OE Match

Indicator Lens Front, With BLACK Rim For USA Cars.
Restore the appearance and visibility of your classic Porsche’s front lighting with this OE Match Front Indicator Lens with Black Rim, designed for USA-spec cars. Produced as a replacement for references 91163194700/1 and 91163194800/1, it combines an original-style indicator lens with a contrasting black surround for a clean, period-correct finish.

Fits:

This replacement is ideal where the existing lens has become cracked, faded, cloudy, damaged, or is missing. The included black rim also allows both the lens and its surrounding trim to be renewed together, helping restore a secure fit and consistent exterior appearance. 

What This Product Does: 

• Covers and protects the indicator bulb and lamp housing.
• Allows the flashing turn signal to remain clearly visible to other road users.
• Helps prevent water, dirt, dust, and road debris from entering the light assembly.
• Provides a finished, factory-style appearance with its integrated black rim.
• Replaces the corresponding left- or right-hand front indicator lens, depending on the selected reference.
• Helps maintain the correct appearance of USA-spec front lighting.

Symptoms Of Wear Or Failure:

• Cracks, chips, splits, or impact damage in the lens.
• Fading, yellowing, or discolouration.
• Clouding or dullness that reduces indicator visibility.
• A scratched, faded, warped, or damaged black rim.
• Moisture or condensation inside the indicator housing.
• Loose, broken, or deteriorated mounting points.
• A lens that no longer sits securely against the lamp housing.
• Water staining, corrosion, or bulb failure inside the light unit.
• A missing lens or rim.
• Reduced light output despite the bulb working correctly.

Why Replacement Matters:

• A damaged or deteriorated indicator lens can reduce the visibility of the turn signal, making it harder for other road users to understand your intentions. This is especially important in poor weather, bright sunlight, or low-light driving conditions.
• Cracks, gaps, and damaged mounting points can also allow moisture and contamination into the lamp housing. Over time, this may cause corrosion, poor electrical connections, intermittent operation, and premature bulb failure.
• Replacing the lens restores clear signalling, protects the internal components, and improves the presentation of the vehicle. The black-rimmed design also helps retain the correct period appearance and supports the originality and value of a classic Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163194

The product you are viewing cross references to these numbers

Indicator Lens Front, With CHROME Rim For USA Cars.
Restore the original appearance and visibility of your classic Porsche’s front lighting with this OE Match Front Indicator Lens with Chrome Rim, designed for USA-spec cars. Manufactured as a replacement for references 90163190305/1 and 90163190405/1, the lens combines an original-style indicator cover with a polished chrome surround for a period-correct finish.
It is suitable for replacing a cracked, faded, damaged, or missing front indicator lens while retaining the classic factory look. The integrated chrome rim also makes it a convenient replacement where both the lens and surrounding trim have deteriorated.  

Fits:

What This Product Does:

• Covers and protects the front indicator bulb and lamp housing.
• Allows the flashing turn signal to remain clearly visible to other road users.
• Helps prevent dirt, water, and road debris from entering the light assembly.
• Provides a finished, factory-style appearance through the integrated chrome rim.
• Replaces the corresponding left- or right-hand front indicator lens, depending on the selected reference.

Symptoms Of Wear Or Failure:

• Cracks, chips, or splits in the lens.
• Fading, yellowing, or discolouration.
• A cloudy or dull lens that reduces light output.
• A dented, scratched, corroded, or peeling chrome rim.
• Moisture or condensation inside the indicator housing.
• Loose, damaged, or broken mounting points.
• A poorly fitting or missing lens.
• Reduced indicator visibility, even when the bulb is working correctly.

Why Replacement Matters:

• A worn or damaged indicator lens can make the turn signal less visible, particularly in poor weather or low-light conditions. Cracks and damaged mounting areas may also allow moisture and contamination into the lamp housing, which can lead to corrosion, electrical faults, and premature bulb failure.
• Replacing the lens restores clear signalling, protects the internal components, and improves the presentation of the vehicle. The chrome-rimmed design also helps preserve the authentic exterior detailing and overall value of a classic Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163190

The product you are viewing cross references to these numbers

Indicator Unit With Lens & Seal (SWB) For USA Cars.
Size Approx: 30cm x 6cm.

Restore the safety, functionality, and authentic appearance of your classic Porsche with this OE Match Rear Indicator Unit with Lens & Seal, designed for USA-spec Short Wheelbase (SWB) Porsche 911 models. Supplied as a complete assembly including the indicator housing, lens, and sealing gasket, this direct replacement provides an original equipment-style fit and finish. Manufactured to match factory specifications, it is ideal for restoration projects or replacing worn, damaged, or leaking original units.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F) (For USA Cars)
  
  

What This Product Does:

• Provides a complete rear turn signal assembly for safe and reliable signalling.
• Houses and protects the indicator bulb and electrical components.
• Includes a new lens and seal to help prevent water and dirt from entering the lamp assembly.
• Restores the original factory appearance and correct fitment of USA-spec SWB Porsche 911 models.  

Symptoms Of Wear Or Failure:

• Cracked, faded, or broken indicator lens.
• Water or condensation inside the lamp assembly.
• Corroded bulb holder or electrical terminals.
• Damaged or perished sealing gasket causing leaks.
• Broken housing or mounting points.
• Intermittent or non-functioning rear indicator despite replacing the bulb.
• Loose or poorly fitting lamp assembly.  

Why Replacement Matters:

• A damaged or worn rear indicator unit can reduce the visibility of your turn signals, increasing the risk of accidents and potentially causing your vehicle to fail roadworthiness inspections. Failed seals allow moisture to enter the housing, leading to corrosion, electrical faults, and repeated bulb failures. Replacing the complete indicator unit restores dependable signalling, protects the electrical system from water damage, improves vehicle safety, and preserves the original appearance and value of your classic Porsche.  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163140

The product you are viewing cross references to these numbers

Indicator Lens Rear Without Rim (SWB) For USA Cars.
Restore the original appearance and safe operation of your classic Porsche with this OE Match Rear Indicator Lens Without Rim, designed for USA-spec Short Wheelbase (SWB) Porsche 911 models (1963–1968). Manufactured to match original equipment specifications, this replacement lens fits directly onto the existing rear indicator housing, providing a correct fit and authentic period-correct appearance. Supplied without the outer rim, it is ideal for replacing a damaged or faded lens while reusing the original trim. Compatible with reference numbers 91163192301/1 (Left) and 91163192401/1 (Right).   

Fits:


What This Product Does:

• Covers and protects the rear turn signal bulb and lamp housing.
• Ensures the indicator light is clearly visible to other road users.
• Prevents moisture, dirt, and road debris from entering the lamp assembly.
• Maintains the original factory appearance of early USA-spec SWB Porsche 911 models.  

Symptoms Of Wear Or Failure:

• Cracks, chips, or broken sections in the lens.
• Faded or discoloured plastic reducing light output.
• Cloudy or hazed lens affecting indicator visibility.
• Water or condensation inside the lamp assembly.
• Loose or damaged mounting points.
• Lens missing or no longer securely attached.  

Why Replacement Matters:

• A damaged rear indicator lens can reduce the brightness and visibility of your turn signals, making it harder for other drivers to see your intentions. Cracked or poorly sealed lenses allow water and dirt to enter the lamp housing, leading to bulb failure, corrosion of electrical contacts, and potential damage to the lamp unit. Replacing a worn lens restores reliable signalling, helps maintain road safety and legal compliance, and preserves the authentic appearance and value of your classic Porsche.  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163192

The product you are viewing cross references to these numbers

Indicator Unit With Lens & Seal (SWB) For USA Cars.
Size Approx: 30cm x 6cm
The OE Match Indicator Unit with Lens & Seal (SWB) for USA Cars is a premium-quality replacement front indicator assembly designed for short wheelbase (SWB) Porsche models built to USA specification. Supplied complete with the lens and sealing gasket, this OE-style indicator unit restores the original appearance, weather protection and signalling performance of the front lighting system.  


Fits:

Manufactured to OE specifications for fit, finish and durability, the housing, lens and seal are engineered to provide a secure installation while protecting the internal bulb holder and electrical connections from moisture and road debris. Precision-manufactured to replicate the original Porsche dimensions and mounting points, the assembly is ideal for restoration projects, accident repairs or replacing aged, cracked or damaged original indicator units.  

What This Product Does:

• Provides front direction indicator signalling.
• Improves vehicle visibility when turning or changing lanes.
• Includes a lens and sealing gasket for a complete installation.
• Helps protect the lighting assembly from water and dirt ingress.
• Restores the original appearance of the front bodywork.
• Maintains compliance with the original USA-specification lighting design.
• Replaces worn, damaged or leaking indicator units.
• Forms an essential part of the vehicle's exterior lighting system.

Symptoms Of Wear Or Failure:

• Cracked, faded or discoloured indicator lens.
• Water or condensation inside the lamp assembly.
• Perished or damaged sealing gasket.
• Loose or damaged housing.
• Reduced visibility of the indicator signal.
• Moisture-related electrical faults.
• Corroded internal lamp contacts.
• Lens becoming detached or poorly secured.
• Deterioration caused by UV exposure or impact damage.
• Poor overall appearance of the front lighting assembly.

Why Replacement Matters:

• The front indicator unit is continually exposed to sunlight, rain, road debris, stone impacts and changing temperatures. Over time, the lens can become cloudy, faded or cracked, while the seal may harden or deteriorate, allowing moisture to enter the lamp assembly and accelerate corrosion of the internal electrical components.
• A damaged indicator assembly can reduce the visibility of turn signals, increase the likelihood of electrical faults and detract from the appearance of the vehicle. Water ingress may also shorten bulb life and affect the reliability of the lighting system.
• Replacing the original component with the OE Match Indicator Unit with Lens & Seal restores the correct appearance, weather protection and dependable signalling performance. Manufactured to OE standards using high-quality materials, it provides factory-style fitment, excellent durability and reliable long-term performance, making it an ideal choice for maintaining the safety and originality of your classic Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163140

The product you are viewing cross references to these numbers

Indicator lens Front, without rim for USA cars
Size approx.: 30cm x 6cm

These OE Match front indicator lenses are replacement front turn signal / indicator lenses for short wheelbase Porsche 911 and 912 USA models from 1965 to 1968. They are supplied without rim and are available as left or right side single parts.

Fits:
Porsche 911/912 1965-68 Short Wheel Based cars (SWB) for USA cars

Please check the lenses you have are the same dimensions.

The front indicator lens covers the front indicator lamp assembly and allows the turn signal light to be clearly visible from the front of the vehicle. It also helps protect the bulb and lamp housing from dirt, moisture, and road debris while restoring the correct early Porsche exterior lighting appearance.

Functions
• Replaces the front indicator / turn signal lens
• Suitable for SWB USA front indicator lamp assemblies
• Allows clear turn signal visibility
• Helps protect the lamp housing and bulb area
• Restores correct OE-style front lighting appearance
• Replaces cracked, faded, missing, or damaged original lenses
• OE Match replacement for classic Porsche lighting restoration.

Why Replace This Part?
Front indicator lenses can become cracked, faded, cloudy, scratched, brittle, or missing over time due to age, UV exposure, weathering, road debris, and minor impact damage. A damaged lens can reduce light visibility, allow moisture into the lamp housing, or leave the front of the vehicle looking incomplete. Replacing the lens helps restore correct lighting function and classic Porsche front-end detail.

When to Replace This Part
•  The original indicator lens is cracked, faded, cloudy, or broken
•  The lens is missing or no longer fits securely
•  Moisture or dirt is entering the indicator lamp housing
•  The front indicator light appears dull or incorrect
•  The lamp assembly has been removed or serviced
•  The vehicle has had front bodywork or paint repairs
•  The car is undergoing Porsche 911 or 912 SWB restoration.

Where it fits on the car
These lenses fit on the front indicator / turn signal lamp assemblies of short wheelbase Porsche 911 and 912 USA models. One lens is used for the left side and one for the right side, depending on the part selected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163140

The product you are viewing cross references to these numbers

Polished Metal Front Wiper Blade 
Sold each - 2 required per car

Maintain excellent visibility while preserving the period-correct appearance of your classic Porsche with this OE Match Polished Metal Front Wiper Blade (13"). Manufactured to OE specifications, this premium replacement combines a polished metal frame with a high-quality rubber wiping element to deliver reliable wiping performance and an authentic factory-style finish.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Designed as a direct replacement for the original component, this 13-inch front wiper blade provides smooth, even contact across the windscreen, effectively clearing rain, road spray and debris while complementing the classic styling of early Porsche models. Whether you're carrying out a concours restoration or replacing worn service items, this OE Match blade offers the quality, durability and appearance expected from a premium restoration component.

What Does the Wiper Blade Do?

The front wiper blade plays a vital role in maintaining safe driving visibility by keeping the windscreen clear in poor weather conditions.

Its primary functions include:

• Removing rainwater from the windscreen.
• Clearing road spray, dust and debris.
• Providing a clear field of vision during adverse weather.
• Reducing streaking and smearing.
• Maintaining even contact across the glass.
• Supporting safe and confident driving.

A high-quality wiper blade ensures consistent wiping performance while protecting the windscreen from unnecessary wear.

Why Replace the Wiper Blade?

Wiper blades naturally deteriorate over time due to continual exposure to sunlight, moisture, dirt and changing temperatures.

Common causes of wear include:

• Hardened or cracked rubber.
• Split wiping edge.
• Corrosion of the metal frame.
• Loss of wiping pressure.
• Damage caused by prolonged storage.
• Dirt and grit embedded in the rubber.
• General age-related deterioration.

Replacing worn blades restores efficient wiping performance and helps prevent scratches caused by damaged rubber.

Symptoms of a Worn Wiper Blade

Common signs that replacement is required include:

• Smearing across the windscreen.
• Streaks remaining after wiping.
• Chattering or skipping during operation.
• Squeaking noises. Uneven wiping pattern.
• Torn or hardened rubber.
• Reduced visibility in wet weather.
• Corrosion or damage to the blade frame.

Replacing the blade at the first signs of wear helps maintain optimum visibility and driving safety.

Benefits

• Restores clear wet-weather visibility.
• Improves wiping efficiency.
• Reduces streaking and smearing.
• Protects the windscreen from scratches caused by worn blades.
• Maintains the authentic appearance of your Porsche.
• Durable construction for long service life.
• Direct replacement installation.

Installation Recommendations

For the best wiping performance, inspect the complete windscreen wiping system during installation, including:

• Wiper arms.
• Wiper arm springs.
• Wiper spindle assemblies.
• Wiper linkage.
• Wiper motor.
• Washer jets.
• Washer hoses and reservoir.

Maintaining the complete system helps ensure smooth, reliable operation and consistent visibility throughout the year.

Why Choose OE Match Wiper Components?

OE Match wiper components are manufactured to deliver factory-quality fitment, dependable performance and long-lasting durability for classic Porsche models. Produced using quality materials and precision engineering, this polished metal 13-inch wiper blade restores reliable wiping performance while preserving the original appearance of your vehicle. It is an ideal replacement for concours restorations, regular maintenance and enthusiast-owned vehicles where originality and quality matter.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1698400500

The product you are viewing cross references to these numbers

Black Metal Wiper Blade – Front
Sold each - 2 required per car

Keep your classic Porsche performing safely in all weather conditions with this OE Match Black Metal Wiper Blade, manufactured to OE specifications for precise fitment, reliable wiping performance and an authentic factory-style appearance. Designed as a direct replacement for the original blade, it combines a durable black metal frame with a high-quality rubber wiping element to deliver smooth, streak-free operation while complementing the period-correct look of your vehicle.

Fits:

• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 914 (1970-1976)

Over time, wiper blades become worn through exposure to sunlight, temperature changes, dirt and regular use. Replacing ageing blades is one of the simplest and most effective ways to improve visibility, protect your windscreen and maintain the appearance of your Porsche.

Whether you're carrying out a concours restoration, refreshing exterior trim or replacing routine service items, this OE Match wiper blade provides dependable performance and long-lasting durability.

What Does the Wiper Blade Do?

The windshield wiper blade is responsible for maintaining a clear field of vision by removing water, dirt and road debris from the windscreen.

Its primary functions include:

• Clearing rainwater from the windscreen.
• Removing road spray, dust and debris.
• Maintaining maximum visibility during poor weather.
• Reducing streaking and smearing.
• Providing smooth, even wiping action.
• Helping improve driving safety.

A correctly functioning wiper blade is essential for maintaining visibility and ensuring the windscreen remains clear in changing driving conditions.

Why Replace the Wiper Blade?

Wiper blades are exposed to constant environmental conditions that gradually reduce their effectiveness.

Common causes of deterioration include:

• UV damage causing rubber hardening.
• Cracked or split wiping edge.
• General wear through repeated use.
• Dirt and grit damaging the rubber.
• Corrosion of the metal frame.
• Loss of wiping pressure.
• Long-term storage causing rubber deformation.

Replacing worn blades restores wiping efficiency and helps prevent scratches caused by hardened or damaged rubber.

Symptoms of a Worn Wiper Blade

Signs that replacement is required include:

• Streaking across the windscreen.
• Smearing during operation.
• Chattering or skipping.
• Squeaking noises.
• Uneven wiping pattern.
• Torn or hardened rubber.
• Poor visibility in wet weather.
• Corroded or damaged blade frame.

Replacing the blade at the first signs of wear helps maintain safe driving conditions and reduces unnecessary strain on the wiper system.

Benefits

• Restores excellent wet-weather visibility.
• Reduces smearing and streaking.
• Protects the windscreen from scratches.
• Maintains the authentic appearance of your Porsche.
• Smooth, reliable operation.
• Long-lasting construction.
• Direct replacement for the original component.

Installation Recommendations

For the best wiping performance, it is recommended to inspect the complete windscreen wiper system during installation, including:

• Wiper arms.
• Wiper arm springs.
• Wiper spindle assemblies.
• Wiper linkage.
• Wiper motor.
• Windscreen washer jets.
• Washer hoses and reservoir.

Servicing the complete system ensures reliable operation and optimum visibility throughout the year.

Why Choose OE Match Wiper Components?

OE Match wiper components are manufactured to deliver factory-quality fitment, dependable operation and long service life for classic Porsche models. Produced using durable materials and precision engineering, this black metal wiper blade offers reliable wiping performance while preserving the original appearance of your vehicle. It is an ideal replacement for routine servicing, restoration projects and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1698400400

The product you are viewing cross references to these numbers

Windshield Wiper Blade 
Sold each - 2 required per car

Maintain clear visibility and preserve the authentic appearance of your classic Porsche with this OE Match Windshield Wiper Blade, manufactured to OE specifications for a precise fit and dependable wiping performance. Designed as a direct replacement for the original component, this high-quality wiper blade ensures efficient removal of rain, road spray and dirt, helping you drive safely in all weather conditions.

Fits:

• Porsche 356A 1955-59
• Porsche 356B 1959-63

A properly functioning wiper blade is essential for maintaining visibility and protecting the windscreen from damage caused by hardened or deteriorated rubber. Whether you're completing a concours restoration, refreshing your exterior trim or carrying out routine maintenance, this OE Match replacement offers the quality, durability and factory-style appearance expected for a classic Porsche.

What Does the Windshield Wiper Blade Do?

The windshield wiper blade is responsible for maintaining a clear field of vision by sweeping water, dirt and debris from the windscreen.

Its primary functions include:

• Removing rainwater from the windscreen.
• Clearing road spray and grime.
• Improving visibility during poor weather.
• Reducing smearing and streaking.
• Helping maintain safe driving conditions.
• Providing smooth and consistent wiping performance.

A high-quality wiper blade ensures maximum contact with the windscreen for efficient cleaning without damaging the glass.

Why Replace the Windshield Wiper Blade?

Wiper blades are service items that naturally wear with age and regular use.

Common causes of deterioration include:

• UV exposure causing rubber to harden.
• Cracked or split wiping edge.
• Loss of flexibility. Wear from repeated use.
• Dirt and debris damaging the rubber.
• Corrosion of the supporting frame.
• Long periods of vehicle storage.

Replacing worn blades restores clear visibility and helps prevent scratches to the windscreen caused by damaged rubber.

Symptoms of a Worn Wiper Blade

Signs that replacement is required include:

• Smearing across the windscreen.
• Streaks remaining after wiping.
• Chattering or skipping during operation.
• Squeaking noises.
• Uneven wiping performance.
• Torn or cracked rubber.
• Reduced visibility in wet weather.
• Corrosion or damage to the blade frame.

Replacing the blade at the first signs of wear helps maintain optimum visibility and driving safety.

Benefits

• Restores clear windscreen visibility.
• Improves driving safety in wet weather.
• Reduces streaking and smearing.
• Protects the windscreen from damage caused by worn blades.
• Smooth and quiet wiping action.
• Long-lasting construction.
• Direct replacement for the original blade.

Installation Recommendations

For the best results, inspect the complete windscreen wiping system when replacing the blade, including:

• Wiper arms.
• Wiper arm springs.
• Wiper spindle assemblies.
• Wiper linkage.
• Wiper motor.
• Windscreen washer jets.
• Washer hoses and reservoir.

Maintaining the complete wiping system ensures reliable operation and maximum visibility.

Why Choose OE Match Wiper Components?

OE Match wiper components are manufactured to provide factory-quality fitment, reliable operation and long-lasting durability for classic Porsche models. Produced using quality materials and precision manufacturing techniques, this windshield wiper blade delivers excellent wiping performance while maintaining the original appearance of your vehicle. It is an ideal replacement for restorations, routine servicing and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64462831110

The product you are viewing cross references to these numbers

Handbrake Cable – fits Left or Right Hand Side
Sold each - 2 required per car

Restore dependable parking brake performance with this OE Match Handbrake Cable. Manufactured to OE specifications for accurate fitment and reliable operation. This high-quality replacement cable is designed to transmit the force from the handbrake lever to the rear brake assemblies, ensuring the parking brake engages smoothly and securely whenever required.

Fits

• Porsche 911 1965-1968 2.0L / 912 SWB (F)  

Diagram ref no 45

As one of the key mechanical components of the parking brake system, the handbrake cable is subjected to constant movement, tension and exposure to road dirt, moisture and corrosion. Over time, the inner cable and outer casing can wear or seize, reducing braking efficiency and making adjustment increasingly difficult.

Whether you're restoring a classic Porsche or replacing a worn original cable as part of routine maintenance, this OE Match component provides dependable operation and long service life.

What Does the Handbrake Cable Do?

The handbrake cable forms the mechanical link between the handbrake lever and the rear braking system.

Its primary functions are to:

• Transfer force from the handbrake lever to the rear brakes.
• Securely hold the vehicle when parked.
• Provide emergency braking capability should the primary braking system fail.
• Deliver smooth and progressive handbrake operation.
• Maintain consistent parking brake performance.

A correctly functioning cable is essential for safe parking and proper adjustment of the handbrake system.

Why Replace the Handbrake Cable?

Over many years of use, handbrake cables naturally deteriorate due to exposure to the elements and constant mechanical movement.

Common causes of failure include:

• Internal corrosion.
• Frayed or stretched cable strands.
• Seized inner cable.
• Damaged outer sheath.
• Water ingress.
• Road salt contamination.
• Excessive wear at mounting points.
• Age-related deterioration.

Replacing a worn cable restores smooth operation and ensures the parking brake functions as intended.

Symptoms of a Worn Handbrake Cable

Signs that the cable may require replacement include:

• Excessive handbrake lever travel.
• Handbrake failing to hold the vehicle securely.
• Stiff or heavy handbrake operation.
• Uneven braking between the rear wheels.
• Difficulty adjusting the handbrake.
• Cable sticking or failing to release fully.
• Visible corrosion or damage to the cable casing.
• MOT or inspection failure due to reduced parking brake performance.

Replacing the cable before complete failure helps maintain vehicle safety and prevents further wear to the braking system.

Benefits

• Restores effective parking brake operation.
• Provides smooth handbrake engagement.
• Improves handbrake adjustment.
• Helps maintain vehicle safety.
• Replaces seized or stretched original cables.
• Long-lasting, durable construction.
• Straightforward installation.

Installation Recommendations

When replacing the handbrake cable, it is good practice to inspect the complete parking brake system, including:

• Handbrake shoes.
• Brake brake discs with integrated handbrake assemblies (where applicable).
• Return springs.
• Adjusters.
• Equaliser mechanism.
• Guide tubes.
• Mounting hardware.

Replacing worn components together helps ensure even braking performance and simplifies adjustment.

Why Choose OE Match Brake Components?

OE Match brake components are manufactured to deliver factory-quality fitment, dependable operation and long service life for classic Porsche models. Produced using durable materials and precision manufacturing processes, this handbrake cable restores smooth, reliable parking brake performance while maintaining the originality of your braking system. It is an ideal choice for restoration projects, routine servicing and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142455116

The product you are viewing cross references to these numbers

Vent Line Muffler (Silencer) for Auxiliary Heating 

Maintain the correct operation and refinement of your classic Porsche heating system with this OE Match Vent Line Muffler (Silencer) for the auxiliary heating system. Designed to replace the original component fitted to early air-cooled Porsche 911 models, this precision-manufactured part helps reduce airflow noise within the heater ventilation circuit while ensuring efficient operation of the auxiliary heating system.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC

Diagram ref no 40

Manufactured to OE specifications, this vent line muffler provides accurate fitment and dependable performance, making it an ideal choice during restoration, heater system refurbishment or preventative maintenance. As many original components have now become brittle, corroded or damaged after decades of service, replacing this often-overlooked part helps restore the smooth and quiet operation of the heating and ventilation system.

Whether you're carrying out a concours restoration or simply refreshing your Porsche's heating system, this OE Match component delivers the quality and fit expected for classic air-cooled models.

What Does the Auxiliary Heating Vent Line Muffler Do?

The vent line muffler forms part of the auxiliary heating and ventilation system.

Its purpose is to:

• Reduce airflow and induction noise within the heating system.
• Smooth airflow through the vent line.
• Help maintain efficient heater operation.
• Reduce unwanted resonance from the ventilation circuit.
• Contribute to a quieter and more refined cabin environment.
• Support the correct functioning of the auxiliary heating system.

Although compact, this component plays an important role in maintaining the original characteristics of the Porsche heating system.

Why Replace the Vent Line Muffler?

Years of exposure to heat, moisture, vibration and engine bay contaminants can cause the original vent line muffler to deteriorate.

Common reasons for replacement include:

• Corrosion.
• Internal deterioration.
• Physical damage.
• Blockages restricting airflow.
• Age-related wear.
• Heater system refurbishment.
• Restoration projects.
• Missing original components.

Replacing worn heating components helps restore correct airflow while maintaining the efficiency and refinement of the ventilation system.

Symptoms of a Worn or Damaged Vent Line Muffler

Signs that the component may require replacement include:

• Increased airflow or induction noise from the heating system.
• Reduced heater efficiency.
• Restricted airflow.
• Rattling or vibration within the vent line.
• Visible corrosion or damage.
• Missing heater system components.
• Poor overall heating system performance.

Replacing the vent line muffler helps restore proper airflow characteristics and contributes to quieter heater operation.

Benefits

• Restores quieter heater operation.
• Helps maintain correct airflow.
• Supports efficient auxiliary heating performance.
• Replaces worn or corroded original components.
• Improves overall refinement.
• Easy direct-fit installation.
• Long-lasting durability.

Why Choose OE Match Heating Components?

OE Match heating and ventilation components are manufactured to provide factory-quality fitment, dependable performance and long service life for classic Porsche models. Designed using high-quality materials and precision manufacturing processes, this vent line muffler restores the original operation of the auxiliary heating system while preserving the authentic character of your air-cooled Porsche. It is an excellent choice for restoration specialists and enthusiasts looking to maintain both comfort and originality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90157206130

The product you are viewing cross references to these numbers

Rear Door Handle Gasket 
Sold each - 2 required per car

Restore the fit, finish and weather sealing of your classic Porsche with this OE Match Rear Door Handle Gasket. Manufactured to OE specifications, this gasket provides a precise seal between the rear door handle and the bodywork, helping to prevent moisture ingress while protecting the paintwork from damage caused by metal-to-body contact.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)

Diagram ref no 22

Over time, original rubber gaskets harden, shrink and crack due to exposure to sunlight, moisture and changing temperatures. Replacing worn or deteriorated seals during restoration or routine maintenance helps preserve the appearance of your Porsche while ensuring the door handle is correctly seated against the body.

Whether you're undertaking a concours restoration or simply refreshing tired exterior trim, this OE Match gasket provides the quality and fitment expected for an authentic installation.

What Does the Rear Door Handle Gasket Do?

Although small, the door handle gasket performs several important functions:

• Creates a weather-resistant seal between the handle and body.
• Helps prevent rainwater and moisture entering behind the handle.
• Protects painted surfaces from scratches and wear.
• Reduces dirt and debris collecting around the mounting area.
• Provides a neat, factory-style finish.
• Helps maintain correct handle alignment.

Replacing ageing gaskets is an inexpensive way to improve both the appearance and longevity of your classic Porsche.

Why Replace the Door Handle Gasket?

Rubber seals naturally deteriorate over decades of use and environmental exposure.

Common signs of wear include:

• Hardened or brittle rubber.
• Cracked or split gasket material.
• Flattened sealing surface.
• Water ingress around the handle.
• Dirt accumulation beneath the handle.
• Paint damage caused by direct metal contact.
• Perished or missing seals during restoration.

Installing a new gasket restores effective sealing while enhancing the overall finish of the vehicle.

Benefits

• Restores correct sealing.
• Protects surrounding paintwork.
• Improves exterior appearance.
• Helps prevent corrosion caused by trapped moisture.
• Provides secure and accurate handle fitment.
• Long-lasting rubber construction.
• Easy direct replacement.
  
  

For the best results during restoration, it is recommended to inspect the door handles, mounting hardware, door seals and associated trim components, replacing any worn or damaged items at the same time.

Why Choose OE Match Rubber Seals?

OE Match rubber components are manufactured to provide factory-quality fitment, dependable sealing performance and excellent durability for classic Porsche models. Produced using high-quality materials, this rear door handle gasket delivers reliable weather protection while maintaining the authentic appearance of your Porsche. It is the ideal replacement for ageing original seals during restoration or preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153163220

The product you are viewing cross references to these numbers

Front Automatic / Inertia Seat Belt Pair – Vertical B-Pillar Mount / Floor Buckles with L Bracket 
Sold as a pair with hardware

Restore the safety, functionality and appearance of your classic Porsche with this OE Front Automatic / Inertia Seat Belt Pair, designed for Porsche 911 models from 1969 to 1985. Featuring vertical B-pillar mounted inertia reels and floor-mounted buckles with L brackets, this complete pair offers dependable occupant restraint while maintaining an authentic factory-style appearance.

Fits:

• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

Manufactured to OE specifications, these automatic inertia seat belts provide smooth extension and retraction, allowing unrestricted movement during normal driving while locking instantly under sudden braking or impact. Ideal for restorations, refurbishment projects or replacing worn original belts, this kit delivers reliable performance with straightforward installation.

Buckle Dimensions

Overall buckle length: Approximately 27cm
Centre of mounting eye to end of buckle:Approximately 25cm

These dimensions ensure correct seating position and comfortable buckle access for compatible Porsche 911 models.

What Do Inertia Seat Belts Do?

Automatic inertia seat belts are designed to:

• Secure the driver and passenger safely in their seats.
• Allow comfortable movement during normal driving.
• Lock instantly during rapid deceleration or collision.
• Reduce the risk of injury in an accident.
• Meet the safety requirements of later classic Porsche models.

The inertia reel automatically adjusts belt tension while keeping the webbing neatly retracted when not in use.

Why Replace Your Seat Belts?

Seat belts are critical safety components that deteriorate over time, even if they appear serviceable.

Common reasons for replacement include:

• Frayed or damaged webbing.
• Slow or incomplete belt retraction.
• Faulty inertia locking mechanism.
• Corroded mounting hardware.
• Worn or damaged buckles.
• UV fading and age-related weakening.
• Restoration of worn interiors.
• Safety improvements for regularly driven classic vehicles.

Replacing ageing seat belts helps ensure your Porsche retains the highest possible level of occupant protection.

Benefits

• Restores original seat belt functionality.
• Improves occupant safety.
• Smooth and reliable belt operation.
• Factory-style appearance.
• Direct replacement for worn seat belts.
• High-quality construction for long service life.
• Complements classic Porsche interior restorations.

Configuration

• Front seat belts.
• Automatic inertia reels.
• Vertical B-pillar mounting.
• Floor buckles with L brackets.
• Supplied as a pair.

Please check your existing mounting configuration before ordering to ensure compatibility.

When Should Seat Belts Be Replaced?

Seat belts should be replaced if they:

• Have been involved in an accident.
• Show signs of fraying or cuts.
• Retract slowly or fail to retract fully.
• Do not lock correctly during testing.
• Have damaged buckles or mounting brackets.
• Show excessive wear from age or prolonged UV exposure.

Even well-maintained classic vehicles can benefit from replacing original seat belts as part of a comprehensive safety restoration.

Why Choose OE Seat Belts?

OE seat belts are manufactured to deliver dependable safety, precise fitment and long-lasting durability for classic Porsche models. Designed to match the original mounting configuration and operation, they provide the confidence of modern restraint performance while preserving the authentic character of your vehicle. Whether restoring a concours-quality Porsche or maintaining a regularly driven classic, these seat belts offer an ideal balance of safety, quality and originality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92880312609

The product you are viewing cross references to these numbers

Knob With Hole For Insert Coloured Pin, Black.
Button for fog lights & auxiliary heater
The OE Match Knob with Hole for Coloured Insert Pin, Black is a premium-quality replacement interior trim component designed for compatible classic Porsche models. Manufactured to OE specifications for fit, finish and durability, this precision-moulded black knob features the correct centre hole to accept the original-style coloured insert pin, allowing the restoration of both the appearance and functionality of the factory interior controls.  

Fits:

This knob is NOT painted but made out of full colour material. CNC machined and full polished. Made to Porsche Specs.

Diagram Ref No 14

Manufactured from high-quality automotive-grade plastic, the knob is engineered to withstand regular use, UV exposure and temperature fluctuations without cracking, fading or becoming brittle. Precision-produced to the original Porsche dimensions, it provides direct OE-style fitment, making it ideal for restoration projects, interior refurbishment or replacing worn, damaged or missing original knobs.

What This Product Does:

• Provides a replacement control knob for the vehicle interior.
• Accepts the original-style coloured insert pin.
• Restores the original appearance of the dashboard or interior controls.
• Provides a comfortable and secure grip during operation.
• Matches the factory-style black interior finish.
• Helps maintain the authenticity of restoration projects.
• Replaces worn, damaged or missing control knobs.
• Forms an essential part of the interior control assembly.

Symptoms Of Wear Or Failure:

• Cracked or broken knob.
• Missing coloured insert pin.
• Loose fit on the control shaft.
• Difficulty operating the associated control.
• Faded, scratched or worn surface finish.
• Brittle or deteriorated plastic.
• Knob rotating independently of the control mechanism.
• Missing knob exposing the control shaft.
• Poor interior appearance.
• Visible signs of ageing or UV damage.
  
  

Why Replacement Matters:

• Interior control knobs are handled frequently and are continually exposed to sunlight, temperature changes and everyday wear. Over time, the plastic can become brittle, crack or lose its original finish, while repeated use may cause the knob to loosen or become damaged.
• A worn or missing knob can make operating the associated control more difficult and detract from the appearance of the vehicle's interior. During restoration work, replacing aged or damaged knobs is an important finishing detail that helps preserve the original character and functionality of the cabin.
• Replacing the original component with the OE Match Knob with Hole for Coloured Insert Pin restores the correct appearance, secure fit and smooth operation of the interior control. Manufactured to OE standards using high-quality materials, it provides factory-style fitment, excellent durability and dependable long-term performance, making it an ideal choice for maintaining or restoring your classic Porsche interior.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155282121

The product you are viewing cross references to these numbers

Knob For The Pop Out Quarter Window.

The OE Match Pop-Out Quarter Window Knob is a premium-quality replacement interior trim component designed for the opening rear quarter windows fitted to compatible classic Porsche models. Available in Beige, Black, Grey and Ivory finishes, this precision-manufactured knob restores the original appearance and functionality of the pop-out quarter window latch, providing a comfortable grip for opening, closing and securing the window.  

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 356 1950-55
• Porsche 356A 1955-59
• Porsche 356B 1959-63
• Porsche 356C 1963-65  

This knob is NOT painted but made out of full colour material. CNC machined and full polished. Made to Porsche Specs. with the brass M5 insert with locking screw.

Diameter of the knob is 22.5 mm

Available in the 4 original colours: Black, Beige, Ivory and Grey.

Diagram Ref No 16

Manufactured from durable automotive-grade materials, the knob is engineered to withstand frequent use, UV exposure and temperature fluctuations without cracking, fading or becoming brittle. Precision-produced to OE dimensions, it provides direct OE-style fitment, making it ideal for restoration projects, interior refurbishment or replacing worn, damaged or missing original window knobs.  

What This Product Does:

• Provides a secure grip for operating the pop-out quarter window.
• Allows the window to be opened and closed smoothly.
• Helps secure the window in the closed position.
• Restores the original appearance of the interior.
• Improves ease of operation of the window latch.
• Matches the factory interior colour depending on the selected finish.
• Replaces worn, damaged or missing quarter window knobs.
• Forms an essential part of the rear quarter window latch assembly.

Symptoms Of Wear Or Failure:

• Cracked or broken knob.
• Loose fit on the window latch mechanism.
• Difficulty opening or closing the quarter window.
• Poor grip when operating the latch.
• Faded, scratched or discoloured finish.
• Missing knob exposing the latch mechanism.
• Wobbling or rotating on the spindle.
• Reduced ability to securely operate the window.
• Interior appearance becoming worn or incomplete.
• Visible deterioration due to age or UV exposure.

Why Replacement Matters:

• The pop-out quarter window knob is handled regularly and is continually exposed to sunlight, temperature changes and general wear. Over time, the material can become brittle, crack or fade, while repeated use may cause the knob to loosen or break, affecting both appearance and ease of operation.
• A damaged or missing knob can make opening and securing the quarter window awkward, while also detracting from the original look of the vehicle's interior. During restoration projects, replacing worn interior hardware is an important finishing detail that helps return the cabin to its factory appearance.
• Replacing the original component with the OE Match Pop-Out Quarter Window Knob restores smooth operation, a secure grip and an authentic factory-style appearance. Manufactured to OE standards using high-quality materials, it provides excellent durability, precise fitment and long-lasting performance, making it an ideal choice for maintaining or restoring your classic Porsche interior.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64455282003

The product you are viewing cross references to these numbers