固定装置、切割轮廓，然后使用随附的支架和硬件安装 OEM 通风口即可。真的就这么简单。

注意：所有这些组件均设计用于与工厂保险杠和通风口配合使用。
注意：图片可能无法显示实际产品。