转向横拉杆

Steering rack inner & our tie rods kit
 * For use with steering rack 99634701104 or 99634701105
This kit provides replacement inner and outer steering tie rods for both sides of the vehicle, together with protective rack bellows. The inner tie rods connect directly to the steering rack, while the outer tie rods and ball joints transfer steering movement to the wheel carriers. The rack bellows protect the inner steering joints and steering rack from dirt, moisture and road contamination.
Complete kit for both sides, includes OE Match tie rods with nuts and TRW rack bellows with clamps

Fits:
Porsche 996 1998 - 2005 all models
Porsche 986 Boxster 1997 - 2004 all models

Diagram ref no 2, 3, 4, 5, 6, 7, 8 and 11

Kit Contents
   2 × 99634713105 — OE Match outer tie rods / track rods, , supplied with nut
   2 × 99634732203 — OE Match inner tie rods, , supplied with nut
   1 × 99634719102 — TRW steering rack bellows kit with clamps - for early rack, OE Steering Rack No.: 996.347.011.05, 996.347.012.05
   Associated tie rod nuts as supplied with the kit

What this kit does
Renewing the complete steering linkage helps restore precise steering response and correct front wheel geometry where existing components have developed wear or excessive play. Replacing the inner and outer tie rods together also provides an opportunity to renew the steering rack bellows, helping protect the new components and steering rack from contamination.

Functions:
•  Complete steering repair kit for both sides
•  Includes left and right inner tie rods
•  Includes left and right outer tie rods with ball joints
•  Includes tie rod retaining nuts
•  Includes TRW steering rack bellows with clamps
•  Helps restore accurate steering response
•  Helps eliminate excessive steering play
•  Supports correct front wheel alignment
•  Helps reduce knocking and looseness from worn steering joints
•  Protects the steering rack and inner joints from dirt and moisture
•  Suitable for a complete front steering linkage overhaul.

Why Replace the Steering Components?
Inner and outer tie rods are exposed to continual steering movement, suspension loads, vibration and road impacts. Their joints can gradually develop wear and play, affecting steering accuracy and wheel alignment. Steering rack bellows can also split, crack or deteriorate with age, allowing water and contamination to reach the inner joints and steering rack.

Common symptoms can include:
•  Loose or vague steering
•  Knocking or clunking from the front axle
•  Excessive play in the steering linkage
•  Uneven or accelerated tyre wear
•  Difficulty maintaining wheel alignment
•  Damaged or split steering rack bellows
•  Play detected during servicing or inspection
•  Replacing the complete set allows both sides of the steering system to be refreshed together.

Where it fits on the car
The components fit within the front steering rack and steering linkage assembly, connecting the steering rack to the left and right front wheel assemblies.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TRACKRODKIT996.E

您正在查看的产品与这些编号存在交叉引用关系

Steering rack inner & our tie rods kit
 * For use with steering rack  996.347.011.06, 996.347.011.07, 996.347.012.07, 996.347.012.08 
This kit includes replacement inner and outer steering tie rods for both sides of the vehicle, along with protective steering rack bellows. The inner tie rods attach directly to the steering rack, while the outer tie rods with ball joints connect the steering system to the wheel carriers. The rack bellows help protect the steering rack and inner joints from dirt, moisture and road debris.
Complete kit for both sides, includes OE Match tie rods with nuts and TRW rack bellows with clamps

Fits:
Porsche 996 1998 - 2005 all models
Porsche 986 Boxster 1997 - 2004 all models

Diagram ref no 2, 3, 4, 5, 6, 7, 8 and 11

Kit Contents
   2 × 99634713105 — OE Match outer tie rods / track rods, , supplied with nut
   2 × 99634732203 — OE Match inner tie rods, , supplied with nut
   1 × 99634719104 — TRW steering rack bellows kit with clamps - for late rack, OE Steering Rack No.: 996.347.011.06, 996.347.011.07, 996.347.012.07, 996.347.012.08
   Associated tie rod nuts as supplied with the kit

What this kit does
Renewing the complete steering linkage helps restore precise steering response and correct front wheel geometry where existing components have developed wear or excessive play. Replacing the inner and outer tie rods together also provides an opportunity to renew the steering rack bellows, helping protect the new components and steering rack from contamination.

Functions:
•  Complete steering repair kit for both sides
•  Includes left and right inner tie rods
•  Includes left and right outer tie rods with ball joints
•  Includes tie rod retaining nuts
•  Includes TRW steering rack bellows with clamps
•  Helps restore accurate steering response
•  Helps eliminate excessive steering play
•  Supports correct front wheel alignment
•  Helps reduce knocking and looseness from worn steering joints
•  Protects the steering rack and inner joints from dirt and moisture
•  Suitable for a complete front steering linkage overhaul.

Why Replace the Steering Components?
Inner and outer tie rods are exposed to continual steering movement, suspension loads, vibration and road impacts. Their joints can gradually develop wear and play, affecting steering accuracy and wheel alignment. Steering rack bellows can also split, crack or deteriorate with age, allowing water and contamination to reach the inner joints and steering rack.

Common symptoms can include:
•  Loose or vague steering
•  Knocking or clunking from the front axle
•  Excessive play in the steering linkage
•  Uneven or accelerated tyre wear
•  Difficulty maintaining wheel alignment
•  Damaged or split steering rack bellows
•  Play detected during servicing or inspection
•  Replacing the complete set allows both sides of the steering system to be refreshed together.

Where it fits on the car
The components fit within the front steering rack and steering linkage assembly, connecting the steering rack to the left and right front wheel assemblies.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TRACKRODKIT996.L

您正在查看的产品与这些编号存在交叉引用关系

转向横拉杆内接头 2 件套。保时捷 986 / 996
2 件套



適用於:
保时捷 986 Boxster 1997-05
保时捷 996 1998-05
保时捷 996 Turbo / GT2 / GT3

转向齿条通过两个横拉杆控制前轮，横拉杆末端为可更换的接头 - “横拉杆端”，与旋转轮毂连接。这些接头最终会磨损，导致转向和操控问题，并成为英国 MOT 的缺陷点，可能也是其他国家法定检验的缺陷点。

单击图片可查看大部件图。
图表参考编号 6。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634732203

您正在查看的产品与这些编号存在交叉引用关系

Track rod set
Track rod wear is a common steering issue on these vehicles and can lead to excessive play, knocking, inaccurate steering and difficulty maintaining correct wheel alignment. This kit contains two OE Match track rods, each supplied with its ball joint. The same track rod fits either the left or right side, making this set suitable for replacing both sides of the vehicle.
SET OF 2, Left & Right

Fits:
Porsche 996 1998 - 2005 all models
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models

Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2005 - 2008
Porsche 987.2 Boxster 2009 - 2012

Porsche 987C.1 Cayman 2006 - 2008
Porsche 987C.2 Cayman 2009 - 2012

Diagram ref no 8

What this kit does
Replacing both track rods helps restore accurate steering response and eliminates excessive play caused by worn ball joints or steering rod components. Renewing both sides together is particularly useful during a front steering overhaul and provides a consistent level of wear and performance across the front axle.

Functions
•  Replaces both front steering track rods
•  Includes two track rods with ball joints
•  Covers left and right sides
•  Transfers steering movement from the steering rack to the wheels
•  Helps restore accurate steering response
•  Helps maintain correct front wheel alignment
•  Reduces steering play caused by worn joints
•  Helps address knocking or looseness in the steering linkage
•  Suitable for steering and front suspension overhaul

Why Replace the Track Rods?
The track rod ball joints are subject to constant movement, road impacts, vibration and contamination. Over time, the joints can wear and develop excessive play.

Common symptoms of worn track rods can include:
•   Loose or vague steering
•   Knocking or clunking from the front axle
•   Excessive play in the steering system
•   Uneven tyre wear
•   Poor or unstable wheel alignment
•   Reduced steering precision
•   Wear identified during inspection or servicing

Replacing both track rods as a pair helps restore consistent steering performance across the front axle.

Where it fits on the car
The track rods fit between the steering rack and front wheel steering assemblies. This kit provides one track rod for each side of the vehicle.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634713105

您正在查看的产品与这些编号存在交叉引用关系