Porsche

Fits:
Porsche 95B.1 Macan 2.0L 2014-18
Porsche 95B.2 Macan 2.0L 2019-21 T2G
Porsche 95B.3 Macan 2.0L 20122>> T2G

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

• 保时捷 992.1 Carrera 2S / GTS 3.0L 2019-24
• 保时捷 992.1 Carrera 4S / GTS 3.0L 2019-24
• 保时捷 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-2024
• 保时捷 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-2024
• 保时捷 992.1 Targa 4S / GTS 3.0L 2020-24

• 保时捷 992.2 Carrera 2 3.0L 2024>>
• 保时捷 992.2 Carrera 2 3.0L敞篷跑车 2024款>>

Porsche Tequipment offers a Manthey Performance Kit for the current 911 GT3 for even better performance on circuits. The 911 GT3 with Manthey Performance Kit lapped the Nürburgring's Nordschleife in 6:55.737 minutes. This is exactly 4.19 seconds faster than the 911 GT3 without kit.

The modifications are focused on aerodynamics and chassis components. The new Performance Kit was developed in close collaboration between the Porsche engineers in Weissach and the Nordschleife specialists from Manthey in Meuspath. The Porsche Tequipment circuit-optimised components are sold through Porsche Centres.

Significant increase in downforce

The extensive changes to the aero package are what make the Manthey Performance Kit for the 911 GT3 recognisable. A larger spoiler lip and side flaps are fitted at the front of the car. In conjunction with the modified air guide elements on the underbody, they increase the downforce on the front axle. The modifications at the rear are even more pronounced. The swan-neck-supported wing of the 911 GT3 is wider, and now features a tear-off edge (Gurney). The end plates with their distinctive Manthey logos have also been enlarged, as has the wing’s angle of attack. The fins of the rear diffuser have been extended and are now made of CFRP. The aerodiscs on the rear wheels, which are also made of CFRP, further enhance the car’s aerodynamic efficiency.

In collaboration with Manthey, Porsche has developed special four-way coilover suspension for the 911 GT3 that can be adapted for use on the circuit. The suspension struts can be adjusted to four positions, and rebound and compression can be tweaked without tools. The moderate changes to the spring rates (10 percent higher on the front axle, seven percent lower on the rear) contribute to improved on-the-limit handling, without making any compromises necessary when it comes to day-to-day usability.

Adaptable coilover suspension

A lightweight forged wheel set with 20- and 21-inch rims is available as an option for the Porsche 911 GT3. They reduce unsprung mass by a total of 7.3 kilograms. They are available in Brilliant Silver, Dark Silver, Neodyme and (satin-gloss) Black. A set of brake lines with steel braids come as standard with the kit. They guarantee a very precise pressure point and thereby ensure optimal modulation of the brakes. Special racing brake pads are available as an option for the 911 GT3 with the Manthey Performance Kit. Door projectors and illuminated door sill guards with the Manthey logo help to personalise the car visually. A towing loop is also included in the kit.

Porsche Tequipment offers a Manthey Performance Kit for the current 911 GT3 for even better performance on circuits. The 911 GT3 with Manthey Performance Kit lapped the Nürburgring's Nordschleife in 6:55.737 minutes. This is exactly 4.19 seconds faster than the 911 GT3 without kit.

The modifications are focused on aerodynamics and chassis components. The new Performance Kit was developed in close collaboration between the Porsche engineers in Weissach and the Nordschleife specialists from Manthey in Meuspath. The Porsche Tequipment circuit-optimised components are sold through Porsche Centres.

Significant increase in downforce

The extensive changes to the aero package are what make the Manthey Performance Kit for the 911 GT3 recognisable. A larger spoiler lip and side flaps are fitted at the front of the car. In conjunction with the modified air guide elements on the underbody, they increase the downforce on the front axle. The modifications at the rear are even more pronounced. The swan-neck-supported wing of the 911 GT3 is wider, and now features a tear-off edge (Gurney). The end plates with their distinctive Manthey logos have also been enlarged, as has the wing’s angle of attack. The fins of the rear diffuser have been extended and are now made of CFRP. The aerodiscs on the rear wheels, which are also made of CFRP, further enhance the car’s aerodynamic efficiency.

In collaboration with Manthey, Porsche has developed special four-way coilover suspension for the 911 GT3 that can be adapted for use on the circuit. The suspension struts can be adjusted to four positions, and rebound and compression can be tweaked without tools. The moderate changes to the spring rates (10 percent higher on the front axle, seven percent lower on the rear) contribute to improved on-the-limit handling, without making any compromises necessary when it comes to day-to-day usability.

Adaptable coilover suspension

A lightweight forged wheel set with 20- and 21-inch rims is available as an option for the Porsche 911 GT3. They reduce unsprung mass by a total of 7.3 kilograms. They are available in Brilliant Silver, Dark Silver, Neodyme and (satin-gloss) Black. A set of brake lines with steel braids come as standard with the kit. They guarantee a very precise pressure point and thereby ensure optimal modulation of the brakes. Special racing brake pads are available as an option for the 911 GT3 with the Manthey Performance Kit. Door projectors and illuminated door sill guards with the Manthey logo help to personalise the car visually. A towing loop is also included in the kit.