防侧翻杆衬套

Front Stabilizer Bar Mounting Bushing / Sway Bar Bushing, SET OF 4.
Size: 16mm
This Stabilizer bar bushing is designed to replace the original 16 mm anti-roll bar mount bush used in Porsche 911 models (1974–1977) models. It secures the stabilizer bar to the chassis, allowing proper flex while isolating vibration and lateral movement.

Fits:
Porsche 911 1974 - 1977

Diagram ref no 23

• Quantity: Set of 4 pieces
•  Inner Diameter: 16 mm (designed for 16 mm sway bar)
•  Function: Supports and isolates the anti-roll bar from the chassis while allowing controlled movement
•  Position: Front suspension — stabilizer bar mounting locations (two per side)
•  Symptoms of wear: Squeaking, knocking, excessive body roll, looseness, or sway bar movement
•  Benefits: OE-spec material hardness and fit, quieter ride, reduced vibration, restored bar performance, and long-term durability
•  Installation: Fit each bushing over the stabilizer bar, seat securely in the bracket cradle, and fasten using the correct factory clamps or straps

Over time, stabilizer (sway) bar bushings are subjected to continuous twisting, compression, and exposure to road debris, heat, and oils. The rubber material gradually hardens, cracks, or deforms, reducing its ability to cushion the stabilizer bar and maintain tension. When this occurs, the bar can move or rattle inside its mounts, leading to reduced cornering stability and increased noise during driving.

Replace this set when:
•  You hear clunking or squeaking noises from the front suspension
•  The car feels less stable in corners or exhibits excessive body roll
•  The bushings show visible cracks, tearing, or softness Performing front suspension repairs or sway bar service

Installing a new set of 4 bushings restores the proper preload and isolation in the stabilizer system — reducing roll, eliminating noise, and bringing back Porsche’s signature steering precision and balance.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134379202

您正在查看的产品与这些编号存在交叉引用关系

Stabilizer bar / Drop link bush kit, Rear - 18mm
High-quality OE Match suspension service kit designed to replace all rear anti-roll bar drop link bushes on Porsche 911 models fitted with an 18 mm rear stabilizer bar. Supplied as a complete set, it allows both sides of the rear suspension to be refreshed at the same time.
SET OF 4

Fits:
Porsche 911 1974 - 1977 Rear
Porsche 911 Turbo 1975 - 1977

Diagram ref no 13

This OE Match set of four is ideal for suspension refresh work, anti-roll bar servicing, or preventative maintenance, providing a cost-effective alternative to genuine OE parts while maintaining correct fit and function.  

The stabilizer bar drop link bushes provide a flexible mounting interface between the rear anti-roll bar links and suspension components. As a complete set, they ensure uniform load transfer, controlled body roll, and reduced vibration across both sides of the rear suspension.

Function:
• Supports and cushions rear stabilizer bar drop link connections
• Maintains correct suspension geometry and roll control
• Reduces noise, vibration, and harshness at the link interface
• Design for correct fit, alignment, and durability
• Supplied as a full rear axle set for balanced handling

Replacing stabilizer bar bushes individually can lead to uneven suspension behaviour. Installing a complete OE Match set ensures consistent compliance on both sides of the rear axle, improving cornering stability, steering feedback, and overall ride quality while eliminating suspension noise caused by worn bushes.

When to replace:
•  Noticeable clunking or squeaking from the rear suspension
•  Reduced handling precision or increased body roll
•  Cracked, hardened, or visibly worn bush material
•  After replacing stabilizer bar links or other suspension components
•  As part of a comprehensive suspension refresh

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133379305

您正在查看的产品与这些编号存在交叉引用关系

Stabilizer Bar Bush Front set, Size: 22mm
This OE Match stabilizer bar bush set includes 4 replacement rubber mounting bushes for the 22mm stabilizer bar. The set is designed to match the original-style fitment and function, helping restore correct anti-roll bar mounting and suspension control.
SET OF 4  bushes

Fits:
Porsche 911 1984-86 3.2L and Turbo Front axle - Please choose by size
Porsche 911 1987-89 3.2L and Turbo Front axle

Diagram ref no 24

The stabilizer bar bushes hold the anti-roll bar securely in position while allowing controlled movement as the suspension operates. Correctly fitted bushes help reduce body roll, improve handling stability, and minimise knocking or looseness from the stabilizer bar mounting areas.

Functions
•  Replaces all 4 stabilizer bar bushes
•  Suitable for 22mm stabilizer bar applications
•  Supports and locates the anti-roll bar
•  Helps reduce body roll during cornering
•  Helps maintain stable suspension response
•  Reduces unwanted bar movement, knocking, and vibration
•  OE Match replacement set for Porsche 911 suspension service

Why Replace This Set?
Stabilizer bar bushes are exposed to road dirt, moisture, suspension load, vibration, and age. Over time, rubber bushes can crack, harden, split, compress, or wear, allowing excess anti-roll bar movement. Worn bushes may cause suspension knocking, vague handling, increased body roll, or failed inspection. Replacing all four bushes together helps restore balanced anti-roll bar support and suspension control.

When to Replace This Set
•  Suspension knocking or clunking is present
•  Stabilizer bar bushes are cracked, split, worn, or missing
•  Body roll feels excessive during cornering
•  Anti-roll bar or suspension service is being carried out
•  The stabilizer bar feels loose in its mounting points
•  The vehicle has failed inspection due to suspension bush wear
•  The car is undergoing Porsche 911 suspension restoration.

Where it fits on the car
This bush set fits at the stabilizer bar mounting points on Porsche 911 models from 1984 to 1989. It is used with a 22mm stabilizer bar.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134388100

您正在查看的产品与这些编号存在交叉引用关系

Stabilizer bar bush set, Front, Size: 20mm.
This rubber‐bush is designed to replace the original 20 mm front anti-roll bar bushes used in the front suspension of classic Porsche 911/930 models (front axle). It fits both the inner and outer mounting points of the stabiliser bar and is suitable for left and right sides.
SET OF 4 bushes

Fits:
Porsche 911 1974 - 1986 Front axle
Porsche 911 Turbo (930) 1975 - 1986 Front axle

Diagram ref no 24.

These bushes cushion the 20 mm diameter front anti-roll (sway) bar mountings, reducing metal-on-metal contact, dampening vibration and noise, and maintaining proper bar alignment under dynamic load. With worn or hardened bushes, the bar can move excessively, causing increased body roll, clunks or changes in handling.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134379203

您正在查看的产品与这些编号存在交叉引用关系

衬套套件悬架重建。

前桥和后桥

适合:
保时捷 911 - 1977 年至 1986 年
保时捷 911 Turbo - 1977 年至 1988 年

采用标准 Shore 等级（未升级）的悬架衬套重建套件

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SUSPBUSHKIT

您正在查看的产品与这些编号存在交叉引用关系

使用标准岸衬套的悬架重建套件。前后轴

适合:
保时捷 911E - 1970 年至 1973 年
保时捷 911T - 1970 年至 1973 年
保时捷 911S - 1970 年至 1973 年

采用标准 Shore 等级（未升级）的悬架衬套重建套件

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SUSPBUSHKIT

您正在查看的产品与这些编号存在交叉引用关系

悬架衬套重建。前后桥

适合:
保时捷 911 - 1974 年至 1976 年

请检查前防倾杆厚度 - 16mm 或 20mm

采用标准 Shore 等级（未升级）的悬架衬套重建套件

衬套套件悬架重建。

前桥和后桥

适合:
保时捷 911 - 1987 年至 1989 年 - G50 变速箱

采用标准 Shore 等级（未升级）的悬架衬套重建套件

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SUSPBUSHKIT

您正在查看的产品与这些编号存在交叉引用关系

衬套套件悬架重建。

前桥和后桥

适合:
保时捷 911 turbo 3.0升 - 1975 年至 1976 年

采用标准 Shore 等级（未升级）的悬架衬套重建套件

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SUSPBUSHKIT

您正在查看的产品与这些编号存在交叉引用关系

衬套套件悬架重建。

前桥和后桥

适合:
保时捷 911 Turbo - 1989 年 - G50 变速箱

采用标准 Shore 等级（未升级）的悬架衬套重建套件

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SUSPBUSHKIT

您正在查看的产品与这些编号存在交叉引用关系