Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Kits
About Kits
Kits for Porsche
Design911 offers an extensive selection of package deals for Porsche parts, providing an ideal solution for Porsche enthusiasts looking to upgrade, maintain, or personalise their vehicles. These packages are thoughtfully curated to include complementary components, helping with compatibility and overall cost-effectiveness.
A Quick Look at Kits
Kits information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Kits are listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, axle or side, and any option codes or connector types where relevant.
- Typical reasons people choose kits include wanting all the right Porsche parts in one order, reducing the risk of missing seals, clips, or one-time-use fixings, and saving workshop time.
- Kits help ensure matched components (for example, brake refresh kits, service kits, or suspension refresh kits) so parts work together as intended.
- Common real-world triggers include repeated failures because a small supporting part was not replaced, mixed part revisions, or mismatched specification between components.
- If problems occur, they are often traced to incorrect vehicle selection, old core components not addressed, or installation shortcuts rather than the kit itself.
- Before you start work, compare the kit contents with the Porsche PET diagram and your job list so you know exactly what is included and what may still be needed.
- Always confirm whether kits are vehicle-specific, and check if bolts, clips, fluids, and other one-time-use hardware are included or need to be added separately.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, increased stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
- Check whether new fitting kits and wear sensors are included or should be added separately.
- Confirm if parts are OE-equivalent replacements or higher-friction performance upgrades before ordering.
Brake Pads Packages — Brake pad packages group matched front and rear sets, making it easier to renew all pads at once for consistent feel and balance across the axle. Worn pads can cause squealing, low pedal feel, longer stopping distances and may score discs if run down to the backing plates.
- Verify whether the package covers front, rear, or both axles and whether it is a standard or performance compound.
- Check the contents list for anti-squeal shims, hardware and any wear sensors you may want to replace at the same time.
Gearbox / Transmission — You change gearbox and transmission parts when you have shifting issues, noise, leaks, or you are refreshing a high-mileage drivetrain. It is also common during clutch upgrades or ratio changes. Typical symptoms include whining in a specific gear, crunching on shifts, or difficulty selecting gears, as well as leaks at seals or casing joints.
- Not all noise or poor shifting means the gearbox itself is failing—mounts, linkage, clutch, and oil condition can produce similar symptoms.
- Using the correct-spec gearbox oil and refreshing it is often a sensible first step before major work.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected. Doing this on schedule reduces wear, helps prevent breakdowns, and maintains performance—especially on older Porsche models where neglected servicing can quickly lead to costly repairs. Symptoms prompting attention include hard starting, rough idle, reduced fuel economy and poor throttle response.
- Both OEM and reputable aftermarket parts can be suitable—always match the correct specification for your Porsche.
- Keeping a clear service log helps diagnostics later and can support the car’s resale value.
Service Kits — Service kits bundle the correct parts for a routine Porsche service into one package, reducing ordering mistakes and ensuring you can reset the car to a known maintenance baseline. They are ideal when catching up on overdue work or planning regular servicing to a consistent standard. Symptoms leading to a full kit are often general, such as sluggish running, inconsistent idle, poor economy, or increased engine noise from old oil and filters.
- Service kits typically include filters and key consumables, but contents vary—check the list carefully and add any extra items you want to replace while access is good.
- Kits are usually specific to model, year and engine, so confirm these details before ordering.
Explore Kits at Design911
View the current Kits range for Porsche at Design911, then filter by model and category to narrow down to the right parts and packages for your project.
99335280102/1KIT
Product Information
This rear brake disc backing plate (splash shield) is a precision-engineered replacement for Porsche 911 (993) models from 1995–1998, suitable for either the left or right rear axle. Built to exact original-equipment specifications, it replicates the factory design to protect the brake disc and rotor assembly from water, dust, and debris, maintaining optimal braking performance and prolonging the lifespan of surrounding components.
SET OF 2
Porsche 993 1995 - 1998 (all models)
Diagram Ref No 3
• Part Number: 993 352 801 02 (also referenced as 993-352-801-02)
• Position: Rear axle, left or right side (both sides using same part number)
• Function: Brake disc backing plate / splash shield – mounted behind rotor to protect from debris, contain brake dust, and provide clean mounting surface for rotor assembly.
• Replacement Fitment Note: Should match original mounting points, material thickness, and rotor clearance — ensures correct rotor/calliper relationship and proper wheel clearance.
Over time, the original backing plate or splash shield can become corroded, bent, or damaged, leading to rotor contact, reduced braking performance, or accelerated wear — especially in wet or salty environments. Replacement restores proper protection and maintains brake system seals to factory standards.
Replace this part when:
• It shows visible damage, bending, or breakage.
• Corrosion compromises the plate’s structure or mounting points.
• You’re performing a brake overhaul or replacing rotors/calipers.
• During restoration or maintenance to preserve collector value.
Installing a direct-fit OE replacement ensures the brake assembly stays in optimal condition and functions as intended.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99335280102
The product you are viewing cross references to these numbers
Product Information
Brake disc cover plate REAR. This rear brake disc backing plate (splash shield) is a precision-engineered replacement for Porsche 911 (993) models from 1995–1998, suitable for either the left or right rear axle. Built to exact original-equipment specifications, it replicates the factory design to protect the brake disc and rotor assembly from water, dust, and debris, maintaining optimal braking performance and prolonging the lifespan of surrounding components.
SET OF 2
Porsche 993 1995 - 1998 (all models)
Diagram Ref No 3
• Part Number: 993 352 801 02 (also referenced as 993-352-801-02)
• Position: Rear axle, left or right side (both sides using same part number)
• Function: Brake disc backing plate / splash shield – mounted behind rotor to protect from debris, contain brake dust, and provide clean mounting surface for rotor assembly.
• Replacement Fitment Note: Should match original mounting points, material thickness, and rotor clearance — ensures correct rotor/calliper relationship and proper wheel clearance.
Over time, the original backing plate or splash shield can become corroded, bent, or damaged, leading to rotor contact, reduced braking performance, or accelerated wear — especially in wet or salty environments. Replacement restores proper protection and maintains brake system seals to factory standards.
Replace this part when:
• It shows visible damage, bending, or breakage.
• Corrosion compromises the plate’s structure or mounting points.
• You’re performing a brake overhaul or replacing rotors/calipers.
• During restoration or maintenance to preserve collector value.
Installing a direct-fit OE replacement ensures the brake assembly stays in optimal condition and functions as intended.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99335280102
99335280102
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Brake disc cover plate REAR. Porsche 993 1995 - 1998 (99335280102/1)
Vehicle Group
Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
€105.30
Now €94.76
In Stock - 24 Hour Dispatch
92810557100/1KIT
Product Information
Fits:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92810557100
The product you are viewing cross references to these numbers
Product Information
Timing belt tensioner & idler rollers kit. Porsche 928 1978-86Fits:
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Diagram ref no: 1, 9, 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92810557100
92810515750
92810551212
92810557100
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Timing cam belt RD Tooth. Porsche 928 1983-96 (92810515750/1)
1 x Camshaft tensioner roller. Porsche 928 1983-95 (92810551212/1)
1 x Camshaft Idler Roller. Porsche 928 1978-82 (92810557100/1)
Vehicle Group
Vehicle Group
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
€198.20
Now €183.01
Stock Due - No Delivery Date
92810557104/1KIT
Product Information
Fits:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92810557104
The product you are viewing cross references to these numbers
Product Information
Timing belt tensioner & idler rollers kit. Porsche 928 S4 / 928 GTSFits:
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Diagram ref no; 1, 9, 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92810557104
92810515750
92810551212
92810557104
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Timing cam belt RD Tooth. Porsche 928 1983-96 (92810515750/1)
1 x Camshaft tensioner roller. Porsche 928 1983-95 (92810551212/1)
1 x Camshaft idler roller. Porsche 928 1986-95 (92810557104/1)
Vehicle Group
Vehicle Group
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
€187.02
Now €168.33
In Stock - 3- 5 Days Dispatch
9GT827867A/1KIT
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9GT827867A
The product you are viewing cross references to these numbers
Product Information
SilverRocket Dry Carbon Mini Gurney Flap & DRS-1 Rear
Wing Endplate Kit – Aerodynamic Precision for Porsche 718 GT4 RS
The SilverRocket Dry Carbon Mini Gurney Flap & DRS-1
Rear Wing Endplate Kit elevates Porsche 718 GT4 RS aerodynamics to true
motorsport standards. Designed for maximum performance and refined style, this
lightweight kit combines aerospace-grade dry carbon fibre construction
with CFD-optimised design to improve high-speed stability and downforce
efficiency.
Fits:
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
- Porsche Cayman GT4 RS Clubsport
2020-2024
The Mini Gurney Flap enhances the rear wing’s aerodynamic profile, while the DRS-1 Endplates streamline airflow across the wing edges, reducing turbulence and drag. Together, these upgrades deliver an 8.3 % increase in rear downforce at 200 km/h, ensuring superior rear-axle stability, sharper cornering, and enhanced driver confidence — both on road and track.
What Do They Do?
The kit’s components perform complementary aerodynamic functions:
Mini Gurney Flap
- Generates
additional downforce by energising airflow over the wing.
- Improves
high-speed balance and cornering stability.
- Increases aerodynamic grip without adding drag.
DRS-1 Endplates
- Control
lateral airflow to minimise pressure loss and turbulence.
- Enhance
downforce consistency across the entire wing span.
- Improve top-speed efficiency by reducing aerodynamic drag.
Why Standard Wing Components Fail
Typical plastic or composite rear-wing components degrade
under heat and aerodynamic load. Failures often occur due to:
- Material
fatigue or flexing during sustained high-speed use.
- Heat
deformation and UV-related cracking.
- Weak
structural bonding that causes vibration and air leakage.
- Inefficient geometry that disturbs airflow and reduces stability.
The SilverRocket kit overcomes these flaws using motorsport-grade carbon fibre layered with advanced resin bonding and a high-temperature resistant finish — guaranteeing strength, precision, and longevity even in demanding track conditions.
Why Upgrade to SilverRocket Carbon Aerodynamics
Replacing standard components with the SilverRocket kit offers quantifiable gains in both performance and aesthetics.
Key Benefits:
- +8.3
% rear downforce at 200 km/h for unmatched stability.
- 50
% lighter than standard alternatives, improving handling response.
- Aerospace-grade
dry carbon fibre ensures superior stiffness-to-weight ratio.
- CFD-validated
aerodynamic design reduces drag and enhances efficiency.
- UV
and heat-resistant finish ensures long-term durability.
- Perfect
fitment with manufacturer-quality alignment and mounting.
- Aggressive motorsport styling, highlighting the GT4 RS’s race-bred character.
Highlights
- Unique
SilverRocket Mini Gurney Flap enhances the GT4 RS wing’s sporty
aesthetic.
Combined with - Combined
with DRS-1 Endplates, delivers +8.3 % rear downforce at 200 km/h.
- Dry
carbon fibre construction is 50 % lighter than standard
plastic.
- CFD-tested
aerodynamic geometry ensures measurable performance gains.
- Motorsport-grade
materials withstand extreme track conditions.
- Improves high-speed stability, cornering control, and rear-end balance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9GT827867A
9GT827767A0K1
9GT827768A0K1
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Rear wing Endplates for OEM wing in Dry Carbon Fibre. Porsche 718 Cayman GT4 RS (9GT827867A/1)
1 x Mini Gurney Flap for OEM wing in Dry Carbon Fibre. Porsche 718 Cayman GT4 RS (SRMGFOEM)
Vehicle Group
Vehicle Group
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
- Porsche Cayman GT4 RS Clubsport 2020-2024
Price: €1,681.73
Orderable - 7 to 10 Days
91134379202/1KIT
Product Information
Size: 16mm
This Stabilizer bar bushing is designed to replace the original 16 mm anti-roll bar mount bush used in Porsche 911 models (1974–1977) models. It secures the stabilizer bar to the chassis, allowing proper flex while isolating vibration and lateral movement.
Fits:
Porsche 911 1974 - 1977
Diagram ref no 23
• Quantity: Set of 4 pieces
• Inner Diameter: 16 mm (designed for 16 mm sway bar)
• Function: Supports and isolates the anti-roll bar from the chassis while allowing controlled movement
• Position: Front suspension — stabilizer bar mounting locations (two per side)
• Symptoms of wear: Squeaking, knocking, excessive body roll, looseness, or sway bar movement
• Benefits: OE-spec material hardness and fit, quieter ride, reduced vibration, restored bar performance, and long-term durability
• Installation: Fit each bushing over the stabilizer bar, seat securely in the bracket cradle, and fasten using the correct factory clamps or straps
Over time, stabilizer (sway) bar bushings are subjected to continuous twisting, compression, and exposure to road debris, heat, and oils. The rubber material gradually hardens, cracks, or deforms, reducing its ability to cushion the stabilizer bar and maintain tension. When this occurs, the bar can move or rattle inside its mounts, leading to reduced cornering stability and increased noise during driving.
Replace this set when:
• You hear clunking or squeaking noises from the front suspension
• The car feels less stable in corners or exhibits excessive body roll
• The bushings show visible cracks, tearing, or softness Performing front suspension repairs or sway bar service
Installing a new set of 4 bushings restores the proper preload and isolation in the stabilizer system — reducing roll, eliminating noise, and bringing back Porsche’s signature steering precision and balance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134379202
The product you are viewing cross references to these numbers
Product Information
Front Stabilizer Bar Mounting Bushing / Sway Bar Bushing, SET OF 4.Size: 16mm
This Stabilizer bar bushing is designed to replace the original 16 mm anti-roll bar mount bush used in Porsche 911 models (1974–1977) models. It secures the stabilizer bar to the chassis, allowing proper flex while isolating vibration and lateral movement.
Fits:
Porsche 911 1974 - 1977
Diagram ref no 23
• Quantity: Set of 4 pieces
• Inner Diameter: 16 mm (designed for 16 mm sway bar)
• Function: Supports and isolates the anti-roll bar from the chassis while allowing controlled movement
• Position: Front suspension — stabilizer bar mounting locations (two per side)
• Symptoms of wear: Squeaking, knocking, excessive body roll, looseness, or sway bar movement
• Benefits: OE-spec material hardness and fit, quieter ride, reduced vibration, restored bar performance, and long-term durability
• Installation: Fit each bushing over the stabilizer bar, seat securely in the bracket cradle, and fasten using the correct factory clamps or straps
Over time, stabilizer (sway) bar bushings are subjected to continuous twisting, compression, and exposure to road debris, heat, and oils. The rubber material gradually hardens, cracks, or deforms, reducing its ability to cushion the stabilizer bar and maintain tension. When this occurs, the bar can move or rattle inside its mounts, leading to reduced cornering stability and increased noise during driving.
Replace this set when:
• You hear clunking or squeaking noises from the front suspension
• The car feels less stable in corners or exhibits excessive body roll
• The bushings show visible cracks, tearing, or softness Performing front suspension repairs or sway bar service
Installing a new set of 4 bushings restores the proper preload and isolation in the stabilizer system — reducing roll, eliminating noise, and bringing back Porsche’s signature steering precision and balance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134379202
91134379202
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
4 x Front stabilizer bar bush 16mm. Porsche 911 74-77 (91134379202/1)
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Price: €44.48
Orderable - 14 to 21 Days
97034105123/2KIT
Product Information
This OE Match Front upper control arm set includes both left and right arms and all required OEM hardware for correct installation. This kit directly replaces the factory upper wishbones used on Porsche Panamera (970.2, 2014–2016) models.
Fits:
Porsche 970.2 Panamera 2014 - 2016
Diagram ref no 13, 14, 15, 16.
Set Includes:
2 × OE Match Front Upper Control Arms (97034105123 Left & Right)
with Genuine Porsche Hardware:
2 × PAF102902 (Mounting Bolts),
2 × PAF102861 (Self-Locking Nuts)
Each arm is precision-machined from forged aluminium alloy for strength and reduced unsprung weight. They feature pre-installed rubber-metal bushings and sealed ball joints, tuned to match Porsche’s original damping and articulation characteristics.
Paired with Genuine Porsche PAF102902 bolts and PAF102861 self-locking nuts, this kit ensures secure fastening, accurate torque retention, and long-term suspension stability — exactly as Porsche intended.
Front upper control arms are critical for maintaining suspension alignment and cornering stability. Over time, bushings deteriorate and ball joints loosen, leading to uneven tire wear, steering play, or knocking noises.
Replace this full set when:
• Front-end noises appear over bumps or turns
• Vehicle drifts or alignment repeatedly goes out of spec
• Suspension bushings are cracked or separating
• Performing a geometry correction or full suspension refresh
Installing the OE Match 97034105123 Set with Genuine Porsche bolts and nuts ensures your Panamera’s suspension operates with factory-level precision, comfort, and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034105123
The product you are viewing cross references to these numbers
Product Information
Wishbone Front UPPER. SET OF 2.This OE Match Front upper control arm set includes both left and right arms and all required OEM hardware for correct installation. This kit directly replaces the factory upper wishbones used on Porsche Panamera (970.2, 2014–2016) models.
Fits:
Porsche 970.2 Panamera 2014 - 2016
Diagram ref no 13, 14, 15, 16.
Set Includes:
2 × OE Match Front Upper Control Arms (97034105123 Left & Right)
with Genuine Porsche Hardware:
2 × PAF102902 (Mounting Bolts),
2 × PAF102861 (Self-Locking Nuts)
Each arm is precision-machined from forged aluminium alloy for strength and reduced unsprung weight. They feature pre-installed rubber-metal bushings and sealed ball joints, tuned to match Porsche’s original damping and articulation characteristics.
Paired with Genuine Porsche PAF102902 bolts and PAF102861 self-locking nuts, this kit ensures secure fastening, accurate torque retention, and long-term suspension stability — exactly as Porsche intended.
Front upper control arms are critical for maintaining suspension alignment and cornering stability. Over time, bushings deteriorate and ball joints loosen, leading to uneven tire wear, steering play, or knocking noises.
Replace this full set when:
• Front-end noises appear over bumps or turns
• Vehicle drifts or alignment repeatedly goes out of spec
• Suspension bushings are cracked or separating
• Performing a geometry correction or full suspension refresh
Installing the OE Match 97034105123 Set with Genuine Porsche bolts and nuts ensures your Panamera’s suspension operates with factory-level precision, comfort, and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034105123
97034105122
97034105123
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Wishbone Front UPPER. Porsche 970.2 Panamera 2014-2016 (97034105123/2)
2 x Upper control arm mount bolt. Porsche 970 Panamera 2010-16 (PAF102902)
2 x Upper control arm nut (M 10). Porsche Panamera / Cayenne / Taycan (PAF102861)
Vehicle Group
Vehicle Group
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
€249.18
Now €224.28
In Stock - 3- 5 Days Dispatch
97034105X24/2KIT
Product Information
This Front Lower Control Arm Complete Set includes both left and right lower wishbones (97034105324 + 97034105424) and all associated bushings, ball joints, and factory-style mounting hardware needed for a professional installation.
Designed for Porsche Panamera (970.2 series), this kit restores the vehicle’s factory suspension geometry, maintaining precise camber, caster, and toe alignment for exceptional handling and ride comfort. Each control arm is build to Porsche OE specifications. Features pre-installed rubber-metal bushings and sealed ball joints, ensuring smooth operation, low noise, and long service life.
Fits:
Porsche 970.2 Panamera 2014 - 2016
Diagram ref no 1 - 10, 19, 21.
The supplied OE manufactured hardware – including bolts, washers, and self-locking nuts – guarantees perfect torque retention and structural reliability under load. This complete kit provides a direct-fit, for full front suspension restoration.
• Position: Front Axle – Lower Left & Right
• Function: Connects chassis to wheel carrier, maintaining camber, caster, and toe angles
• Benefits: OE-spec geometry, full installation hardware, quiet ride, long-term reliability
• Installation: Direct-fit; replace in pairs; torque to Porsche specifications; wheel alignment required after fitting
Front lower control arms bear continuous load and articulation, and over time bushings harden and ball joints develop play, leading to clunking, vibration, and poor alignment.
Replace this full kit when:
• The vehicle shows front-end knocking or vibration over bumps
• Tires wear unevenly or steering feels loose or unstable
• Bushings or ball joints show visible wear or cracking
• Performing a front-end rebuild or geometry correction
This OE Match complete arm set provides everything required for a full, balanced restoration of your Porsche’s front suspension — delivering the crisp handling and ride comfort it had when new.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034105X24
The product you are viewing cross references to these numbers
Product Information
Complete Front Lower Control Arm Kit, SET OF 2This Front Lower Control Arm Complete Set includes both left and right lower wishbones (97034105324 + 97034105424) and all associated bushings, ball joints, and factory-style mounting hardware needed for a professional installation.
Designed for Porsche Panamera (970.2 series), this kit restores the vehicle’s factory suspension geometry, maintaining precise camber, caster, and toe alignment for exceptional handling and ride comfort. Each control arm is build to Porsche OE specifications. Features pre-installed rubber-metal bushings and sealed ball joints, ensuring smooth operation, low noise, and long service life.
Fits:
Porsche 970.2 Panamera 2014 - 2016
Diagram ref no 1 - 10, 19, 21.
The supplied OE manufactured hardware – including bolts, washers, and self-locking nuts – guarantees perfect torque retention and structural reliability under load. This complete kit provides a direct-fit, for full front suspension restoration.
• Position: Front Axle – Lower Left & Right
• Function: Connects chassis to wheel carrier, maintaining camber, caster, and toe angles
• Benefits: OE-spec geometry, full installation hardware, quiet ride, long-term reliability
• Installation: Direct-fit; replace in pairs; torque to Porsche specifications; wheel alignment required after fitting
Front lower control arms bear continuous load and articulation, and over time bushings harden and ball joints develop play, leading to clunking, vibration, and poor alignment.
Replace this full kit when:
• The vehicle shows front-end knocking or vibration over bumps
• Tires wear unevenly or steering feels loose or unstable
• Bushings or ball joints show visible wear or cracking
• Performing a front-end rebuild or geometry correction
This OE Match complete arm set provides everything required for a full, balanced restoration of your Porsche’s front suspension — delivering the crisp handling and ride comfort it had when new.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034105X24
97034105324
97034105424
97034105323
97034105423
4047437428959
4047437428768
WHT008736
97034121720
99907415000
99907415001
99908444501
PAF007648
97034124921
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Wishbone front, LOWER. Porsche 970.2 Panamera 2014-2016 (97034105324/2)
1 x Wishbone front, LOWER. Porsche 970.2 Panamera 2014-2016 (97034105424/2)
2 x Eccentric bolt for rear wishbone / track rod. Porsche 992.1 (WHT008736)
2 x Eccentric bolt for front lower wishbone. Porsche 970.2 Panamera 2014-16 (97034121720)
4 x Eccentric washer for alignment for Porsche Boxster / Cayman / 911 / Panamera / Taycan (PAF007648)
2 x Front lower control arm bolt. Porsche 970 Panamera 2010-16 (99907415001)
6 x Shock absorber hexagon hut. Porsche 996 (99908444501)
2 x Wishbone rubber mount isolator. Porsche 970 Panamera 2014>> (97034124921)
2 x Control arm hydraulic bush stop. Porsche 970 Panamera 2014>> (97034124422)
Vehicle Group
Vehicle Group
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
€717.36
Now €645.64
Orderable - 14 to 28 Days
97034105110/2KIT
Product Information
This Set of 2 includes left and right front upper control arms complete with all necessary mounting hardware (4 × bolts and 4 × nuts) for a direct, factory-quality installation. Designed to replicate the original Porsche suspension geometry, these arms ensure precise steering feedback, camber alignment, and consistent handling stability.
Fits:
Porsche 970 Panamera up to 2013
Diagram ref no 13, 14, 15 and 16.
Ideal for front-end overhauls, worn joint replacement, or alignment correction, this complete kit restores factory handling balance and comfort to your Porsche’s suspension system.
Front Upper Control Arm Set (2 × 97034105110 - Left + Right)
• Included hardware: 4 × PAF102861 (self-locking nuts), 4 × PAF102902 (mount bolts)
• Position: Front axle – upper left and right
• Function: Maintains camber and caster; links wheel carrier to chassis
• Symptoms of wear: Clunking noise, vibration, uneven tire wear, poor alignment
• Benefits: OE-quality geometry, lightweight design, quiet operation, easy installation
• Installation: Direct replacement; torque to Porsche specs; alignment recommended afterward
Front control arms endure continuous load and articulation, leading to bushing fatigue, ball joint wear, or alignment drift over time.
Replacement is recommended when:
• You notice knocking noises, uneven tire wear, or steering instability
• Suspension bushings show cracks or excessive play Performing a front-end rebuild or alignment correction
Installing the replacement 97034105110 set with fresh hardware (PAF102861 + PAF102902) ensures correct geometry, restored ride comfort, and safe, predictable handling — just as Porsche engineered.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034105110
The product you are viewing cross references to these numbers
Product Information
Front Upper control arm SET OF 2 (Left + Right) with mounting hardware.This Set of 2 includes left and right front upper control arms complete with all necessary mounting hardware (4 × bolts and 4 × nuts) for a direct, factory-quality installation. Designed to replicate the original Porsche suspension geometry, these arms ensure precise steering feedback, camber alignment, and consistent handling stability.
Fits:
Porsche 970 Panamera up to 2013
Diagram ref no 13, 14, 15 and 16.
Ideal for front-end overhauls, worn joint replacement, or alignment correction, this complete kit restores factory handling balance and comfort to your Porsche’s suspension system.
Front Upper Control Arm Set (2 × 97034105110 - Left + Right)
• Included hardware: 4 × PAF102861 (self-locking nuts), 4 × PAF102902 (mount bolts)
• Position: Front axle – upper left and right
• Function: Maintains camber and caster; links wheel carrier to chassis
• Symptoms of wear: Clunking noise, vibration, uneven tire wear, poor alignment
• Benefits: OE-quality geometry, lightweight design, quiet operation, easy installation
• Installation: Direct replacement; torque to Porsche specs; alignment recommended afterward
Front control arms endure continuous load and articulation, leading to bushing fatigue, ball joint wear, or alignment drift over time.
Replacement is recommended when:
• You notice knocking noises, uneven tire wear, or steering instability
• Suspension bushings show cracks or excessive play Performing a front-end rebuild or alignment correction
Installing the replacement 97034105110 set with fresh hardware (PAF102861 + PAF102902) ensures correct geometry, restored ride comfort, and safe, predictable handling — just as Porsche engineered.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034105110
97034105110
97034105103
PAF102902
PAF102861
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Wishbone Front UPPER. Porsche 970 Panamera >>2013 (97034105110/2)
4 x Upper control arm mount bolt. Porsche 970 Panamera 2010-16 (PAF102902)
4 x Upper control arm nut (M 10). Porsche Panamera / Cayenne / Taycan (PAF102861)
Vehicle Group
Vehicle Group
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
€257.34
Now €231.62
Orderable - 14 to 28 Days
CLUTCHKIT04.1
Product Information
10 Part Kit Contains:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CLUTCHKIT04.1
The product you are viewing cross references to these numbers
Product Information
Clutch Fork Shaft Repair Kit. 10 Part Kit Contains:
- 2 x 95011671501 Clutch release fork bushing
- 1 x 95011671004 Fork Shaft
- 2 x 99911341840 Seal
- 1 x 99920133901 Needle bearing
- 1 x 99920136501 Needle bearing
- 1 x 95011672500 Cover
- 1 x 95011671302 Support
- 1 x 90007505703 Hex bolt
Fits:
Porsche 911 1987-89
Porsche 964 1989-94 all models
Porsche 993 1994-98 all models
Porsche 996 Turbo, GT3
Porsche 997 Turbo, GT3 2005>>
Click "Zoom in" to see the diagram.
Diagram Ref No 10, 11, 17, 16, 15, 21, 14, 18.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CLUTCHKIT04.1
95011671004
99911341840
99920133900
99920136500
95011671302
95011608602
95011608603
95011608604
95030191053
99920136501
99920133901
90007505703
95011672500
95011671501
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Clutch fork shaft. Porsche 911 / 964 / 993 / 996 / 997 (95011671004/1)
2 x Seal for clutch release fork shaft. Porsche 911 / 964 / 993 / 996 turbo / 997 turbo (99911341840/1)
1 x Clutch fork shaft needle bearing. Porsche 911 / 964 / 993 / 996 / 997 (99920136501/1)
1 x Clutch fork shaft needle bearing. Porsche 911 / 964 / 993 / 996 / 997 (99920133901/1)
1 x Retaining Bracket Porsche 911 / 964 / 993 / 996 / 997 (95011671302)
1 x Hexagon-head bolt 90007505703 (90007505703)
1 x CLUTCH SHAFT COVER 95011672500 (95011672500)
2 x Clutch release fork bushing. Porsche 964 / 993 / 996 Turbo / 997 Turbo / GT3 (95011671501/1)
Vehicle Group
Vehicle Group
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
€104.40
Now €93.97
In Stock - 24 Hour Dispatch
SUSPENSIONKIT955
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT955
The product you are viewing cross references to these numbers
Product Information
Restore Your Porsche Cayenne’s Ride and Safety with Our Suspension Kit
Over time, the control arm and tie rod ball joints in your Porsche Cayenne can wear out, while the rubber bushings may degrade, tear, or oxidize. This wear can lead to uneven tire wear, front-end noise, and vibration, compromising both performance and safety. Our suspension kit restores your vehicle’s handling and ride quality, bringing it back to factory standards.
Professional Tip: A wheel alignment is recommended after installation to ensure optimal performance.
Fits:- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
Suspension Control Arm Kit
Control arms are a critical component of your vehicle’s suspension system, linking the suspension to the subframe. They are typically hinged, allowing your suspension to move smoothly over road irregularities and during turns. Vehicles with independent suspension often feature multiple arms and connection points to enhance ride comfort and stability.
As control arm bushings and joints wear, you may notice looseness or play in the suspension. While some control arms allow for individual component replacement, many require replacing the entire arm for proper function.
Signs You May Need a Control Arm Replacement
- Excessive play in suspension joints where the arms connect to the subframe or knuckle
- Buckling or clunking noises from the suspension
- Uneven tire wear
- Difficulty achieving proper wheel alignment
- Shuddering or vibration felt in the steering wheel at highway speeds
- Steering wheel pulling or wandering side-to-side
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT955
95534101733
95534101833
95534102702
95534703122
95534703222
95534719110
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Track rod inner joint and outer ball joint. Porsche Cayenne 955 / 957 / 958 (95534703122/1)
1 x Track rod inner joint and outer ball joint. Porsche Cayenne 955 / 957 / 958 (95534703222/1)
2 x Track rod rubber bellow cover. Porsche Cayenne (95534719110/1)
1 x Front lower wishbone. Porsche 955 Cayenne / 957 Cayenne (95534101733/1)
1 x Front lower wishbone. Porsche 955 Cayenne / 957 Cayenne (95534101833/1)
2 x Front upper wishbone. Porsche Cayenne (95534102702/1)
Vehicle Group
Vehicle Group
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
€549.32
Now €494.38
In Stock - 3- 5 Days Dispatch
95534703222/1KIT.1
Product Information
Fits:
Porsche 955 Cayenne 2003-06 (Front)
Porsche 957 Cayenne 2007-09 (Front)
Porsche 958 Cayenne 2010>> (Front)
All Models None Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534703222
The product you are viewing cross references to these numbers
Product Information
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries. SET OF 2Fits:
Porsche 955 Cayenne 2003-06 (Front)
Porsche 957 Cayenne 2007-09 (Front)
Porsche 958 Cayenne 2010>> (Front)
All Models None Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534703222
1144503500
95534703122
95534703222
95534703121
95534703221
95534703120
95534703220
7L0422821
7L0422803D
7L0422804C
7L0422804D
7L0422803C
95534719110
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Track rod inner joint and outer ball joint. Porsche Cayenne 955 / 957 / 958 (95534703122/1)
1 x Track rod inner joint and outer ball joint. Porsche Cayenne 955 / 957 / 958 (95534703222/1)
2 x Track rod rubber bellow cover. Porsche Cayenne (95534719110/1)
Vehicle Group
Vehicle Group
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid 380HP 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel 382HP 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
€110.56
Now €99.50
In Stock - 3- 5 Days Dispatch
95534703222/1KIT
Product Information
Fits:
Porsche 955 Cayenne 2003-06 (Front)
Porsche 957 Cayenne 2007-09 (Front)
Porsche 958 Cayenne 2010>> (Front)
All Models None Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534703222
The product you are viewing cross references to these numbers
Product Information
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries. SET OF 2Fits:
Porsche 955 Cayenne 2003-06 (Front)
Porsche 957 Cayenne 2007-09 (Front)
Porsche 958 Cayenne 2010>> (Front)
All Models None Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534703222
1144503500
95534703122
95534703222
95534703121
95534703221
95534703120
95534703220
7L0422821
7L0422803D
7L0422804C
7L0422804D
7L0422803C
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Track rod inner joint and outer ball joint. Porsche Cayenne 955 / 957 / 958 (95534703122/1)
1 x Track rod inner joint and outer ball joint. Porsche Cayenne 955 / 957 / 958 (95534703222/1)
Vehicle Group
Vehicle Group
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid 380HP 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel 382HP 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
€84.94
Now €76.44
In Stock - 24 Hour Dispatch
477407153F/1KIT.2
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477407153F
The product you are viewing cross references to these numbers
Product Information
Front lower suspension arm kit. Porsche 924 1979>> Onwards
Kit includes
Lower arm x 2
Front arm bush x 2
Rear arm bush x 2
Fits:
Porsche 924 1979>> Onwards
Click 'zoom in' for large parts diagram.
Diagram Ref No 2, 7 and 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477407153F
171407182D
477407153F
477407181B
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Wishbone front. Porsche 924 1976-81 (477407153F/1)
2 x Wishbone inner bush rear. Porsche 924S / 944 (477407181B/1)
2 x Wishbone inner bush, Front. Porsche 924S / 944 (171407182D/1)
Vehicle Group
Vehicle Group
- Porsche 924 2.0L 1976-79
€321.64
Now €289.48
In Stock - 3- 5 Days Dispatch
477407153F/1KIT.1
Product Information
Kit includes
Lower arm x 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477407153F
The product you are viewing cross references to these numbers
Product Information
Front lower suspension arm kit. Porsche 924 Up to 1978Kit includes
Lower arm x 2
Front arm bush x 2
Rear arm bush x 2
Fits:
Porsche 924 >> Up to 1978
Click 'zoom in' for large parts diagram.
Diagram Ref No 2, 7 and 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477407153F
171407182D
PCG407181A
477407153F
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Wishbone front. Porsche 924 1976-81 (477407153F/1)
2 x Wishbone inner bush rear. Porsche 924 >>1978 (PCG407181A/1)
2 x Wishbone inner bush, Front. Porsche 924S / 944 (171407182D/1)
Vehicle Group
Vehicle Group
- Porsche 924 2.0L 1976-79
€240.96
Now €216.88
In Stock - 3- 5 Days Dispatch
99610418059/3.3KIT
Product Information
Engine Cylinder Head Gasket Kit
The cylinder head gasket is a critical component that seals the cylinder head to the engine block. It serves several key functions, It seals the combustion chamber, ensuring proper compression for efficient engine performance. It prevents coolant and engine oil from mixing by sealing the fluid passages between the cylinder head and engine block.
Fits:
Diagram ref no 19 & 20.
Signs of Cylinder Head Gasket Failure
A failing head gasket can lead to serious engine problems. Common symptoms include:
Engine overheating
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610418059
The product you are viewing cross references to these numbers
Product Information
Cylinder head bolt long & head gaskets Porsche 997 3.8LEngine Cylinder Head Gasket Kit
The cylinder head gasket is a critical component that seals the cylinder head to the engine block. It serves several key functions, It seals the combustion chamber, ensuring proper compression for efficient engine performance. It prevents coolant and engine oil from mixing by sealing the fluid passages between the cylinder head and engine block.
Fits:
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
Diagram ref no 19 & 20.
Signs of Cylinder Head Gasket Failure
A failing head gasket can lead to serious engine problems. Common symptoms include:
Engine overheating
- Low cylinder compression
- External coolant or oil leaks
- White smoke from the exhaust
- Bubbles in the radiator or coolant reservoir
- Milky or white-colored engine oil
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610418059
99710420103
99710420102
99610418058
99610418059
99610418053
99610418055
99610418056
99610418054
99610418057
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
24 x Cylinder head bolt long. Porsche Boxster / Cayman / 996 / 997 (99610418059/3)
2 x Engine head gasket. Porsche 997 C2S / 997 C4S (99710420103/1)
Vehicle Group
Vehicle Group
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
€223.20
Now €216.20
Due In 11 Days
99610418059/3.2KIT
Product Information
Fits:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610418059
The product you are viewing cross references to these numbers
Product Information
Cylinder head bolt long & head gaskets Porsche 996 3.6L / Cayman 3.4L Engine Cylinder Head Gasket Kit
The cylinder head gasket is a critical component that seals the cylinder head to the engine block. It serves several key functions, It seals the combustion chamber, ensuring proper compression for efficient engine performance. It prevents coolant and engine oil from mixing by sealing the fluid passages between the cylinder head and engine block.
Signs of Cylinder Head Gasket Failure
A failing head gasket can lead to serious engine problems. Common symptoms include:
- Engine overheating
- Low cylinder compression
- External coolant or oil leaks
- White smoke from the exhaust
- Bubbles in the radiator or coolant reservoir
- Milky or white-colored engine oil
Fits:
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Boxster 987 S 3.4L 2005-08/08
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 S / GTS 3.4L 2012-16
Click 'Zoom in' for large parts diagram
Diagram ref no 19 & 20.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610418059
99610420104
99610420102
99610418058
99610418059
99610418053
99610418055
99610418056
99610418054
99610418057
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
24 x Cylinder head bolt long. Porsche Boxster / Cayman / 996 / 997 (99610418059/3)
2 x Engine head gasket. Porsche Boxster / Cayman / 996 / 997 (99610420104/1)
Vehicle Group
Vehicle Group
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche Cayman S 3.4L 987C 2005-08
€237.24
Now €228.82
Due In 11 Days
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information