OE 匹配

Side Sill Rubber / Rocker Panel Seal set
This OE Match side sill rubber set is a direct replacement for Porsche part number 93055910301, manufactured to original specifications for precise fitment and long-lasting durability. Supplied as a set of two, it provides a complete solution for both sides of the vehicle.

Fits:
Porsche 911 / 930 1974 - 1989

Diagram ref. no 8

These side sill rubbers seal the rocker panel area on both sides of the vehicle, preventing contaminants from entering body seams while enhancing the overall exterior finish.

By replacing both sides together, the vehicle maintains a consistent appearance and proper protection across the full length of the sills.

Function
•  Seals and protects both side sill / rocker panel areas
•  Prevents ingress of dirt, moisture, and debris
•  Enhances exterior appearance and uniformity
•  Protects bodywork from wear and corrosion

Over time, sill rubbers can crack, shrink, or deteriorate due to age and exposure. Worn seals can allow moisture and debris to accumulate, increasing the risk of corrosion and affecting the vehicle’s appearance.

Replacing both sides together ensures proper sealing, protects the bodywork, and restores the original factory look - especially important for classic Porsche restoration.

When to replace
• Cracked, hardened, or perished rubber
• Loose or missing trim along the sill
• Visible gaps allowing dirt or water ingress
• During restoration or repainting
• Faded or deteriorated exterior trim

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93055910301

您正在查看的产品与这些编号存在交叉引用关系

Rear Stabilizer Bar Drop Link & Bush Kit, Size: 24.10mm
The OE Match Rear Stabilizer Bar Kit is a complete suspension refresh package for Porsche Cayenne models. It includes rear drop links (left & right), stabilizer bar bushes, clamps, and genuine Porsche mounting hardware for a full rear anti-roll bar overhaul.

Fits:
Porsche 955 Cayenne S 4.5L 2003 - 2006
  * with Standard Suspension (PR:1BA)
Porsche 955 Cayenne 3.2L 2004 - 2006
  * with Air suspension with levelling system and height adjustment (PASM) (PR:1BK)

Porsche 957 Cayenne 4.8L 2007 - 2010
  * with Standard suspension (PR:1BA), Comfort suspension (steel springs) (PR:1BW)
Porsche 957 Cayenne 3.6L / 3.0L Diesel 2007 - 2010
  * with Air suspension with levelling system and height adjustment (PASM) (PR:1BK)

Porsche 958.1 Cayenne 2011 - 2014
  * with Anti-roll bar, front and rear (PR:0AB)
  * with Anti-roll bar, active body control (PDDC) - (PR:0AC)

Porsche 958.2 Cayenne 3.6L V8 2014 - 2018
Porsche 958.2 Cayenne 4.8L V8 Turbo 2014 - 2018
Porsche 958.2 Cayenne 4.2L Diesel 2014 - 2018
  * with Anti-roll bar, front and rear (PR:0AB)
  * with Anti-roll bar, active body control (PDDC) - (PR:0AC)

Please go by size of the bar 24.10mm and colour markings GREEN

Diagram ref no 2, 3, 4, 5, 6 and 7.

This comprehensive kit is designed to restore the full function of the rear anti-roll bar (ARB) system.

Kit includes:
  •  4 × OE Match stabilizer bar bush halves (95533379240)
  •  4 × Genuine Porsche bolts (N10697801)
  •  2 × Genuine Porsche clamps (95533377701)
  •  1 × OE Match rear drop link (left) (95533306921)
  •  1 × OE Match rear drop link (right) (95533307021)

The bushes are designed for 24.10mm rear stabilizer bars, providing a cushioned and secure mounting point. The included clamps and bolts ensure proper installation and long-term reliability.

The drop links connect the stabilizer bar to the suspension arms, allowing the bar to transfer forces between wheels and reduce body roll. Manufactured to OE specifications, they provide precise fitment and durability under load.

This all-in-one kit eliminates the need to source individual components, making it ideal for both maintenance and suspension overhaul.

This kit restores the function of the rear stabilizer system by securing the anti-roll bar and reconnecting it to the suspension via new drop links. It ensures proper load transfer between wheels, reducing body roll and improving vehicle stability. Replacing all components together eliminates play, noise, and worn joints - resulting in smoother and more controlled handling.

Function
•  Connects stabilizer bar to suspension (via drop links)
•  Secures stabilizer bar to chassis (via bushes & clamps)
•  Reduces body roll during cornering
•  Improves handling stability and driving control
•  Minimises suspension noise and vibration

Over time, drop links can develop play in their joints, while bushes can wear, crack, or harden. This leads to knocking noises, reduced handling precision, and increased body roll. Replacing the complete system - including bushes, clamps, bolts, and drop links - restores suspension integrity, improves stability, and eliminates unwanted noise.

When to replace
•  Knocking or rattling from rear suspension
•  Excessive body roll in corners
•  Worn or loose drop link joints
•  Cracked or deteriorated bushes
•  During suspension overhaul or maintenance

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95533379240

您正在查看的产品与这些编号存在交叉引用关系

Rear stabilizer bar bush set with bolts and clamps, Size: 24.10mm
The OE Match Rear Stabilizer Bar Bush Kit with bolts and clamps is a complete rear anti-roll bar mounting solution for Porsche Cayenne models. It includes four OE Match bush halves, along with genuine Porsche bolts and mounting clamps for a full and secure installation.
SET OF 4 halves, with bolts and clamps.

Fits:
Porsche 955 Cayenne S 4.5L 2003 - 2006
  * with Standard Suspension (PR:1BA)
Porsche 955 Cayenne 3.2L 2004 - 2006
  * with Air suspension with levelling system and height adjustment (PASM) (PR:1BK)

Porsche 957 Cayenne 4.8L 2007 - 2010
  * with Standard suspension (PR:1BA), Comfort suspension (steel springs) (PR:1BW)
Porsche 957 Cayenne 3.6L / 3.0L Diesel 2007 - 2010
  * with Air suspension with levelling system and height adjustment (PASM) (PR:1BK)

Porsche 958.1 Cayenne 2011 - 2014
  * with Anti-roll bar, front and rear (PR:0AB)
  * with Anti-roll bar, active body control (PDDC) - (PR:0AC)

Porsche 958.2 Cayenne 3.6L V8 2014 - 2018
Porsche 958.2 Cayenne 4.8L V8 Turbo 2014 - 2018
Porsche 958.2 Cayenne 4.2L Diesel 2014 - 2018
  * with Anti-roll bar, front and rear (PR:0AB)
  * with Anti-roll bar, active body control (PDDC) - (PR:0AC)

Please go by size of the bar 24.10mm and colour markings GREEN

Diagram ref no 2, 3 and 4.

This comprehensive kit is designed to fully refresh the rear stabilizer (anti-roll) bar mounting system.

Kit includes:
  • 4 × OE Match stabilizer bar bush halves (95533379240)
 •  4 × Genuine Porsche Hex collared bolt M10X30 (N10697801)
 •  2 × Genuine Porsche stabilizer bar clamps (95533377701)

The bush halves are manufactured to OE specifications and designed to fit 24.10mm rear anti-roll bars, ensuring precise fitment and long-lasting durability. These bushes provide a cushioned interface between the stabilizer bar and chassis, allowing controlled movement while reducing vibration.

This kit secures the rear stabilizer bar to the chassis, allowing it to function effectively in reducing body roll during cornering. It ensures smooth, controlled movement of the anti-roll bar while minimising noise and vibration.

Replacing bushes, clamps, and bolts together restores suspension performance and eliminates common causes of knocking or looseness.

Function
•  Supports and secures the rear anti-roll bar
•  Allows controlled movement during suspension travel
•  Reduces body roll and improves handling stability
•  Minimises noise, vibration, and harshness
•  Ensures proper mounting with OE-spec hardware

Over time, stabilizer bar bushes can degrade, harden, or crack, while clamps may corrode and bolts lose clamping strength. This can result in knocking noises, reduced handling precision, and excessive body roll. Replacing the full set - including bushes, clamps, and bolts - ensures a secure and stable installation, restoring proper suspension performance and eliminating unwanted noise.

When to replace
•   Knocking or squeaking from rear suspension
•   Excessive body roll in corners
•   Visible wear or cracking of bushes
•   Loose or misaligned stabilizer bar
•   During suspension service or overhaul

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95533379240

您正在查看的产品与这些编号存在交叉引用关系

后稳定杆衬套套装（含螺栓），尺寸：24.10毫米
OE Match 后稳定杆衬套套件是保时捷 Cayenne 车型后防倾杆安装系统的完整替换套件。它包含四个 OE Match 衬套半片 (95533379240) 以及四个用于牢固安装的保时捷原厂螺栓 (N10697801)。
一套4个半片，带螺栓。

适用：
保时捷 955 Cayenne S 4.5L 2003 - 2006
* 带标准悬架（PR:1BA）
保时捷 955 Cayenne 3.2L 2004 - 2006
* 带空气悬架、水平调节系统和高度调节功能 (PASM) (PR:1BK)

保时捷 957 卡宴 4.8L 2007 - 2010
* 配备标准悬架（PR:1BA）、舒适悬架（钢弹簧）（PR:1BW）
保时捷 957 Cayenne 3.6L / 3.0L 柴油版 2007 - 2010
* 带空气悬架、水平调节系统和高度调节功能 (PASM) (PR:1BK)

保时捷 958.1 卡宴 2011 - 2014
* 前后均配备防倾杆 (PR:0AB)
* 带防侧倾杆、主动车身控制系统 (PDDC) - (PR:0AC)

保时捷 958.2 卡宴 3.6L V8 2014 - 2018
保时捷 958.2 Cayenne 4.8L V8 涡轮增压 2014 - 2018
保时捷 958.2 Cayenne 4.2L 柴油版 2014 - 2018
* 前后均配备防倾杆 (PR:0AB)
* 带防侧倾杆、主动车身控制系统 (PDDC) - (PR:0AC)

请以杆身尺寸 24.10 毫米和绿色标记为准。

图示编号 2

该套件旨在全面翻新后稳定杆（防倾杆）安装系统。

套件包含：
• 4 × OE 匹配稳定杆衬套半片 (95533379240)
• 4 个保时捷原装螺栓 (N10697801)

这些衬套按照原厂规格制造，专为 24.10 毫米后防倾杆设计，确保精准安装和可靠性能。每个衬套半片都是完整安装组件的一部分，两者协同工作，在牢固固定稳定杆的同时，允许其进行可控运动。

这些衬套采用优质橡胶复合材料制成，能够承受悬架的持续运动、路面应力以及环境侵蚀，经久耐用。配备原厂保时捷螺栓可确保合适的夹紧力和牢固的安装，避免因重复使用磨损或腐蚀的固定件而造成的风险。

该套件将后稳定杆固定到底盘上，使其能够有效减少车辆转弯时的车身侧倾。它确保防倾杆平稳、可控地运动，同时最大限度地降低噪音和振动。

同时更换衬套和螺栓可以恢复悬架稳定性并改善整体操控性。

功能
•支撑并固定后防倾杆
•允许在悬架行程中进行可控运动
•减少车身侧倾，提高操控稳定性
•最大程度减少噪音、振动和不平顺性
•确保使用原厂规格硬件正确安装

随着时间的推移，稳定杆衬套会磨损、硬化或开裂，导致异响、操控精度下降和车身侧倾加剧。老化的螺栓也可能失去夹紧力或发生腐蚀。更换整套衬套和原厂螺栓可以恢复悬架的正常功能，提高车辆稳定性，并消除异响。

何时更换
•后悬架发出敲击声或吱吱声
•过弯时车身侧倾过大
•灌木丛出现明显的磨损或裂纹
•稳定杆松动或错位
•在悬架维修或大修期间

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95533379240

您正在查看的产品与这些编号存在交叉引用关系

凸轮轴链轮套件。

这款原厂配套凸轮轴链轮套件包含经典保时捷发动机凸轮轴正时驱动系统所需的关键部件。该套件通常包含凸轮轴链轮以及必要的安装硬件，以确保其牢固安装并与正时链条组件精确对准。

套装内容：
x2 凸轮轴链轮法兰（90110558302/1）
x2 凸轮轴链轮 (90110554604/1)
x2 凸轮轴链轮直销 (90024300100)
x2 伍德拉夫钥匙 (N0127082)

适用：

• 保时捷 911 1965-1968 2.0L / 912 SWB (F)
• 保时捷 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (女)
• 保时捷 911 1974-1977 2.7L / 1976-77 3.0 卡雷拉
• 保时捷 911 1978-1983 3.0L / SC
• 保时捷 911 1984-1986 3.2升
• 保时捷 911 1987-1989 3.2L G50
• 保时捷 911 1975-1977 3.0L 涡轮 (930)
• 保时捷 911 1978-1989 3.3L 涡轮增压 (930)
• 保时捷 964 (911) C2 1989-93
• 保时捷 964 (911) C4 1989-93
• 保时捷 964 (911) RS 3.6L 1991-93
• 保时捷 964 (911) RS 3.8L 1991-93
• 保时捷 964 (911) 涡轮 3.3L 1991-93
• 保时捷 964 (911) 涡轮 3.6L 1991-93
• 保时捷 993 (911) C2 1994-97
• 保时捷 993 (911) C4 1994-97
• 保时捷 993 (911) RS 1994-97
• 保时捷 993 (911) C2S 1994-97
• 保时捷 993 (911) C4S 1994-97
• 保时捷 993 (911) 涡轮 1994-96
• 保时捷 993 (911) GT2 1994-97
• 保时捷 993 (911) TURBO S 1994-97
• 保时捷 914（1970-1976）

图示编号 7、8、9、12

本产品的功能：

• 通过正时链条驱动凸轮轴
• 同步凸轮轴和曲轴旋转
• 确保阀门正确开启和关闭的时间
• 保持发动机性能和效率

磨损或故障症状：

• 正时链条区域发出咔嗒声
• 发动机正时异常
• 发动机性能下降或动力损失
• 发动机调校过程中难以保持正确的正时
• 链轮齿部有明显的磨损或损坏

为什么更换很重要：

• 确保凸轮轴正时和发动机同步的精确性
• 防止正时链条打滑或错位
• 提高发动机性能和效率
• 减少正时链条及相关部件的磨损
• 对于安全可靠的发动机大修至关重要

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SPROCKETKIT911

您正在查看的产品与这些编号存在交叉引用关系

变速杆连接套件。

这款原厂配套的换挡连杆套件包含换挡机构中使用的关键部件，旨在恢复经典保时捷车型精准可靠的换挡性能。该套件通常包含一个 Powerflex 换挡杆连接衬套以及连接换挡杆和变速箱的相关连杆部件。

套装内容：
x1 换挡杆联轴器衬套，POWERFLEX (PFR57-430)
x1 变速杆尼龙球头（91142413901/1）
x1 变速杆导轨 (90142413202/1)
x1 换挡摩擦环 (91442422400/1)

适用：

• 保时捷 911 1970-1972 2.2L / 2.4L / 2.7L RS LWB (女)
• 保时捷 914（1970-1976）

图示编号 9、11、22

本产品的功能：

• 通过换挡杆将换挡杆连接到变速器。
• 将驾驶员的操作转化为精确的换挡
• 减少联动系统中的间隙和运动
• 提高换挡准确性和响应速度

磨损或故障症状：

• 换挡感觉松散或模糊
• 换挡困难
• 变速杆间隙过大
• 齿轮啮合不准或啮合不精确
• 变速杆振动加剧

为什么更换很重要：

• 恢复精确的档位选择
• 消除变速杆的间隙和松动
• 提升整体驾驶感受和参与度
• 采用升级材料（聚氨酯）增强耐用性
• 防止传动部件进一步磨损

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

GEARSHIFTKIT911

您正在查看的产品与这些编号存在交叉引用关系

前置散热器中冷器和管路套件
这款原厂配套的增压空气冷却器及管路套件是保时捷 Cayenne Turbo 车型的完整进气冷却解决方案。它包含左右两侧的原厂配套中冷器，以及原装保时捷中冷器管路和软管卡箍，可实现整套系统的更换。

适用：
保时捷 957 Cayenne Turbo 4.8L V8 2007 - 2010
保时捷 958 Cayenne Turbo 4.8L V8 2011 - 2018

图示编号 1、2、11、12、15。

这套综合套件旨在恢复涡轮增压进气冷却系统的效率和可靠性。

套件包含：
1 × OE 匹配型中冷器（左）– 95511063901
1 × OE 匹配中冷器（右）– 95511064001
1 × 原装保时捷中冷器管（左侧）– 95511062301
1 × 原装保时捷中冷器管（右侧）– 95511062410
2 个原装保时捷软管卡箍 – N10619801

中冷器（增压空气冷却器）按照原厂规格制造，确保最佳散热效果和精准安装。它们位于车辆前部，用于冷却来自涡轮增压器的压缩空气，然后再将其送入发动机。

随附的保时捷原厂管道和卡箍可确保良好的密封性、适配性和耐用性——这对保持增压压力和防止泄漏至关重要。

该套件可冷却来自涡轮增压器的压缩进气，从而提高空气密度并改善燃烧效率。通过降低进气温度，它可以提升发动机性能、动力输出和可靠性。

更换两个中冷器和相关管道可确保系统完全密封，防止增压泄漏并恢复最佳涡轮性能。

功能
•降低涡轮增压器的进气温度
•提高发动机效率和功率输出
•保持稳定的增压压力
•采用原装管道，确保无泄漏气流

该系统对于保持保时捷涡轮增压发动机的性能至关重要。

随着时间的推移，中冷器可能会堵塞、腐蚀或出现内部泄漏，从而降低冷却效率。管道和卡箍也可能磨损或松动，导致增压泄漏和性能下降。更换整个系统可以确保适当的冷却，恢复损失的动力，并防止因进气温度过高或压力损失而导致的发动机负荷过重。

何时更换
•动力损失或涡轮增压性能下降
•加速过程中出现增压泄漏或嘶嘶声
•中冷器内部的油污
•中冷器出现可见的损坏或腐蚀
•与增压压力或进气温度相关的故障代码

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

INTERCOOLERKIT.957T

您正在查看的产品与这些编号存在交叉引用关系

Engine mount kit
The OE Match Engine Mount Kit is a complete replacement solution for Porsche 996 Turbo models. It includes two OE Match engine mounts along with genuine Porsche bolts, washers, and locknuts for a secure and correct installation.
SET OF 2,  with bolts, washers and nuts

Fits:
Porsche 996 (911) Turbo 2000 - 2005

Diagram ref no 2, 3, 4 and 5

This comprehensive kit is designed to replace both engine mounts and all associated mounting hardware in one package.

Kit includes:
  • 2 × OE Match engine mounts (99337504909)
  •  4 × Genuine Porsche bolts (90037815901)
  •  4 × Genuine Porsche washers (PCG02513402)
  •  2 × Genuine Porsche locknuts (99908421501)

The engine mounts are manufactured to OE specifications, ensuring precise fitment and optimal vibration damping. Featuring a hydraulic (fluid-filled) design, they effectively absorb engine movement and reduce noise, maintaining the refined driving characteristics expected from a Porsche 996 Turbo.

Including genuine Porsche hardware ensures correct torque, alignment, and long-term reliability, eliminating the risks associated with reusing old or stretched fixings.

This kit stabilises the engine within the chassis while minimising vibration and movement during acceleration, braking, and cornering. It restores smooth power delivery, improves driving comfort, and ensures proper drivetrain alignment.

Replacing both mounts and hardware together provides a complete system refresh, eliminating common sources of vibration and noise.

Function
•  Supports and secures the engine in position
•  Absorbs vibration and reduces cabin noise
•  Maintains correct drivetrain alignment
•  Ensures secure installation with OE-spec hardware

This kit is essential for maintaining performance, comfort, and drivetrain integrity.

Over time, engine mounts degrade due to heat, load, and fluid wear. This can result in increased vibration, excessive engine movement, and reduced driving comfort. Replacing both mounts along with new genuine hardware ensures proper installation, restores smooth operation, and protects surrounding drivetrain components from stress and premature wear.

When to replace
•  Increased vibration in cabin, steering, or pedals
•  Clunking noises during acceleration or gear changes
•  Visible wear or fluid leakage from mounts
•  Engine movement or misalignment
•  During engine or transmission service

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99337504909

您正在查看的产品与这些编号存在交叉引用关系