OE Match

Mounting hardware kit for horn.
For cars with Butterfly or Hockey puck type horn button

Fits:
Porsche 911 1965-73
Porsche 914 1970-76

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161391500

The product you are viewing cross references to these numbers

Steering wheel locking bayonet for horn.
For cars with Butterfly or Hockey puck type horn button

Fits:
Porsche 911 1965-73
Porsche 914 1970-76

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161391500

The product you are viewing cross references to these numbers

Bumper over-rider bar bolt.



Made from 303 Stainless Steel, this stud bolt mounts in the chrome bumper guards where the over-rider tubes attach.

Fits:
Porsche 356 A (1955-1959)

Sold individually.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SMC000012

The product you are viewing cross references to these numbers

Replacement Coolant reservoir / expansion tank cap.
This coolant expansion tank cap is a direct replacement for Porsche 996 (1998–2005) and also fits Boxster (986/987), Cayman, and 997 models, upgrading earlier versions with improved sealing and pressure control.

Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2005 - 2008
Porsche 987C.1 Cayman 2005 - 2008

Diagram ref no 5

This cap serves as the pressure seal for the coolant expansion tank, keeping the cooling system at the correct pressure. It regulates venting to the overflow reservoir, preventing blowback, leaks, and overpressure while helping avoid coolant loss, boiling, and overheating.

It replaces earlier versions: 99610644700, 99610644701, 99610644702, 99610644703

Why replacement matters:
• An old or worn cap may fail to hold pressure, causing coolant to boil, vaporize, or overflow
• A bad cap can allow air to enter the cooling system, leading to overheating, hot spots, or poor cooling performance
• A leaking or weak cap can lead to gradual coolant loss, requiring refills and risking engine damage

Installing an OE-Match version restores proper pressure control, reliable sealing, and helps maintain engine temperature stability.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610644704

The product you are viewing cross references to these numbers

Crankcase through bolt washer.



Fits:
Porsche 911 1965-89
Porsche 914-6 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110116103

The product you are viewing cross references to these numbers

Convertible roof electric motor.



Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98662411701

The product you are viewing cross references to these numbers

Shock absorber supporting rubber.

Fits:
Porsche 928 1978-95

Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833304301

The product you are viewing cross references to these numbers

Shock absorber union nut.
Front.



Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-88

Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

171412045

The product you are viewing cross references to these numbers

Rear wheel bearing cover plate.



Fits:
Porsche 911 1965-73
Porsche 912

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133156100

The product you are viewing cross references to these numbers

Rear wheel bearing cover plate.

Fits:
Porsche 911 1974-89 (not Turbo)

Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133156130

The product you are viewing cross references to these numbers

Shock absorber additional spring. fits the FRONT cars with sport shock I475 / I030 one additional spring is required for each shock absorber, the price is each. This is for the shock absorber as an additional spring, also known as a bump stop, stopper or helper spring, designed for the front strut assemblies on Porsche 997 models equipped with the PASM electronic damper control (with sport shock I475 / I030). 

 Fits: 

• Porsche 997 Carrera 2 3.6L 2005>> 
• Porsche 997 Carrera 2S 3.8L 2005>> 
• Porsche 997 Carrera 4 3.6L 2005>> 
• Porsche 997 Carrera 4S 3.8L 2005>> 
• Porsche 997 TURBO 2007>> 
• Porsche 997 GT3 2007>> 
• Porsche 997 GT2 2007>> 
• Porsche 997 MKII Carrera C2 3.6L 2009>> 
• Porsche 997 MKII Carrera C4 3.6L 2009>> 
• Porsche 997 MKII Carrera C2S 3.8L 2009>> 
• Porsche 997 MKII Carrera C4S 3.8L 2009>> 
• Porsche 997 MKII GT3 2010>> 
• Porsche 997 MKII Turbo 2009>> 
• Porsche 997 MKII GT2 RS 2011>> 

This acts as a progressive load-bearing element, cushioning the suspension when the strut nears full compression. It helps prevent harsh bottoming-out, protecting both the strut and chassis from damage during aggressive driving or over bumps. These components maintain ride quality and handling performance, especially under heavy loading or spirited cornering, keeping the suspension linear and controlled. 

Common Issues & Considerations Wear or Deterioration: Over time, the rubber can compress, crack, or lose elasticity, diminishing its effectiveness. This can lead to harsher suspension impacts at full compression. Noise or Harsh Feedback: A worn or hardened bump stop can transmit noise or impacts through the cabin, particularly over rough roads or speed bumps. Sport vs. Standard Suspension: These parts are specific to Sport chassis models. Non-sport setups may not have the same bump stops or use different part numbers, so swapping or replacing must be done accordingly. 

 Click 'Zoom in' for large parts diagram. Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99733310501

The product you are viewing cross references to these numbers

Manifold rubber seal.
Replacement  rubber intake sleeve / connecting hose manufactured to original Porsche specifications. This direct-fit replacement restores airtight sealing between the air flow meter and intake manifold, preventing leaks and ensuring precise fuel metering for smooth, powerful performance.
Sold each.

Fits:
Porsche 964 C2 / C4 1989 - 1994
Porsche 964 Carrera RS
Porsche 993 C2 / C4 1994 - 1995
Porsche 993 Turbo 1994 - 1998

This product supersedes Porsche's old part numbers:
- 96411068601
- 96411068603

Diagram ref no 5.

Material: Heat- and oil-resistant rubber compound
Function: Seals air distributor to intake runners; prevents vacuum leaks
Position: Between intake plenum and cylinder head manifolds
Replacement Interval: During intake removal, rebuild, or when cracks are visible
Benefits: Restores proper airflow, stable idle, and factory performance consistency

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411068604

The product you are viewing cross references to these numbers

Shock absorber compensating plate.
Front.



Fits:
Porsche 996 C4 / C4S / TURBO 1999-05
Porsche 997 C4 / C4S MKI 2007-08
Porsche 997 C4 / C4S MKII 2009-10
Porsche 997 Turbo MKI & MKII 2007>>

Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9963435250

The product you are viewing cross references to these numbers

Shock absorber additional spring.




Porsche 987 MKII Boxster 2009>>
Porsche 987C MKII Cayman 2009>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98733330101

The product you are viewing cross references to these numbers

Shock absorber additional spring.
The replacement helper spring / bump stop assembly for the rear shock absorber on Porsche 987 Boxster and Cayman vehicles. This bump stop is designed to sit atop or within the rear shock/strut assembly, supporting the suspension’s load under compression, preventing harsh bottoming, and helping maintain ride height and handling balance. Manufactured to match Porsche’s original specification in terms of dimensions and elasticity.


Porsche 987 Boxster 2006 - 2008
Porsche 987 MKII Boxster 2009 - 2012
Porsche 987C Cayman 2005 - 2008
Porsche 987C MKII Cayman 2009 - 2012
Porsche 718C (982C)  Cayman 2017>>
Porsche 718 (982) Boxster 2017>>

Diagram ref no 8

• Position on Vehicle: Rear suspension, installed within or adjacent to the shock absorber/strut assembly on the rear axle - acts as secondary support (helper spring) or as bump stop to cushion full compression of the suspension.

• Applications: Ideal when your rear suspension exhibits signs of bottoming, excessive squat under load, or the helper-spring/bump stop is missing, fatigued or deformed - improving ride quality, maintaining correct ride height, and preserving handling performance.

The helper spring / bump stop is a critical yet often overlooked component of the rear suspension system. It steps in under heavier loads, sharp compressions or lowered ride-height scenarios to prevent suspension harsh-bottoming, maintain ride height and preserve handling geometry. When the part is worn or missing, you may experience a harsh “clunk” on full compression, inconsistent ride height, rear suspension instability or accelerated wear of other suspension components. Replacing it restores correct support, prolongs suspension life and ensures your car handles the way it was engineered.

When and why to replace:
• Rear suspension bottoms out prematurely under moderate load or when cornering.
• Noticeable change in ride height, rear sagging or uneven posture under load.
• After replacement of rear shock absorbers or other suspension components where the helper spring/bump stop may have been removed or reused.
• High-mileage vehicle where the original component may have degraded or compressed with age.
• If you have lowered or modified your suspension and want to ensure secondary support matches the rest of the system.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98733330100

The product you are viewing cross references to these numbers

Anti roll bar bracket. Rear axle.
Price is for each.



Fits:
Porsche 911 1965-71

Click 'Zoom in' for large parts diagram.
Diagram ref no 12.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133390101

The product you are viewing cross references to these numbers