后控制臂

Adjustable caster bushing kit.
1 kit required per axle



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 Boxster and Cayman -Front Only
Porsche 991 -Front Only

Caster Tuning
Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms (GT3 control arms or eccentric monoballs) to correct for un-intended caster change that is caused by the extended arms.

Caster is also a great tuning aid for adjusting out understeer. Our Caster Adjusters let you tune the caster you need.

Two eccentric mounting points increase range of adjustment by up to 25mm. Choose from the inner bore for minor caster adjustments or the outer bore for extreme adjustments.

Rear Weight Bias
For the rear suspension, our Caster Adjuster can reduce rear overhang and rear weight bias. Cars with aggressive rear camber actually draw the wheels forward, increasing rear weight bias. Use our Caster Adjuster to compensate and even over-compensate for less rear weight bias than stock

Maintain Proper Alignment
Our Caster Adjuster is solid aluminum to hold alignment settings precisely. Stock rubber bushings compress under load, allowing alignment to wander and making the car less predictable. Our solid design eliminates compression, improves precision and maintains geometry true.

Functional Design Built To Last
Available for factory type lower control arms (wishbones) front and rear, including stock type arms and GT3 arms

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180011

您正在查看的产品与这些编号存在交叉引用关系

Adjustable lower control arms (lower wishbone)



Fits
Porsche 986 Boxster - Front and Rear
Porsche 996, 997 - Front and Rear
Porsche 991 - Front Only
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 981 Boxster and Cayman - Front and Rear
Porsche 718 Boxster and Cayman - Front and Rear

Set of 2 x Adjustable lower control arms - 1 pair, required per axle

Elephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.

Quick and Easy Adjustments – No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.

Widen Track – Use in combination with our camber plates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.

Heim Joint – Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.

Fully Weather Sealed – Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use.

Camber Adjustment – Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.

Caster Adjustment – Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.

The arms are fully rebuildable with replaceable heim and ball joints.

On 996, 997, & 991 Cars:
Center puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer

Litronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor.


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180001

您正在查看的产品与这些编号存在交叉引用关系

BBi Autosport adjustable rear toe kit



Fits
Porsche 981 Boxster
Porsche 981 Cayman

Features :

•   Provides additional rear toe adjustment
•   OEM link is non-adjustable and eccentric bolt provides limited adjustment range, causing excessive tire wear and handling issues.
•   Helps maintain proper rear end suspension geometry
•   Fits rear axle
•   Each Kit Includes Pair of 2 Links

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBITOE981

您正在查看的产品与这些编号存在交叉引用关系

带有可调衬套的跟踪控制臂。

#罗勒#

两个衬套均采用黑色 95A 材料以实现最佳性能，并配有偏置外套管和 CNC 加工内套，可在车上调整主销后倾角和外倾角，从而快速轻松地优化车轮定位。（不包括工具或扳手）这些臂具有悬架几何调整功能，主销后倾角最多可增加 0.4°，外倾角调整范围为 +/- 0.75°

OEM 零件编号： 98133105301、99733104180、99634105319

適用於:

正面
保时捷 997 GT2、GT3 和 GT3RS
保时捷 986 Boxster（1997-2004）
保时捷 996（1997-2005）

后部
保时捷 997 GT2、GT3 和 GT3RS
保时捷 997 配备涡轮增压
保时捷 718 Boxster/Cayman
保时捷 981 Boxster/Cayman
保时捷 986 Boxster（1997-2004）
保时捷 987 Boxster（2005-2012）
保时捷 987C Cayman（2005 - 2012 年）
保时捷 996（1997-2005）

请注意：您将需要 997 个前叉臂来容纳可调节衬套，因为它们比标准衬套更宽。
当您将此商品添加到购物篮时，系统将提示您也需要添加必填产品。

提供可调节和不可调节衬套选项，以适应不同的驾驶和性能要求。

请点击‘放大’查看图表（第 21 号）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3602409961G

您正在查看的产品与这些编号存在交叉引用关系

偏心锁套件。适用于保时捷 993 / 986 / 987 / 996 / 997 车型。



适用：
保时捷 986 Boxster
保时捷 987 Boxster / Cayman
保时捷993
保时捷996
保时捷997

产品描述
Rennline的偏心锁紧套件可替换原厂的偏心调节系统，后者常会导致赛道使用过程中出现定位偏差。这些锁紧装置能够牢固地固定可调连杆的副车架侧，确保车辆在重载情况下定位不会发生变化。

本产品成对出售，包括 2 个螺栓、2 个锁紧螺母、4 个垫圈和 4 个偏心锁紧螺母。

993 - 可用于上控制臂和下脚趾臂。
996/997/986/987 - 可用于下控制臂和下脚趾臂。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S40

您正在查看的产品与这些编号存在交叉引用关系

GT3 Adjustable outer lower control arms – 2 Piece,
with adjustable caster puck.



Fits:
Porsche 991 Front Only (Does Not Fit 991 GT3)
Porsche 992 Front Only (Does Not Fit 992 GT3)
Porsche 981 Front And Rear


GT3 Lower Control Arms (LCA)

992 GT3 cars are equipped with a special front GT3 control arm that is two-piece and length-adjustable by fitting shims between the halves. The changeable length allows for aggressive camber settings and track width adjustment, increasing cornering grip and performance.
Unfortunately the stock 992 GT3 control arm cannot be fit to a non-GT3 992 because the ball joint end is completely different.
That’s why we created these GT3 type front lower control arms to fit the 992 C2, C4 and Turbo cars.
Our GT3 ERX LCAs for the 922 provides the same type front camber and track width adjustment for non-GT3 992 cars.

The GT3 ERX lower control arm is a system built up of three component parts, each ordered separately:
– GT3 ERX adjustable outer lower control arm
– GT3 adjustable inner lower control arm
– GT3 lower control arms shims (various thicknesses, stackable)

GT3 ERX Front Outer Lower Control Arms

Elephant Racing has developed an upgraded GT3 type front lower control arm for the non-GT3 992 cars. Our GT3 type arms have the correct ball joint style for fitment to 992 C2, C4 and Turbo cars. They do not fit 992 GT3 cars.

Like the factory lower control arms, the Elephant Racing outer arm has an integrated ball joint that is weather sealed. Unlike the factory lower control arms, the ball joint in the Elephant Racing arms is rebuildable and we offer the rebuild kit allowing you to renew the arm when needed.

The GT3 ERX LCAs have features to accept the factory height sensor and air deflectors.

The outer arms are sold as a left and right side pair, to be combined with our GT3 inner lower control arms – orderable separately.

These can be paired with a choice of GT3 lower control arms inner:
– Elephant Racing GT3 lower control arm inner rubber bushing
– Elephant Racing GT3 lower control arm inner spherical bearing


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180044

您正在查看的产品与这些编号存在交叉引用关系

GT3 ERX Inner lower control arm (LCA), Rubber Bushing Module.



Fits:
Porsche 996, 997, 991, 992 W/ GT3 Style Control Arms (Front/Rear),
Porsche Boxster, Cayman 1999>> W/ GT3 Style Control Arms (Front Only)

Elephant Racing has developed GT3 type inner lower control arms.
These are readily available and dimensionally identical to the factory parts. They can be mix-matched with the factory type inner/outer lower control arm and shims.
The Elephant Racing inner arm is offered in two flavors, GT3 Street Inner Lower Control Arm and GT3 Cup Inner Lower Control Arm. GT3 street is equipped with a rubber bushed central bushing and the GT3 Cup is equipped with a solid caster adjustable central bushing.
Our GT3 Street Inner Lower Control Arm has sport-hardness rubber bushings to provide upgraded control and driver feedback while still offering good road noise isolation.
Our GT3 Cup Inner Lower Control Arms uses weather sealed spherical bearings. These deliver superior precision, control, and performance. They will transmit a bit more road noise than rubber bushings.

These can be paired with a choice of GT3 outer control lower arms:
– Elephant Racing GT3 Street Outer Lower Control Arms
– Elephant Racing GT3 Cup Outer Lower Control Arms
– Factory GT3 Street Outer Lower Control Arms

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180039

您正在查看的产品与这些编号存在交叉引用关系

Litronic Bracket for adjustable control arms.



Fits
Porsche 996 - Front & Rear with Litronic headlights
Porsche 997 - Front & Rear with Litronic headlights
Porsche 991 - Front & Rear with Litronic headlights

Porsche 986 - Front Only with Litronic headlights
Porsche 987 - Front Only with Litronic headlights
Porsche 981 - Front Only with Litronic headlights,

Price is for 1 and 2 Required per axle

This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180009

您正在查看的产品与这些编号存在交叉引用关系

Litronic可调控制臂支架。

#追踪大象#

合身
保时捷 987 - 带 Litronic 前大灯的尾部
保时捷 981 - 带 Litronic 前大灯的尾部

价格为每轴所需1个或2个的价格。

此支架适用于原厂配备Litronic前大灯的车辆。此适配器支架连接到前大灯角度传感器。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

218002

您正在查看的产品与这些编号存在交叉引用关系

下叉臂中央衬套拆卸和安装工具。

需要 1 个工具

#大象赛跑#

适合
保时捷 986 Boxster -前部和后部
保时捷 987 Boxster 和 Cayman -前部和后部
保时捷 996 -前部和后部
保时捷 997 -前部和后部
保时捷 981 Boxster 和 Cayman -仅前部
保时捷 991 -仅正面

简化 Monoball 产品和更换衬套的安装过程。

我们的两件式杯形和活塞工具可轻松取出和插入衬套，无需拆卸轮架或控制臂。无需使用车间压力机。这些工具的设计精确贴合衬套周长，可防止衬套意外损坏并确保正确安装。

我们有用于 LCA 中央衬套、后直立 LCA 衬套和后直立减震器支架衬套的工具。

996、997、986、987 和 981 上的前后控制臂
前下控制臂仅适用于 991

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260019

您正在查看的产品与这些编号存在交叉引用关系

Lower control arm eccentric monoballs.
1 kit required per axle



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 - Front and Rear
Porsche 718 - Front and Rear
Porsche 991 - Front Only

Our Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing camber, as needed.

Increasing Camber

Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the 996/997 rear suspension, about .36 degree of negative camber on the Boxster rear suspension, and .39 degrees on the 996/997/Boxster front suspension.
Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.

Decreasing Camber

Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive & front camber about .39 degrees positive for 996/997 while Boxsters will get about .39 degrees positive front and .36 degrees positive rear.



Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms.

Sized to fit factory original control arms. Not compatible with some aftermarket replacement control arms that use a larger non-stock size bushing.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260006

您正在查看的产品与这些编号存在交叉引用关系

BBi Autosport front/rear lower control arm kit for Porsche 996/997/991/987/981 except GT4
Fits cars with and without PASM



Features :

•   Improved two piece 996 GT3 lower control arm design
•   Stronger than cast motorsport Cup arms
•   Allows proper camber adjustment
•   Uses GT3 shims to adjust camber & lower control arm length (sold separately)
•   High-strength steel alloy spherical bearings, completely serviceable unlike the motorsports arms
•   Sealed monoball inner bearing
•   Allows easy access to inner arm hardware
•   Includes adjustable thrust arm bushings to adjust caster and wheelbase
•   A must have for all track and race enthusiast
•   Each kit includes pair of 2 arms
•   Fits both front and rear axles
•   Compatible with all 996/997/991/987/981 models except GT4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBILOWRCNTRL9697

您正在查看的产品与这些编号存在交叉引用关系

RSS Lower Control Arm Kit for Porsche Models .
Type: None Adjustable Thrust Arm Bushing



RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.

The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.

Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.

RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.

• Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.

• Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.

• Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).

• Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.

Please Check Fitting Guide Before Ordering Click Here

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

357

您正在查看的产品与这些编号存在交叉引用关系